remote start lexus LC500 2018 Navigation Manual

2
-$@-$I@/BWJ@0.&@ &&

TABLE OF CONTENTS
Introduction .......................................................6
Reading this manual ....................................... 8
1-1. Basic function
Display and operation switches .. 12
Remote Touch .................................... 14
Menu screen ....................................... 16
Status icon ........................................... 18
“Setup” screen .................................. 20
Information screen ........................... 21
1-2. Navigation operation
Operating the map screen .......... 22
Guiding the route ............................ 23
Registering home............................. 24
2-1. Basic information before opera-
tion
Initial screen ...................................... 28
How to use the Remote Touch.. 28
Operating the screen...................... 31
Using side display ........................... 33
Entering letters and numbers/list
screen operation .......................... 35
Linking multi-information display
and navigation system ................ 38
2-2. Network settings
Registering/Connecting
Bluetooth® device ...................... 39
Setting Bluetooth® details ........... 43
Connecting to internet via Wi-Fi®
................................................................ 51
2-3. Other settings
General settings............................... 56
Voice settings.................................... 60
Vehicle settings ................................. 61
3-1. Basic operation
Quick reference............................... 64
Map screen operation ................... 69
Map screen information ................ 71
Traffic messages............................... 76
3-2. Destination search
Search operation ............................. 79
3-3. Route guidance
Starting route guidance ................ 90
Route guidance ................................ 93
Editing route ...................................... 95
3-4. Favourite destinations
Registering an entry...................... 101
Editing the entry information ... 103
3-5. Setup
Map settings.................................... 106
Traffic message settings.............. 110
Route preferences settings ........ 113
3-6. Tips for the navigation system
GPS (Global Positioning System)
............................................................. 115
Navigation database updates.... 117
4-1. Basic operation
Quick reference............................ 120
1Quick guide
2Basic function
3Navigation system
4Audio/visual system

28
-$@-$I@/BWJ@0.&@ &&

2-1. Basic information before operation
2-1.Basic information before operation
After a few seconds, the “CAUTION”
screen will be displayed.
Waiting about 5 seconds or selecting
“Continue” switches to the last dis-
played screen.
When system response is extremely
slow, the system can be restarted.
1 Press and hold the “PWR•VOL”
knob for 3 seconds or more.
1 Use the touchpad of the Remote
Touch to select the desired button
on the screen.
2 The buttons on the screen can be
selected by either depressing or
double tapping on the touchpad.
Once a button has been selected,
the screen will change.
 When the pointer moves close to a
button, it will automatically snap to
Initial screen
When the engine switch <power
switch> is turned to ACCESSORY
or IGNITION ON mode <ON
mode>, the initial screen will be dis-
played and the system will begin
operating.
Caution screen
WARNING
●When the vehicle is stopped with the engine running <the hybrid system
operating>, always apply the parking brake for safety.
Restarting the system
How to use the Remote
Touch
This system can be operated by the
Remote Touch when the engine
switch <power switch> is in ACCES-
SORY or IGNITION ON mode
<ON mode>.
Touchpad operation

64
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
3-1.Basic operation
Destination menu screen is displayed by following operation:
 Press the “MAP” button on the Remote Touch
 Press the “MENU” button on the Remote Touch and then select “Destination”
on the menu screen.
 Select on the map screen.
A short while later after the above methods, the display automatically switches to
normal map screen.
Select to search for a destination by contact, favourite, recent destination,
street address, and POI. ( P.79)
Select to set a destination from favourites. The top 4 favourite destinations
(home, work, and 2 favourites) are disp layed as quick access buttons. Any
favourite in the list can be used to start route guidance directly. ( P.83)
Select to search for a destination from a list of the last destinations. ( P.83)
Select to display the other search me thod (Address, POI, phonebook of con-
nected Bluetooth® device and geo-coodinates).
Quick reference
Destination menu screen
A
B
C
D

69
3
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
Navigation system
1Press the “MAP” button on the
Remote Touch.
2 Select “Continue”.
 After about a few seconds, the cau-
tion screen automatically switches
to the map screen.
When starting the navigation system,
the current position is displayed first.
This screen displays the current vehicle
position and a map of the surrounding
area.
1 A short while later after the select-
ing “MAP” button on the Remote
Touch, the display automatically
switches to map screen.
 The current vehicle position mark
appears in the centre of the map
screen.
●While driving, the current vehicle posi- tion mark is fixed on the screen and the map moves.
●The current position is automatically set as the vehicle receives signals from the
GPS (Global Positioning System). If the current position is not correct, it is auto-matically corrected after the vehicle
receives signals from the GPS.
●After battery disconnection, or on a new vehicle, the current position may not be correct. As soon as the system receives
signals from the GPS, the correct current position is displayed.
Use the scroll feature to move the
desired point to the center of the
screen for looking at a point on the
map screen that is different from the
current position.
1 Select the desired point on the map
screen.
 Move the desired point on the cen-
ter of the map screen.
 After the screen is scrolled, it is pos-
sible to do the drag or flick opera-
tion on the touchpad.
Map screen operation
Displaying map screen
Current vehicle position display
Screen scroll operation

81
3
-$@-$I@/BWJ@0.&@ &&

3-2. Destination search
Navigation system
■If the result is a street address
Select to display the Street View.
Select to enter the house number.
Select to enter the intersection.
Select to register the entry in the
favourites list.
Select to display the starting route
guidance screen. ( P.90)
4 favourite destinations (home, work,
and any 2 favourites) are displayed as
quick access buttons and directly start
the route guidance when selected.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Favourites”.
3 Select desired quick access desti-
nations.
 To use this function, it is necessary to
register destinations. ( P.101)
 Automatic navigation is available for
the 4 favourite destinations. When
the favourite has an address
assigned, is turned on. ( P.81)
The feature automatically proposes
guidances to the registered destination
when you start the vehicle during the
registered day/time slot.
Registered a day/time slot
1 Select “OK” to start route guid-
ance.
 If “Cancel” is selected, last active
screen will display.
Searching from quick access
destinations
A
B
C
D
E
Automatic navigation for com-
muting
When the destination is not set

85
3
-$@-$I@/BWJ@0.&@ &&

3-2. Destination search
Navigation system
6Select “Town” or “Code” to enter
the town name or postal code.
7 Select “No.” or “Intersection” to
enter a house number or intersec-
tion name.
 It is not possible to enter a house
number and intersection at the
same time.
8 Select “Calculate”.
●If a unique street name is entered (only 1
in the country), then “Calculate” can also be selected. If “Calculate” is selected when only “Town” or “Code” has been
entered, a route search starts with the centre of the town entered as the destina-
tion.
●When is selected, entered data other
than “Country” will be deleted.
Search for a destination from POI
database in the system.
When the system is connected to the
internet, a web search is available.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Other”.
3 Select “POI”.
4 Enter the POI name and select
“Search”.
Select to change the searching
area. ( P.86)
Select to narrow down the POI cat-
egory. ( P.87)
Select to display the list of previous
search word. ( P.87)
5 Check that the search results are
displayed. Select the desired POI.
Select to display a full list view. The
distance to the POIs can be
checked.
 When button on the Remote
Touch is pressed, the search method
buttons are displayed.
POIs can be searched using web
search.
• For detailed setting about online search:
 P.229
Searching by POIs
A
B
C
A

88
-$@-$I@/BWJ@0.&@ &&

3-2. Destination search
button is greyed out.
Select to display the starting route
guidance screen. ( P.90)
3 Select .
■Pictures
Selecting the Pictures button displays
up to 6 pictures as thumbnails in the
screen. Selecting a thumbnail will
enlarge the picture.
1 Select .
2 Select the desired thumbnail.
 The previous/next buttons are only
shown if there is more than one pic-
ture available. If a picture can’t be
shown as enlarged, a message
“Images are not available.” will be
displayed.
Before using this function, it is neces-
sary to connect a Bluetooth® phone.
If a contact does not have address
information stored, the entry will be
dimmed.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Other”.
3 Select “Phonebook”.
4 Select the desired entry.
 Select to display the details
screen. ( P.80)
Geo coordinates can be entered in
DMS format (Degrees°, Minutes’, Sec-
onds”) and Decimal. Only coordinate
values that can potentially exist are
able to be entered. Impossible coordi-
nate values and their relevant screen
buttons will be dimmed.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Other”.
3 Select “Geo coordinates”.
4 Select “Degrees” or “Decimal”.
5 Enter the latitude and longitude.
6 Select “OK”.
Searching by phonebook
C
Searching by coordinates

101
3
-$@-$I@/BWJ@0.&@ &&

3-4. Favourite destinations
Navigation system
3-4.Favourite destinations
1Press the “MAP” button on the
Remote Touch.
2 Select “Favourites”.
3 Check that the favourites list is dis-
played.
 The 4 top favourites (home, work,
and any 2 favourites) are displayed
as quick access buttons.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Favourites”.
3 Select “Add new...” box.
4 Select the desired method to
search the desired location.
5 Enter the entry name and then
select “OK”.
6 Check that the entry is registered in
the favourites list.
4 favourite destinations (home, work,
and any 2 favourites) are displayed as
quick access buttons and directly start
the route guidance. Automatic naviga-
tion is available to the 4 favourite desti-
nations.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Favourites”.
Registering an entry
Favourite points and routes on the
map can be registered in the favou-
rites list. Up to 200 entries can be
registered.
Displaying favourites list
Creating a new entry
Registering a quick access desti-
nations

149
4
-$@-$I@/BWJ@0.&@ &&

4-5. Setup
Audio/visual system
1Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Audio” on the sub menu.
4 Select “FM”.
5 Select the desired button to be set.
Select “Broadcaster” or “Alphabet-
ical” to set the listing order of the
station list.
The tuner will automatically seek a
station that regularly broadcasts
traffic information and the station
broadcasts when the traffic infor-
mation program starts.
A station providing good reception
is automatically selected if current
reception worsens.
Select to switch to a broadcasting
station within the same local pro-
gram network.
Select on/off to set the FM Radio
text feature.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Audio” on the sub menu.
4 Select “DAB”.
5 Select the desired button to be set.
Select on/off to set L-band in the
tune range. When “Off” is selected,
the physical channel range for tun-
ing operations is limited to Band III,
excluding for preset operations.
When “On” is selected, the physical
channel range fo r tuning opera-
tions includes Band III and L-band.
The tuner will automatically seek a
station that regularly broadcasts
traffic information and the station
broadcasts when the traffic infor-
mation program starts.
A station providing good reception
is automatically selected if current
reception worsens.
Select on/off to set the DAB text
feature.
FM radio settings
A
B
C
D
E
DAB settings
A
B
C
D

150
-$@-$I@/BWJ@0.&@ &&

4-5. Setup
1Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Audio” on the sub menu.
4 Select “DVD”.
5 Select the items to be set.
Select to change the audio lan-
guage. ( P.150)
Select to change the subtitle lan-
guage. ( P.150)
Select to change the language of
the DVD video menu. ( P.150)
Select to set the angle mark on/off.
Select to set the parental control
level. ( P.151)
Select to set the auto start playback
on/off.
Discs that are inserted while the
vehicle is in motion will automati-
cally start playing. Certain discs
may not play.
Select to set a dynamic range.
( P.151)
Select to initialize all menus.
1 Select “Audio language”.
2 Select the desired language to be
heard.
 If the desired language to be heard
cannot be found on this screen,
select “Other” and enter a language
code. ( P.151)
1 Select “Subtitle language”.
2 Select the desired language to be
read.
 If the desired language to be read
cannot be found on this screen,
select “Other” and enter a language
code. ( P.151)
1 Select “Menu language”.
2 Select the desired language to be
read.
 If the desired language to be read
cannot be found on this screen,
select “Other” and enter a language
code. ( P.151)
DVD settings
A
B
C
D
E
F
Audio language
Subtitle language
Menu language
G
H