phone Lexus IS300h 2014 Navigation manual

62
2. NETWORK SETTINGS
IS300h/250_Navi_EE
1Select the desired device to be edited.
2Select “Device info”.
3Confirm and change the Bluetooth®
device information.
EDITING THE Bluetooth®
DEVICE INFORMATION
The Bluetooth
® device’s information
can be displayed on the screen. The dis-
played information can be edited.
No.Information
The name of the Bluetooth® device.
Can be changed to a desired name.
(→P.63)
Device address is unique to the de-
vice and cannot be changed.
The telephone number of the
Bluetooth® phone.
Compatibility profile of the
Bluetooth® device.
Select to set the Bluetooth® audio
player connection method. (→P.63)
Select to reset all setup items.
IS_Navi_EE_53C71E.book 62 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

63
2. NETWORK SETTINGS
IS300h/250_Navi_EE
BASIC FUNCTION
2
■CHANGING A DEVICE NAME
1Select “Device name”.
2Enter the name and select “OK”.
■SETTING AUDIO PLAYER CON-
NECTION METHOD
1Select “Connect audio player from”.
2Select the desired connection method.
“Vehicle”: Select to connect the audio sys-
tem to the audio player.
“Device”: Select to connect the audio play-
er to the audio system.
zDepending on the audio player, the “Vehi-
cle” or “Device” connection method may
be best. As such, refer to the manual that
comes with the audio player.
zTo reset the connection method, select
“Defaults”.
INFORMATION
●
If 2 Bluetooth® devices have been regis-
tered with the same device name, the
devices can be distinguished referring to
the device’s address.
●Depending on the type of telephone,
some information may not be displayed.
INFORMATION
●
Even if the device name is changed, the
name registered in your Bluetooth®
device does not change.
IS_Navi_EE_53C71E.book 63 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

64
2. NETWORK SETTINGS
IS300h/250_Navi_EE
1Display the “Bluetooth*” screen.
(→P.56)
2Select “Detailed Bluetooth* settings”.
3Select the desired item to be set.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
“Detailed Bluetooth* settings”
SCREEN
The Bluetooth® settings can be con-
firmed and changed.
No.InformationPage
Select to set Bluetooth®
connection on/off. 65
Displays system name. Can
be changed to a desired
name.65
PIN code used when the
Bluetooth® device was reg-
istered. Can be changed to
a desired code.65
Device address is unique to
the device and cannot be
changed.
Select to set the telephone
connection status display
on/off.
Select to set the connection
status display of the audio
player on/off.
Compatibility profile of the
system. 
Select to reset all setup
items.
IS_Navi_EE_53C71E.book 64 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

67
2. NETWORK SETTINGS
IS300h/250_Navi_EE
BASIC FUNCTION
2
6Select “Country”.
7Select a country.
zThe previous screen will be displayed.
8Select “Provider” on the “Communica-
tion settings” screen.
9Select your mobile network provider.
10Select “OK” on the “Communication
settings” screen.
zIf “Other ” is selected for country and/or
mobile network provider, the “Detail set-
tings” screen will be displayed. (→P. 6 8 )
zThe system will automatically set the details
of the mobile network provider’s informa-
tion and perform a communication con-
nection test.
zIf the setting cannot be performed auto-
matically, the “Detail settings” screen will be
displayed. (→P. 6 8 )
11When the cellular phone has been con-
nected successfully, “Data connection
successful.” will be displayed on the
screen. The online search and importing
memory points function will be avail-
able.
zBefore performing a communication
connection test, a confirmation screen
will be displayed in accordance with the
connected service settings. (→P. 3 8 9 )
zWhen accessing Lexus portal site using a
cellular phone, your user name and pass-
word will be required. (→P. 6 8 )
IS_Navi_EE_53C71E.book 67 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

82
3. OTHER SETTINGS
IS300h/250_Navi_EE
1Display the “General settings” screen.
(→P.75)
2Select “Delete personal data”.
3Select “Delete”.
4Select “Yes” when the confirmation
screen appears.
zRegistered or changed personal settings
will be deleted or returned to their default
conditions.
Fo r example:
• General settings
• Navigation settings*
• Audio settings
•Telephone settings
• Connected service settings*
*: With navigation function
DELETING PERSONAL DATA
NOTICE
●With navigation function: Make sure the
map SD card is inserted when deleting
personal data. The personal data cannot
be deleted when the map SD card is
removed. To delete the data, after insert-
ing the map SD card, turn the engine
<power> switch to ACCESSORY or
IGNITION ON <ON> mode.
IS_Navi_EE_53C71E.book 82 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

88
3. OTHER SETTINGS
IS300h/250_Navi_EE
3Select the desired item to be edited.■EDITING DEALER OR CONTACT
NAME
1Select “Dealer” or “Contact”.
2Enter the name and select “OK”.
■EDITING THE LOCATION
1Select “Location”.
2Scroll the map to the desired point
(→P.103) and select “OK”.
■EDITING TELEPHONE NUMBER
1Select “Tel. no.”.
2Enter the telephone number and select
“OK”.
No.FunctionPage
Select to enter the name of
a dealer.88
Select to enter the name of
a dealer member.88
Select to set the location.88
Select to set the telephone
number.88
Select to set the displayed
dealer as a destination.131
Select to delete the dealer
information displayed on
the screen.

IS_Navi_EE_53C71E.book 88 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

90
IS300h/250_Navi_EE1. QUICK REFERENCE .............................. 92
MAP SCREEN ............................................................. 92
NAVIGATION MENU SCREEN ..................... 94
2. MAP SCREEN OPERATION ................ 96
CURRENT POSITION DISPLAY ..................... 96
MAP SCALE................................................................. 97
ORIENTATION OF THE MAP .......................... 98
SWITCHING MAP
CONFIGURATIONS ......................................... 99
SCREEN SCROLL OPERATION .................... 101
ADJUSTING LOCATION IN SMALL
INCREMENTS ....................................................... 103
3. MAP SCREEN INFORMATION........ 104
DISPLAYING POI*2 ICONS ............................ 104
ROUTE TRACE ........................................................ 106
DISPLAYING INFORMATION
ABOUT THE ICON WHERE
THE CURSOR IS SET......................................... 107
STANDARD MAP ICONS ................................ 108
4. TRAFFIC AND PARKING
INFORMATION .................................... 109
DISPLAYING TRAFFIC AND TRAFFIC
PREDICTION INFORMATION ................... 109
PARKING INFORMATION ............................... 113
1. DESTINATION SEARCH
SCREEN..................................................... 116
2. SEARCH OPERATION .......................... 118
SELECTING THE SEARCH AREA ................. 119
SETTING HOME AS DESTINATION ............ 119
SETTING QUICK ACCESS AS
DESTINATION...................................................... 120
SEARCHING BY ADDRESS ............................. 120
SEARCHING BY POI*
2....................................... 123
SEARCHING BY MAP......................................... 124
SEARCHING BY MEMORY POINTS ......... 124
SEARCHING FROM PREVIOUS
DESTINATIONS ................................................... 125
SEARCHING BY INTERSECTION ............... 126
SEARCHING BY MOTORWAY
ENTRANCE/EXIT ............................................... 127
SEARCHING BY COORDINATES .............. 128
SEARCHING BY TELEPHONE
NUMBER.................................................................. 128
SEARCHING BY POI*
2 NEAR
CURSOR .................................................................. 129
SEARCHING BY UK/NL POSTAL
CODE ....................................................................... 130
3. STARTING ROUTE GUIDANCE ....... 131
STARTING ROUTE GUIDANCE .................... 131
SUSPENDING GUIDANCE ............................. 135
1BASIC OPERATION2DESTINATION SEARCH
IS_Navi_EE_53C71E.book 90 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

92
IS300h/250_Navi_EE
1. BASIC OPERATION
1. QUICK REFERENCE
MAP SCREEN
To display this screen, press the “MENU” button on the Remote Touch, then select
“Nav”, and select if the navigation menu screen is displayed.
No.NameFunctionPage
2D north up, 2D
heading up or 3D
heading up sym-
bolIndicates whether the map orientation is set to
north-up or heading-up. In 3D map, only a head-
ing-up view is available.98
“GPS” mark
(Global Position-
ing System)Shows that the vehicle is receiving signals from
the GPS184
Status bar
Displays the condition of Wi-Fi® and Bluetooth®
connections, the level of reception and the
amount of battery charge left for a cellular phone.18
IS_Navi_EE_53C71E.book 92 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

108
1. BASIC OPERATION
IS300h/250_Navi_EE
No.Function
Select to set as a destination.
(→P.131) If a destination has already
been set, “Add to ” and “Replace
” will be displayed.
“A d d t o ”: Select to add a destina-
tion.
“Replace ”: Select to delete the
existing destination(s) and set a new
one.
Select to register as a memory point.
Select to call the registered tele-
phone number.
Select to edit a memory point.
(→P.156)
Select to delete a memory point.
Select to display a QR code. Desti-
nation information can be acquired
by scanning the QR code with a cel-
lular phone.
Select to delete a destination.
Select to display detailed informa-
tion.
INFORMATION
●
Even when traffic/parking information is
not currently being received, traffic infor-
mation and “Info” will be displayed for a
while after traffic information has been
received.
STANDARD MAP ICONS
IconInformation
Town with > 1 million people
Town with 500,000-1 mil-
lion people
Town with 200,000-
500,000 people
Town with 100,000-
200,000 people
Town with 20,000-
100,000 people
Town with 10,000-20,000
people
Town with < 10,000 people
Park/Monument
Golf Course
Airport
Hospital/Polyclinic
Shopping centre
University/College
IS_Navi_EE_53C71E.book 108 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

109
1. BASIC OPERATION
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
4. TRAFFIC AND PARKING INFORMATION
*: Can only be used when receiving RDS-TMC
or TPEG (Transport Protocol Experts Group)
information. Depending on the country or ar-
ea, receiving RDS-TMC and TPEG informa-
tion may not be possible.
1Press the “MENU” button on the
Remote Touch.
2Select “Info”.
Traffic information, traffic prediction in-
formation and parking lot information
can be viewed.
zThe following 3 methods are available to
receive the above information:
• R D S -T M C * ( R a d i o D a t a S y s t e m -Tr a f f i c
Message Channel) using FM signals
• TPEG*-TEC (Traffic Event Compact),
TPEG*-TFP (Traffic Flow Prediction)
and TPEG*-PKI (Live Parking Informa-
tion) using DAB
• TPEG*-TEC, TPEG*-TEP and TPEG*-
PKI via the internet by using Wi-Fi
® or a
cellular phone
For detailed information about connec-
tion methods for a Wi-Fi® device or cel-
lular phone: →P.50, 69
zReceiving information using a cellular
phone
• In order to use this service, a
Bluetooth
® DUN/PAN compatible cel-
lular phone with sufficient network cov-
erage and a SIM card with a contract
that allows access to the internet are
required.
• When using this service, depending on
your telephone subscription, some
related fees might apply.
• When a cellular phone is used in a
roaming situation (when outside the
geographical coverage area of mobile
network provider) connection fees will
be more expensive.
DISPLAYING TRAFFIC AND
TRAFFIC PREDICTION
INFORMATION
IS_Navi_EE_53C71E.book 109 ページ ２０１４年５月２９日　木曜日　午前１１時２２分