ignition lexus LC500 2018 Navigation Manual

8
-$@-$I@/BWJ@0.&@ &&

Information for hybrid vehicles is writ-
ten in brackets next to the information
for gasoline vehicles
Example
Turn the engine switch*1 <power
switch>*2 to IGNITION ON
mode*1<ON mode>*2 mode.
*1:LC500
Reading this manual
Explains symbols used in this man-
ual
Symbols in this manual
SymbolsMeanings
WARNING:
Explains something that,
if not obeyed, could
cause death or serious
injury to people.
NOTICE:
Explains something that,
if not obeyed, could
cause damage to or a
malfunction in the vehi-
cle or its equipment.
Indicates operating or
working procedures. Fol-
low the steps in numeri-
cal order.
Symbols in illustrations
SymbolsMeanings
Indicates the action
(pushing, turning, etc.)
used to operate switches
and other devices.
Indicates the outcome of
an operation (e.g. a lid
opens).
SymbolsMeanings
Indicates the component
or position being
explained.
Means Do not, Do not do
this , or Do not let this
happen .
Different writing styles for gasoline
and hybrid vehicles

28
-$@-$I@/BWJ@0.&@ &&

2-1. Basic information before operation
2-1.Basic information before operation
After a few seconds, the “CAUTION”
screen will be displayed.
Waiting about 5 seconds or selecting
“Continue” switches to the last dis-
played screen.
When system response is extremely
slow, the system can be restarted.
1 Press and hold the “PWR•VOL”
knob for 3 seconds or more.
1 Use the touchpad of the Remote
Touch to select the desired button
on the screen.
2 The buttons on the screen can be
selected by either depressing or
double tapping on the touchpad.
Once a button has been selected,
the screen will change.
 When the pointer moves close to a
button, it will automatically snap to
Initial screen
When the engine switch <power
switch> is turned to ACCESSORY
or IGNITION ON mode <ON
mode>, the initial screen will be dis-
played and the system will begin
operating.
Caution screen
WARNING
●When the vehicle is stopped with the engine running <the hybrid system
operating>, always apply the parking brake for safety.
Restarting the system
How to use the Remote
Touch
This system can be operated by the
Remote Touch when the engine
switch <power switch> is in ACCES-
SORY or IGNITION ON mode
<ON mode>.
Touchpad operation

29
2
-$@-$I@/BWJ@0.&@ &&

2-1. Basic information before operation
Basic function
that button and the Remote Touch
feedback force (vibration) is gener-
ated by the touchpad.
This feedback force can be
adjusted. ( P.56)
 Press the “MENU” button on the
Remote Touch to display the menu
screen. ( P.16)
 The map screen can be displayed by
pressing the “MAP” button on the
Remote Touch. ( P.69)
 When is displayed on the
screen, select or press the
button on the Remote Touch
to return to the previous screen.
●Perform touchpad operations using a fin- ger. Do not use nails or other objects like
pens, etc.
●Perform pointer movement operations
using only one finger. The pointer can not be operated by using more than one fin-ger.
●When water or othe r foreign materials are on the touchpad, a malfunction may
occur. In those cases, wipe off the water or foreign materials and wait about 30 seconds before operating the touchpad.
●In the following cases, there is a possibility that the touchpad may not react nor-
mally: • When wearing gloves, etc.• When operated with a wet hand.
• When a film, paint-like substance, etc., is on the touchpad.• Near a TV tower, electrical power plant,
gas station, large display, airport or other facility that generate s strong radio waves or electrical noise.
• When wireless devices, such as portable radios and mobile phones are nearby.• When the following metal items are
placed on the touchpad: Coins
Keys Metal parts of a wallet or purseA card in which aluminum foil, etc., is
attached A box of cigarettes that uses aluminum foil
Disposable hand warmers Media such as CD/DVDs, USB cables, etc.
• When the temperature is -20°C (-4°F) or less
●If a hand or object was placed on the touchpad when the engine switch <power switch> is in ACCESSORY or IGNI-
TION ON mode <ON mode>, the touchpad may not react normally. In those cases, remove what was set on the
touchpad and operate it after waiting about 30 seconds. If there still no reac-tion, turn off the engine switch <power
switch> and then turn it to ACCESSORY or IGNITION ON mode <ON mode> again.
●Clean the touchpad frequently, as the reaction of the touch operation may
worsen if the touchpad is dirty. In order to prevent malfunctions when cleaning the touchpad, turn the engine switch <power
switch> off.
Operations are performed by touching
the touchpad with your finger.
NOTICE
●Do not allow the Remote Touch to
come into contact with food, liquid, stickers or lit cigarettes as doing so may cause damage.
●Do not subject the Remote Touch to
excessive pressure or strong impact as doing so may cause damage.
●Do not push the touchpad with a strong force or use a sharp pointed
object to operate the pad, as it is possi- ble to cause damage.
Touchpad gestures

46
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
4Select “Connect phone”.
5 Select the device to be connected.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Phone” on the sub menu.
4 Select “Connect phone”.
5 Select the device to be connected.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select “Select device” on the sub
menu.
4 Select the device to be connected.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Media”.
3 Select “Source” on the sub menu.
4 Select “Bluetooth*”.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
5 Select “Connect”.
6 Select the device to be connected.
■Auto connection mode
To turn auto connection mode on, set
“Bluetooth* power” to on. ( P.49)
Leave the Bluetooth® device in a loca-
tion where the connection can be
established.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
 When the engine switch <power
switch> is in ACCESSORY or
IGNITION ON mode <ON mode>,
the system searches for a nearby
registered device.
 The system will connect with the
registered device that was last con-
nected, if it is nearby. When auto-
matic connection priority is set to on
and there is more than one regis-
tered Bluetooth® phone available,
the system will automatically con-
nect to the Bluetooth® phone with
the highest priority. ( P.49)
Connecting a Bluetooth® device
in a different way (from phone
setup screen)
Connecting a Bluetooth® device
in a different way (from phone top
screen)
Connecting a Bluetooth® device
in a different way (from
Bluetooth® audio top screen)

47
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
■Connecting manually
When the auto connection has failed
or “Bluetooth* power” is turned off, it is
necessary to connect Bluetooth®
manually.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Follow the steps in “Connecting a
Bluetooth® device” from step 4.
( P.45)
■Reconnecting the Bluetooth®
phone
If a Bluetooth® phone is disconnected
due to poor reception from the
Bluetooth® network when the engine
switch <power switch> is in ACCES-
SORY or IGNITION ON mode <ON
mode>, the system automatically
reconnects the Bluetooth® phone.
The Bluetooth® device’s information
can be displayed on the screen. The
displayed information can be edited.
This operation cannot be performed
while driving.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Registered device”.
5 Select the desired device to be
edited.
6 Select “Device info”.
Editing the Bluetooth® device
information

49
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
The Bluetooth® settings can be con-
firmed and changed.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Detailed settings”.
5 Select the desired item to be set.
Select to set Bluetooth® connec-
tion on/off. ( P.49)
Select to change the automatic
connection priority of the regis-
tered Bluetooth® devices. ( P.49)
Select to edit the system informa-
tion. ( P.50)
Select to reset all setup items.
1 Select “Bluetooth* power”.
When “Bluetooth* power” is on:
The Bluetooth® device is automatically
connected when the engine switch
<power switch> is in ACCESSORY or
IGNITION ON mode <ON mode>.
When “Bluetooth* power” is off:
The Bluetooth® device is discon-
nected, and the system will not connect
to it next time.
●While driving, the auto connection state can be changed from off to on, but can-not be changed from on to off.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
The automatic connection priority of
the registered Bluetooth® devices can
be changed.
1 Select “Preferred device settings”.
2 Select the desired item to be set.
Select to set automatic connection
priority on/off.
Select to change the automatic
connection priority of the regis-
tered Bluetooth® phones.
“Detailed settings” screen
Changing “Bluetooth* power”
A
B
C
D
Setting automatic connection
priority
A
B

121
4
-$@-$I@/BWJ@0.&@ &&

4-1. Basic operation
Audio/visual system
■Certification
• CAUTION:
THIS PRODUCT IS A CLASS I LASER PRODUCT. USE OF CONTROLS OR
ADJUSTMENTS OR PERFOR- MANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADI- ATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR BY
YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
“PWR·VOL” knob: Press to turn the
audio/visual system on and off. The sys-
tem turns on in the last mode used.
Turn this knob to adjust the volume.
 A function that enables automatic
return to the previous screen from
the audio/visual screen can be
selected. ( P.56)
Using the audio control switch
1 Display the audio control screen.
2 Each time the “RADIO” or
“MEDIA” button is pressed, the
audio source changes.
“RADIO” button: To change radio
modes.
“MEDIA” button: To change media
modes.
From the audio source selection
screen
1 Display the audio control screen.
2 Select “Source” on the sub menu.
3 Select the desired source.
●Dimmed screen buttons cannot be oper- ated.
Some basics
This section describes some of the
basic features of the audio/visual
system. Some information may not
pertain to your system.
Your audio/visual system works
when the engine switch <power
switch> is in ACCESSORY or
IGNITION ON mode <ON mode>.
NOTICE
●To prevent the 12-volt battery from
being discharged, do not leave the audio/visual system on longer than necessary when the engine is not run-
ning <the hybrid system is not operat- ing>.
Turning the system on and off
Selecting an audio source

132
-$@-$I@/BWJ@0.&@ &&

4-3. Media operation
screen. (P.123)
The DVD control screen can be
reached by the following methods:
Using the audio control switch
1 Press the “MEDIA” button.
Using the Remote Touch
1 Press the “MENU” button on the
Re m ot e T ou ch , th e n se l ec t “M e d ia ”.
 Inserting a disc (P.122)
DVD
For safety reasons, the DVD video
discs can only be viewed when the
following conditions are met:
(a) The vehicle is completely
stopped.
(b) The engine switch <power
switch> is in ACCESSORY or
IGNITION ON mode <ON mode>.
(c) The parking brake is applied.
While driving in DVD video mode,
only the DVD’s audio can be heard.
The playback condition of some
DVD discs may be determined by
the DVD software producer. This
DVD player plays a disc as the soft-
ware producer intended. As such,
some functions may not work prop-
erly. Be sure to read the instruction
manual that comes with the individ-
ual DVD disc. ( P.155)
Overview

141
4
-$@-$I@/BWJ@0.&@ &&

4-3. Media operation
Audio/visual system
SORY or IGNITION ON mode <ON mode>, the system automatically recon-nects the portable player.
●If the Bluetooth® device is disconnected
on purpose, such as it was turned off, this does not happen. Reconnect the porta-ble player manually.
●Bluetooth® device information is regis-
tered when the Bluetooth® device is
connected to the Bluetooth® audio sys-
tem. When selling or disposing of the
vehicle, remove the Bluetooth® audio
information from the system. ( P.59)
●In some situations, sound output via the
Bluetooth® audio system may be out of sync with the connected device or output intermittently.
To use the Bluetooth® audio system, it
is necessary to register a Bluetooth®
device with the system.
Registering an additional device
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Add New Device”.
5 For more information: P.44
Selecting a registered device
1 Select “Connect” on the sub menu.
2 Select the device to be connected.
WARNING
●Do not operate the player’s controls or
connect to the Bluetooth® audio sys-
tem while driving.
●Your audio unit is fitted with
Bluetooth® antennas. People with
implantable cardiac pacemakers, car- diac resynchronization therapy-pace-makers or implantable cardioverter
defibrillators should maintain a reason- able distance between themselves and
the Bluetooth® antennas. The radio waves may affect the operation of such devices.
●Before using Bluetooth® devices, users of any electrical medical device other than implantable cardiac pace-
makers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should con-
sult the manufacturer of the device for information about its operation under the influence of radio waves. Radio
waves could have unexpected effects on the operation of such medical devices.
NOTICE
●Do not leave your portable player in the vehicle. In particular, high tempera-tures inside the vehicle may damage
the portable player.
Connecting a Bluetooth®
device

169
5
-$@-$I@/BWJ@0.&@ &&

5-1. Speech command system operation
Speech command system
• The command is incorrect or unclear. Note that certain words, accents or speech patterns may be difficult for the
system to recognize. • There is excessive background noise, such as wind noise.
●This system may not operate immediately after the engine switch <power switch> is
in ACCESSORY or IGNITION ON mode <ON mode>.
1 Press the talk switch.
 The speech command system is
activated.
 Pressing the talk switch while a
voice prompt is playing, will stop the
voice recognition prompt and
immediately play the start listening
tone.
 While in voice recognition mode,
pressing and holding the talk switch
for 1 or more seconds cancels voice
recognition mode.
2 After a beep sounds, say the
desired command or select the
desired command.
■Displaying the command list
screen
1 Say “More commands” or select
“More commands” on the speech
command main menu screen.
2 Say the desired command or select
the desired command.
3 Say the desired command or select
the desired command.
NOTICE
●Do not touch and put a sharp object to the microphone.It may cause failure.
Speech command system opera-
tion