Lexus IS300h 2014 Navigation manual

101
1. BASIC OPERATION
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
■COMPASS
zTo scroll over the map, place the cursor
mark in the desired position and then press
and hold the Remote Touch knob. The map
will continue scrolling in that direction until
the knob is released.
Information about the destination, cur-
rent position and a compass is displayed
on the screen.
INFORMATION
●
The destination mark is displayed in the
direction of the destination. When driv-
ing, refer to the longitude and latitude
coordinates, and the compass, to make
sure that the vehicle is headed in the
direction of the destination.
●When the vehicle travels out of the cover-
age area, the guidance screen changes to
the compass mode screen.
SCREEN SCROLL
OPERATION
Use the scroll feature to move the de-
sired point to the centre of the screen for
looking at a point on the map screen that
is different from the current position.
No.Information/FunctionPage
Cursor mark
Select to register the cursor
location as area to avoid.102
Select to return to the cur-
rent position. 
Select to register as a mem-
ory point. To change the
icon, name, etc.: →P.156

Select to set as a destina-
tion.131
Distance from the current
position to the cursor mark
IS_Navi_EE_53C71E.book 101 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

102
1. BASIC OPERATION
IS300h/250_Navi_EE
1Select “A v o i d ”.
2Select either or to
change the size of the area to be avoid-
ed and select “OK”.
REGISTERING THE CURSOR
LOCATION AS AN AREA TO
AVOID
A specific location on the map screen
can be set as an area to avoid using the
scroll function.INFORMATION
●
If a destination is entered in the area to
avoid or the route calculation cannot be
made without running through the area to
avoid, a route passing through the area to
be avoided may be shown.
●Up to 10 locations can be registered as
areas to avoid.
IS_Navi_EE_53C71E.book 102 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

103
1. BASIC OPERATION
IS300h/250_Navi_EE
NAVIGATION SYSTEM
31Select one of the 8 directional arrows to
move the cursor to the desired point.
ADJUSTING LOCATION IN
SMALL INCREMENTS
The exact target location can be adjust-
ed in small increments by selecting one
of the 8 directional arrows.
IS_Navi_EE_53C71E.book 103 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

104
1. BASIC OPERATION
IS300h/250_Navi_EE
3. MAP SCREEN INFORMATION
1Select “Menu” on the map screen.
2Select “Show POI”.
3Select the desired POI categories and
select “OK”.
DISPLAYING POI ICONS
POI icons such as petrol stations and
restaurants can be displayed on the map
screen. Their location can also be set as
a destination and used for route guid-
ance.
No.Information/FunctionPage
Displays up to 5 selected
POI icons on the map
screen

Select to turn the POI icons
on the map screen off.
Displays up to 6 POI icons
as favourite POI categories172
Select to display other POI
categories if the desired
POIs cannot be found on
the screen.
105
Select to search for the
nearest POIs. Then select
one of the categories.
105
IS_Navi_EE_53C71E.book 104 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

105
1. BASIC OPERATION
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
■SELECTING OTHER POI ICONS
TO BE DISPLAYED
1Select “Other POI’s”.
2Select the desired POI categories and
select “OK”.
“List all categories”: Select to display all
POI categories. To add more POI catego-
ries, select “More”.
■DISPLAYING THE LOCAL POI
LIST
1Select “List nearest POI’s”.
2Select the desired POI.
“On this route”: Select to search for POIs
along the route. When set to on, the indica-
tor will illuminate.
3Check that the selected POI is dis-
played on the map screen. (→P.101)
POIs that are within 20 miles (30 km) of
the current position will be listed from
among the selected categories.
IS_Navi_EE_53C71E.book 105 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

106
1. BASIC OPERATION
IS300h/250_Navi_EE
1Select “Menu” on the map screen.
2Select “Start route trace”.
3Check that the traveled line is displayed.
■STOP RECORDING THE ROUTE
TRACE
1Select “Stop route trace”.
2A confirmation screen will be displayed.
“Yes”: Select to keep the recorded route
trace.
“No”: Select to erase the recorded route
trace.
ROUTE TRACE
Up to 124 miles (200 km) of the trav-
eled route can be stored and retraced
on the display. This feature is available
when the map scale is 30miles (50 km)
or less.
START RECORDING THE
ROUTE TRACE
zTo edit the route trace name or confirm
the start point, etc.: →P.1 6 5
IS_Navi_EE_53C71E.book 106 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

107
1. BASIC OPERATION
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1 Place the cursor over an icon.
2Select “Info”.
XPOI informationXMemory point information
XDestination information
XTraffic information
XParking information
DISPLAYING INFORMATION
ABOUT THE ICON WHERE
THE CURSOR IS SET
When the cursor is placed over an icon
on the map screen, the name bar is dis-
played on the upper part of the screen. If
“Info” appears on the right side of the
name bar, the detailed information can
be displayed.
IS_Navi_EE_53C71E.book 107 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

108
1. BASIC OPERATION
IS300h/250_Navi_EE
No.Function
Select to set as a destination.
(→P.131) If a destination has already
been set, “Add to ” and “Replace
” will be displayed.
“A d d t o ”: Select to add a destina-
tion.
“Replace ”: Select to delete the
existing destination(s) and set a new
one.
Select to register as a memory point.
Select to call the registered tele-
phone number.
Select to edit a memory point.
(→P.156)
Select to delete a memory point.
Select to display a QR code. Desti-
nation information can be acquired
by scanning the QR code with a cel-
lular phone.
Select to delete a destination.
Select to display detailed informa-
tion.
INFORMATION
●
Even when traffic/parking information is
not currently being received, traffic infor-
mation and “Info” will be displayed for a
while after traffic information has been
received.
STANDARD MAP ICONS
IconInformation
Town with > 1 million people
Town with 500,000-1 mil-
lion people
Town with 200,000-
500,000 people
Town with 100,000-
200,000 people
Town with 20,000-
100,000 people
Town with 10,000-20,000
people
Town with < 10,000 people
Park/Monument
Golf Course
Airport
Hospital/Polyclinic
Shopping centre
University/College
IS_Navi_EE_53C71E.book 108 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

109
1. BASIC OPERATION
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
4. TRAFFIC AND PARKING INFORMATION
*: Can only be used when receiving RDS-TMC
or TPEG (Transport Protocol Experts Group)
information. Depending on the country or ar-
ea, receiving RDS-TMC and TPEG informa-
tion may not be possible.
1Press the “MENU” button on the
Remote Touch.
2Select “Info”.
Traffic information, traffic prediction in-
formation and parking lot information
can be viewed.
zThe following 3 methods are available to
receive the above information:
• R D S -T M C * ( R a d i o D a t a S y s t e m -Tr a f f i c
Message Channel) using FM signals
• TPEG*-TEC (Traffic Event Compact),
TPEG*-TFP (Traffic Flow Prediction)
and TPEG*-PKI (Live Parking Informa-
tion) using DAB
• TPEG*-TEC, TPEG*-TEP and TPEG*-
PKI via the internet by using Wi-Fi
® or a
cellular phone
For detailed information about connec-
tion methods for a Wi-Fi® device or cel-
lular phone: →P.50, 69
zReceiving information using a cellular
phone
• In order to use this service, a
Bluetooth
® DUN/PAN compatible cel-
lular phone with sufficient network cov-
erage and a SIM card with a contract
that allows access to the internet are
required.
• When using this service, depending on
your telephone subscription, some
related fees might apply.
• When a cellular phone is used in a
roaming situation (when outside the
geographical coverage area of mobile
network provider) connection fees will
be more expensive.
DISPLAYING TRAFFIC AND
TRAFFIC PREDICTION
INFORMATION
IS_Navi_EE_53C71E.book 109 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

110
1. BASIC OPERATION
IS300h/250_Navi_EE
3Select “Traffic information”.
4Select the desired item.
■DISPLAYING TRAFFIC INFORMA-
TION
1Display the “Traffic” screen. (→P.109)
2Select “Traffic information”.
3Select the desired traffic event.
zA list of traffic information and the country
in which it can be received is displayed.
“On current road”: Select to display traffic
information for the current road.
No.Function
Select to display a list of current traf-
fic information.
Select to display a map with predic-
tive traffic data.
TRAFFIC INFORMATION
Traffic events near the current position
or the cursor position can be viewed as a
list.
IS_Navi_EE_53C71E.book 110 ページ ２０１４年５月２９日　木曜日　午前１１時２２分