lexus LC500C 2021 / LEXUS 2021 LC500 CONVERTIBLE QUICK GUIDE (OM11518U) Workshop Manual

Page 51 of 106

51
LC500_QG_OM11518U_(U)
The tire pressure detected by the tire pres-
sure warning system can be displayed on
the multi-information display.
The illustration used is intended as an exam-
ple, and may differ from the image that is
actually displayed on the multi-information
display.
Tire Pressure Warning System
Your vehicle is equipped with a tire pressure warning system that uses tire pressure warn-
ing valves and transmitters to detect low tire inflation pressure before serious problems
arise.
The tire inflation pressure display function

Page 52 of 106

52
LC500_QG_OM11518U_(U)
1Turn the engine switch to ON.
2Press or of the meter control switches and select .
3Press or of the meter control switch es and select “Vehicle Settings”, then
press “OK”.
4Press or of the meter control switch es and select “TPWS SET”, then press
“OK”.
5Press or of the meter co ntrol switches and select “Set tire pressure”. Then
press and hold “OK” until the tire pressure warning light starts blinking.
A message is displayed on the multi-infor-
mation display. Also, “--” is displayed for
inflation pressure of each tire on the multi-
information display while the tire pressure
warning system determines the position.
6Drive the vehicle at approximately 25 mph (40 km/h) or more for approximately 10 to
30 minutes.
When initialization is comple te, the inflation pressure of each tire will be displayed on
the multi-information display.
Initializing the tire pressure warning system

Page 53 of 106

53
LC500_QG_OM11518U_(U)
Exterior
Soft top roof
Luggage cover
 Interior
Multi-information display (P.32)
Displays opening/closing status of the
soft top roof.
Roof switch
Soft top roof
The soft top roof can be opened or closed by the switch operation.
System components
A
B
A
B

Page 54 of 106

54
LC500_QG_OM11518U_(U)
1Open the palm rest.
2Operate the switch.
1Open
2Close
The side windows and rear quarter win-
dows operate linked to opening or closing
the soft top roof.
Opening/closing status of the soft top roof
will be displayed on the multi-information
display.
When the operation of the soft top roof has completed, the bar will turn to gray and the
buzzer will sound.
To close the side windows and rear quarte r windows, press the power window switch.
Opening or closing the soft top roof

Page 55 of 106

55
LC500_QG_OM11518U_(U)
“MAP” button
Press to display the current location.
“MENU” button
Press to display the menu screen.
Back button
Press to display the previous screen.
Touchpad
Operate to select/confirm a button on the screen.
Operate to scroll list screen s and enlarge/shrink the map.
Sub function button
When is displayed on the screen, a function screen assigned to the screen can be
displayed.
Remote Touch
The navigation/multimedia system is primarily operated by the Remote Touch.
Remote Touch is the name for the device th at includes the “MAP” button, “MENU” but-
ton, back button, touchpad and sub function button.
Names and operations of each part
A
B
C
D
E

Page 56 of 106

56
LC500_QG_OM11518U_(U)
Press the “MENU” button on the Remote Touch to display the menu screen.
Menu screen
SwitchFunction
Select to display the destination screen. (P.61)
Select to display the audio control screen. ( P.71, 72, 73)
Select to display the hand s-free control screen. (P.65)
Select to display the “Apps” screen.*1, 2
/
/When an Apple CarPlay/Android Auto connection is established and this
button displays “Apple CarPlay”/”An droid Auto”, select to display the
home screen of Apple CarPlay/Android Auto.
*1, 2
Select to display the information screen. ( P.59)
Select to display the setup screen.*2, 3
Select to display the air co nditioning control screen. ( P.76)

Page 57 of 106

57
LC500_QG_OM11518U_(U)
*1: This function is not made available in some countries or areas.
*2: Refer to the “NAVIGATION SYSTEM OWNER’S MANUAL”.
*3: Refer to the “OWNER’S MANUAL”.
Different information can be displayed on the le ft and right of the screen. For example, air
conditioning system screen can be displayed and operated while the fuel consumption
information screen is being displayed. The large screen on the left of the display is called the
main display, and the small screen to the right is called the side display.
The following functions can be displayed
and operated on the side display.Navigation system ( P.61)
Audio ( P.70, 71, 72, 73)
Vehicle information ( P.60)
Air conditioning system ( P.78)
Show/hide the side display
Split-screen display
Side display
A
B
C
D
E

Page 58 of 106

58
LC500_QG_OM11518U_(U)
Select the desired point on the map screen.
Move the desired point on the center of the
map screen.Cursor mark
Distance from the current position to
the cursor mark
Select to register as a memory point.
Select to set as a destination.
Press the “MAP” button on the Remote Touch to return to the current position.
Destinations can be added, reordered or delete d, and conditions for the route to the desti-
nation can be changed.
1Select “Edit Route”.
2Select the desired item.
Select to add destinations.
Select to delete destinations.
Select to reorder destinations.
Select to set route preferences.
Map scroll operation
A
B
C
D
Editing route
A
B
C
D
Some functions are unavailable while the vehi cle is in motion. Refer to the “NAVIGATION
SYSTEM OWNER’S MANUAL”.

Page 59 of 106

59
LC500_QG_OM11518U_(U)
Press the “MENU” button on the Remote Touch, then select on the menu screen, and
then select “Trip Information” or “History”.
■Trip information
If a screen other than “Trip Information” is displayed, select “Trip Information”.
Resetting the consumption data
Fuel consumption in the past 15 min-
utes
Current fuel consumption
Average vehicle speed since the
engine was started.
Elapsed time since the engine was started.
Cruising range
■History
If a screen other than “History” is displayed, select “History”. Best recorded fuel consumption
Latest fuel consumption
Previous fuel consumption record
Resetting the history data
Updating the latest fuel consumption
data
Fuel Consumption Information
Fuel consumption information can be displayed on the Center Display.
The consumption screen can be displayed on the side display. For details, refer to the
“OWNER’S MANUAL”.
Consumption
A
B
C
D
E
F
A
B
C
D
E

Page 60 of 106

60
LC500_QG_OM11518U_(U)
Vehicle information can be displayed on the side display.
Select or to display the desired screen.
●Trip information (type A/type B)
● History
Side display

Page:   < prev 1-10 ... 11-20 21-30 31-40 41-50 51-60 61-70 71-80 81-90 91-100 ... 110 next >