Lexus IS300h 2014 Navigation manual

321
2. LEXUS PARKING ASSIST-SENSOR
IS300h/250_Navi_EE
PERIPHERAL MONITORING SYSTEM
6
1Display the “LEXUS park assist set-
tings” screen. (→P.319)
2Select “Front” or “Rear”.
zSelecting “Front” or “Rear” to switch the
distance for the front or back sensors dis-
play and tone indication, from long distance
to short distance, or from short distance to
long distance.
SETTING A DISPLAY AND
TONE INDICATION
Front and back sensors display and tone
indication can be set.
IS_Navi_EE_53C71E.book 321 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

322
2. LEXUS PARKING ASSIST-SENSOR
IS300h/250_Navi_EE
IS_Navi_EE_53C71E.book 322 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

7
323
IS300h/250_Navi_EE
7 2
1
3
4
5
6
8
1. QUICK REFERENCE ........................... 324
2. SOME BASICS ........................................ 325
REGISTERING/CONNECTING
A Bluetooth® PHONE...................................... 326
USING THE TELEPHONE
SWITCH/MICROPHONE ............................ 326
SPEECH COMMAND SYSTEM ................... 327
ABOUT THE CONTACTS IN
THE CONTACT LIST ...................................... 328
WHEN SELLING OR DISPOSING OF
THE VEHICLE ..................................................... 328
3. CALLING ON THE Bluetooth®
PHONE ................................................... 329
BY FAVOURITES LIST ....................................... 330
BY CALL HISTORY ............................................. 330
BY CONTACTS LIST ........................................... 332
BY DIAL PAD ........................................................... 334
BY OFF HOOK SWITCH ................................. 335
SOS ............................................................................... 335
4. RECEIVING ON THE Bluetooth®
PHONE ................................................... 337
INCOMING CALLS............................................. 337
5. TALKING ON THE Bluetooth®
PHONE ................................................... 338
INCOMING CALL WAITING....................... 340
6. Bluetooth® PHONE MESSAGE
FUNCTION ............................................ 341
RECEIVING A MESSAGE ................................ 342
CHECKING MESSAGES.................................. 343
REPLYING TO A MESSAGE
(QUICK REPLY) ................................................. 344
CALLING THE MESSAGE SENDER ......... 345
1. TELEPHONE SETTINGS ..................... 347
TELEPHONE SETTINGS SCREEN .............. 347
“Sound settings” SCREEN .................................. 348
“Messaging settings” SCREEN.......................... 349
“Telephone display settings” SCREEN.......... 350
“Lexus Euro assistance 24 settings”
SCREEN ................................................................... 351
2. CONTACT SETTINGS ......................... 353
“Contacts” SCREEN ............................................. 354
“Favourites” SCREEN........................................... 359
“Delete call history” SCREEN ............................ 363
1. TROUBLESHOOTING ........................ 364
1
TELEPHONE OPERATION
(HANDS-FREE SYSTEM FOR
CELLULAR PHONES)
2SETUP
3WHAT TO DO IF...
TELEPHONE
For vehicles sold outside Europe, some of the functions cannot be operated while driving.
IS_Navi_EE_53C71E.book 323 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

324
IS300h/250_Navi_EE
1. TELEPHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
1. QUICK REFERENCE
The telephone top screen can be used to make a telephone call. To display this screen,
press the “MENU” button on the Remote Touch and select “Telephone”, or the
switch on the steering wheel.
FunctionPage
Telephone operation
Registering/connecting Bluetooth® device50
Calling on the Bluetooth® phone329
Receiving on the Bluetooth® phone337
Talking on the Bluetooth® phone338
Message functionUsing the Bluetooth® phone message function341
Setting up a telephone
Telephone settings347
Contact settings353
Bluetooth® settings56
IS_Navi_EE_53C71E.book 324 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

325
1. TELEPHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
IS300h/250_Navi_EE
TELEPHONE
7
2. SOME BASICS
The hands-free system enables calls to
be made and received without having to
take your hands off the steering wheel.
This system supports Bluetooth
®.
Bluetooth® is a wireless data system
that enables cellular phones to be used
without being connected by a cable or
placed in a cradle.
The operating procedure of the tele-
phone is explained here.
CAUTION
●Use a cellular phone or connect the
Bluetooth® phone only when safe and
legal to do so.
●Your audio unit is fitted with Bluetooth
®
antennas. People with implantable car-
diac pacemakers, cardiac resynchroniza-
tion therapy-pacemakers or implantable
cardioverter defibrillators should main-
tain a reasonable distance between
themselves and the Bluetooth
® antennas.
The radio waves may affect the operation
of such devices.
●Before using Bluetooth
® devices, users
of any electrical medical device other
than implantable cardiac pacemakers,
cardiac resynchronization therapy-pace-
makers or implantable cardioverter
defibrillators should consult the manufac-
turer of the device for information about
its operation under the influence of radio
waves. Radio waves could have unex-
pected effects on the operation of such
medical devices.
NOTICE
●Do not leave your cellular phone in the
vehicle. The temperature inside may rise
to a level that could damage the tele-
phone.
INFORMATION
●If your cellular phone does not support
Bluetooth®, this system cannot function.
●In the following conditions, the system
may not function:
• The cellular phone is turned off.
• The current position is outside the com-
munication area.
• The cellular phone is not connected.
• The cellular phone has a low battery.
●When using Bluetooth
® audio and
hands-free system at the same time, the
following problems may occur:
•The Bluetooth
® connection may be cut.
• Noise may be heard on the Bluetooth
®
audio playback.
IS_Navi_EE_53C71E.book 325 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

326
1. TELEPHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
IS300h/250_Navi_EE
XSteering switch
Volume control switch
zPress the “+” side to increase the volume.
zPress the “-” side to decrease the volume.
Off hook switch
On hook switch
XMicrophone
REGISTERING/
CONNECTING A Bluetooth®
PHONE
To use the hands-free system for cellular
phones, it is necessary to register a cel-
lular phone with the system. (→
P. 5 0)
Bluetooth® PHONE
CONDITION DISPLAY
The condition of the Bluetooth
® phone
appears on the upper right side of the
screen. (→P.18)
USING THE TELEPHONE
SWITCH/MICROPHONE
By pressing the telephone switch, a call
can be received or ended without taking
your hands off the steering wheel.
The microphone is used when talking on
the telephone.
IS_Navi_EE_53C71E.book 326 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

327
1. TELEPHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
TELEPHONE
IS300h/250_Navi_EE
7
SPEECH COMMAND SYSTEM
Press this switch to operate the speech
command system.
zThe speech command system and its list
of commands can be operated.
(→P. 2 74 )
INFORMATION
●The other party’s voice will be heard from
the front speakers. The audio/visual sys-
tem will be muted during telephone calls
or when hands-free speech commands
are used.
●Talk alternately with the other party on
the telephone. If both parties speak at the
same time, the other party may not hear
what has been said. (This is not a malfunc-
tion.)
●Keep call volume down. Otherwise, the
other party’s voice may be audible out-
side the vehicle and voice echo may
increase. When talking on the telephone,
speak clearly towards the microphone.
●The other party may not hear you clearly
when:
• Driving on an unpaved road. (Making
excessive traffic noise.)
• Driving at high speeds.
• The roof or windows are open.
• The air conditioning vents are pointed
towards the microphone.
• The sound of the air conditioning fan is
loud.
•There is a negative effect on sound
quality due to the telephone and/or net-
work being used.
IS_Navi_EE_53C71E.book 327 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

328
1. TELEPHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
IS300h/250_Navi_EE
zThe following data is stored for every regis-
tered telephone. When another telephone
is connected, the following registered data
cannot be read:
• Contact data
• Call history data
•Favourites data
• Image data
• All telephone settings
• Message settingszThe following data in the system can be ini-
tialized:
• Contact data
• Call history data
• Favourites data
•Image data
• All telephone settings
• Message settings
ABOUT THE CONTACTS IN
THE CONTACT LIST
INFORMATION
●When a telephone’s registration is
deleted, the above-mentioned data is
also deleted.
WHEN SELLING OR
DISPOSING OF THE VEHICLE
A lot of personal data is registered when
the hands-free system is used. When
selling or disposing of the vehicle, initial-
ize the data. (→P.82)
INFORMATION
●Once initialized, the data and settings will
be erased. Pay much attention when ini-
tializing the data.
IS_Navi_EE_53C71E.book 328 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

329
1. TELEPHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
IS300h/250_Navi_EE
TELEPHONE
7
3. CALLING ON THE Bluetooth® PHONE
1Press the “MENU” button on the
Remote Touch.
2Select “Telephone”.
3Select the desired button to call from.
zThe telephone top screen can be displayed
by pressing the switch on the steering
wheel.
*: With navigation function
After a Bluetooth® phone has been reg-
istered, a call can be made using the
hands-free system. There are several
methods by which a call can be made, as
described below.
How to make a call listPage
By favourites list330
By call history330
By contacts list332
By dial pad33 4
By e-mail/SMS/MMS345
By POI call*107
SOS335
By off hook switch335
By speech command system280
IS_Navi_EE_53C71E.book 329 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

330
1. TELEPHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
IS300h/250_Navi_EE
1Display the telephone top screen.
(→P.329)
2Select “Favourites”.
3Select the desired contact.
“Lexus Euro assistance 24”: →P.336
4Select the desired number.
5Check that the “Call” screen is dis-
played.
1Display the telephone top screen.
(→P.329)
2Select “Call history”.
3Select or the desired contact from
the list.
BY FAVOURITES LIST
Calls can be made using registered con-
tacts which can be selected from a con-
tact list. (→P.359)
BY CALL HISTORY
Up to 45 call history items (missed, in-
coming and outgoing) can be selected
from the “Call history” screen.
No.Function
All calls. (missed, incoming or outgo-
ing)
Calls that were missed.
Calls that were received.
Calls that were sent.
The icons of call type are displayed.
: Missed call
: Incoming call
: Outgoing call
IS_Navi_EE_53C71E.book 330 ページ ２０１４年５月２９日　木曜日　午前１１時２２分