audio lexus LC500 2018 Navigation Manual

41
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
6Select “Register from phone”.
7 Register the Bluetooth® device
using your Bluetooth® device.
 A PIN code is not required for SSP
(Secure Simple Pairing) compatible
Bluetooth® devices. Depending on
the type of Bluetooth® device being
connected, a message confirming
registration may be displayed on the
Bluetooth® device’s screen.
Respond and operate the
Bluetooth® device according to the
confirmation message.
8 Check that the following screen is
displayed, indicating pairing was
successful.
 The system is connecting to the reg-
istered device.
 At this stage, the Bluetooth® func-
tions are not yet available.
9 Check that “Connected” is dis-
played and registration is complete.
 If an error message is displayed, fol-
low the guidance on the screen to
try again.
●If a cellular phone does not operate prop-
erly after being connected, turn the cellu- lar phone off and on and then connect it again.
To use the Bluetooth® Audio, it is nec-
essary to register an audio player with
the system.
Once the player has been registered, it
is possible to use the Bluetooth®
Audio.
This operation cannot be performed
while driving.
For details about registering a
Bluetooth® device: P.44
1 Turn the Bluetooth® connection
setting of your audio player on.
 This function is not available when
the Bluetooth® connection setting
of your audio player is set to off.
Registering a Bluetooth® audio
player for th e first time

42
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
2Press the “MENU” button on the
Remote Touch.
3 Select “Media”.
4 Select “Source” on the sub menu.
5 Select “Bluetooth*”.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
6 Select “Yes” to register a audio
player.
7 Follow the steps in “Registering a
Bluetooth® phone for the first time”
from step 5. (P.39)
■Bluetooth® Core Specification
 Ver. 2.0 (Recommended: Ver. 4.1
+EDR)
■Profiles:
 HFP (Hands Free Profile) Ver. 1.0
(Recommended: Ver. 1.7)
• This is a profile to allow hands-free
phone calls using a cellular phone or
head set. It has outgoing and incoming
call functions.
 OPP (Object Push Profile) Ver. 1.1
(Recommended: Ver. 1.2)
• This is a profile to transfer contacts data.
 PBAP (Phone Book Access Profile)
Ver. 1.0 (Recommended: Ver. 1.2)
• This is a profile to transfer phonebook
data.
 MAP (Message Access Profile)
Recommended: Ver. 1.2
• This is a profile to use phone message
functions.
 PAN (Personal Area Networking)
Recommended: Ver. 1.0
• This is a profile to use the “Connected
services” function.
 A2DP (Advanced Audio Distribu-
tion Profile) Ver. 1.0 (Recom-
mended: Ver. 1.3)
• This is a profile to transmit stereo audio
or high quality sound to the audio sys-
tem.
 AVRCP (Audio/Video Remote
Control Profile) Ver. 1.0 (Recom-
mended: Ver. 1.6)
Profiles

44
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
(P.44)
Deleting a Bluetooth® device
( P.44)
Editing the Bluetooth® device
information and system settings
( P.49)
Up to 5 Bluetooth® devices can be
registered.
Bluetooth® compatible phones (HFP)
and audio players (AVP) can be regis-
tered simultaneously.
This operation cannot be performed
while driving.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Add new device”.
When another Bluetooth® device is
connected
 To disconnect the Bluetooth®
device, select “Yes”.
When 5 Bluetooth® devices have
already been registered
 A registered device needs to be
replaced. Select “Yes”, and select
the device to be replaced.
5 Follow the steps in “Registering a
Bluetooth® phone for the first time”
from step 6. (P.39)
This operation cannot be performed
while driving.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Remove device”.
5 Select the desired device.
6 Select “Yes” when the confirmation
screen appears.
7 Check that a confirmation screen is
displayed when the operation is
complete.
●When deleting a Bluetooth® phone, the contact data will be deleted at the same
time.
Registering a Bluetooth® device
C
D
Deleting a Bluetooth® device

45
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
Up to 5 Bluetooth® devices (Phones
(HFP) and audio players (AVP)) can be
registered.
If more than 1 Bluetooth® device has
been registered, select which device to
connect to.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Registered device”.
5 Select the device to be connected.
: Phone
: Audio player
 The profile icon for a currently con-
nected device will be displayed in
color.
 Selecting a profile icon which is not
currently connected will switch the
connection to the function.
 If the desired Bluetooth® device is
not on the list, select “Add new
device” to register the device.
( P.44)
6 Select the desired connection.
7 Check that a confirmation screen is
displayed when the connection is
complete.
 If an error message is displayed, fol-
low the guidance on the screen to
try again.
●It may take time if the device connection
is carried out during Bluetooth® audio
playback.
●Depending on the type of Bluetooth® device being connected, it may be neces-sary to perform additional steps on the
device.
●When disconnecting a Bluetooth®
device, it is recommended to disconnect using the system.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Phone” on the sub menu.
Connecting a Bluetooth®
device
Connecting a Bluetooth® device
in a different way (from phone
setup screen)

46
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
4Select “Connect phone”.
5 Select the device to be connected.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Phone” on the sub menu.
4 Select “Connect phone”.
5 Select the device to be connected.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select “Select device” on the sub
menu.
4 Select the device to be connected.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Media”.
3 Select “Source” on the sub menu.
4 Select “Bluetooth*”.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
5 Select “Connect”.
6 Select the device to be connected.
■Auto connection mode
To turn auto connection mode on, set
“Bluetooth* power” to on. ( P.49)
Leave the Bluetooth® device in a loca-
tion where the connection can be
established.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
 When the engine switch <power
switch> is in ACCESSORY or
IGNITION ON mode <ON mode>,
the system searches for a nearby
registered device.
 The system will connect with the
registered device that was last con-
nected, if it is nearby. When auto-
matic connection priority is set to on
and there is more than one regis-
tered Bluetooth® phone available,
the system will automatically con-
nect to the Bluetooth® phone with
the highest priority. ( P.49)
Connecting a Bluetooth® device
in a different way (from phone
setup screen)
Connecting a Bluetooth® device
in a different way (from phone top
screen)
Connecting a Bluetooth® device
in a different way (from
Bluetooth® audio top screen)

48
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
7Confirm and change the
Bluetooth® device information.
The name of the Bluetooth® device
is displayed. It can be changed to a
desired name. ( P.48)
Select to set the Bluetooth® audio
player connection method.
( P.48)
Device address is unique to the
device and cannot be changed.
Phone number is unique to the
Bluetooth® phone and cannot be
changed.
Compatibility profile is unique to
the Bluetooth® device and cannot
be changed.
Select to reset all setup items.
●If 2 Bluetooth® devices have been regis- tered with the same device name, the devices can be distinguished referring to
the device’s address.
●Depending on the type of phone, some
information may not be displayed.
1 Select “Device name”.
2 Enter the name and select “OK”.
●Even if the device name is changed, the
name registered in your Bluetooth® device does not change.
1 Select “Connect audio player
from”.
2 Select the desired connection
method.
“Vehicle”: Select to connect the audio sys- tem to the audio player.
“Device”: Select to connect the audio player to the audio system.
 Depending on the audio player, the
“Vehicle” or “Device” connection
method may be best. As such, refer
to the manual that comes with the
audio player.
A
B
C
D
E
F
Changing a device name
Setting audio player connection
method

50
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
(P.50)
Select to change the automatic
connection priority of the regis-
tered Bluetooth® audio players.
( P.50)
Select to reset all setup items.
●A newly registered Bluetooth® device will automatically be given the highest automatic connection priority.
■Changing phone automatic con-
nection priority
1 Select “Preferred phones”.
2 Select the desired Bluetooth®
device and select “Move up” or
“Move down” to change the pre-
ferred order.
■Changing audio player automatic
connection priority
1 Select “Preferred audio players”.
2 Select the desired Bluetooth®
device and select “Move up” or
“Move down” to change the pre-
ferred order.
1 Select “System information”.
2 Select the desired item to be set.
Displays system name. Can be
changed to a desired name.
( P.51)
PIN code used when the
Bluetooth® device was registered.
Can be changed to a desired code.
( P.51)
Device address is unique to the
C
D
Editing the system information
A
B
C

51
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
device and cannot be changed.
Select to set the phone connection
status display on/off.
Select to set the connection status
display of the audio player on/off.
Compatibility profile of the system
Select to reset all setup items.
■Editing the system name
1 Select “System name”.
2 Enter a name and select “OK”.
■Editing the PIN code
1 Select “System PIN code”.
2 Enter a PIN code and select “OK”.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Wi-Fi*” on the sub menu.
4 Select the items to be set.
*:Wi-Fi® is a registered trademark of
Wi-Fi Alliance®.
D
E
F
G
Connecting to internet via
Wi-Fi®
Using the Wi-Fi® function, this sys-
tem can connect to the internet,
which allows the use of the con-
nected services, traffic information,
etc.
Displaying the Wi-Fi® settings
screen

54
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
delete networks from the list.
( P.54)
Select to set automatic connection
to network on/off. When set to on,
the system will automatically con-
nect to the preferred networks that
have been registered.
Select to set the automatic connec-
tion message notification display
on/off.
Select to reset all setup items.
*:Wi-Fi® is a registered trademark of
Wi-Fi Alliance®.
Any network connected to in the past
is set as a preferred network. The pri-
ority of the networks to connect to can
be changed.
1 Select “Reorder/Remove preferred
networks”.
2 Select the desired network and
select “Move up” or “Move down”
to change the connection priority
of the network.
“Remove”: Select to delete a network.
●If a network is being connected to, pre-
ferred network settings cannot be changed.
Reception level appears on the right
upper side of the screen. ( P.18)
●Communication standards
•802.11b •802.11g•802.11n
●Security•WEP
•WPA™*
Preferred network settings
B
C
D
Wi-Fi® function operating hints
WARNING
●Use Wi-Fi® devices only when safe
and legal to do so.
●Your audio unit is fitted with Wi-Fi® antennas. People with implantable car-
diac pacemakers, cardiac resynchro- nization therapy-pacemakers or implantable cardioverter defibrillators
should maintain a reasonable distance
between themselves and the Wi-Fi®
antennas. The radio waves may affect the opera-tion of such devices.
●Before using Wi-Fi® devices, users of
any electrical medical device other than implantable cardiac pacemakers, cardiac resynchronization therapy-
pacemakers or implantable cardio- verter defibrillators should consult the manufacturer of the device for infor-
mation about its operation under the influence of radio waves.Radio waves could have unexpected
effects on the operation of such medi- cal devices.
Conditions displayed with Wi-Fi®
icon
Specifications

56
-$@-$I@/BWJ@0.&@ &&

2-3. Other settings
2-3.Other settings
1Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select the items to be set.
 “Clock”
Select to change the time zone, set
the daylight saving time on/off and
set the automatic adjustment of the
clock on/off. ( P.57)
 “Language”
Select to change the language.
 “Display”
Select to adjust the contrast and
brightness of the screens, turn the
screen off, etc. ( P.58)
 “Voice recognition lang.”
Select to change the voice recogni-
tion language.
 “Theme setting”
Select to change the screen theme
setting.
 “Units of measurement”
Select to change the unit of measure
for distance/fuel consumption.
 “Auto change to screen”
Select to set automatic screen
changes from the audio/air condi-
tioning control screen to the previ-
ous screen to on/off. When set to
on, the screen will automatically
return to the previous screen from
the audio/air conditioning control
screen after 20 seconds.
 “Selection sound”
Select to set the selection sounds
on/off.
 “Pointer sound”
Select to set the pointer sounds
on/off.
 “Error sound”
Select to set the error sounds on/off.
 “Pointer sound volume”
Select to adjust the pointer sound
volume.
General settings
Settings are available for automatic
screen change, operation sounds,
etc.
Displaying the general settings
screen
General settings screen