display lexus LS400 1995 Gauges, Meters and Service Reminder Indicators / 1995 LS400: AIR CONDITIONING AND AUDIO

AIR CONDITIONING AND AUDIO
93
1 Driver side temperature control button
2 Front windshield button
3 Driver side temperature display (in degrees
Fahrenheit or Centigrade)
4 Fan speed display
5 Air intake control button
6 Air flow display
7 Air conditioning on−off button
8 Passenger side temperature control button
9 Passenger side temperature display (in degrees
Fahrenheit or Centigrade)
10 Separate / dual control button
11 Air flow control button
12 Fan speed control button
13 Automatic control button
14 OFF button

AIR CONDITIONING AND AUDIO
97 If quick heating or cooling is desired −
Push the “TEMP” button on either side and hold it until “MAX.
HOT” or “MAX. COLD” appears on the display.
If manual fan speed control is desired −

1
Fan speed at low 2
Fan speed at high
The fan speed can be set to your desired speed by pushing the
appropriate side of fan speed control button. The higher the fan
speed is, the more air is delivered. Pushing the “OFF” button
turns off the fan.
To remove exterior windshield frost, use the high speed
setting.If manual switching of air intake is desired −
The air intake control button is used to switch the air intake
between the OUTSIDE AIR mode and RECIRCULATED AIR
mode.
With the button in the OUTSIDE AIR mode, the OUTSIDE AIR
mode indicator light will come on and the system will take fresh
outside air into the vehicle.
If quick circulation of cooled air is desired, push the air intake
control button for RECIRCULATED AIR. The
RECIRCULATED AIR mode indicator light will come on.
For normal use, it is best to keep the air intake control button
set to OUTSIDE AIR mode. If recirculated air is used during
heating, the windows will fog up more easily.

AIR CONDITIONING AND AUDIO
103
1
Turning the system on and adjusting volume
(See page 106 for details.)
2
Stopping and ejecting a cassette tape
(See page 111 for details.)
3
Function buttons
1 − 6: Station selector buttons
(See page 110 for details.)
SCAN: Scan tuning
(See page 111 for details.)
P. SCAN: Preset scan tuning
(See page 111 for details.)
4
Display of functions in TAPE mode

:
Side change
(See page 112 for details.)
:DOLBY NR
(See page 112 for details.)
:Rewinding
(See page 112 for details.)


:Fast forwarding
(See page 112 for details.)
RPT:Automatic repeat
(See page 113 for details.)
SKIP: Automatic skip of blank portions of tape
(See page 113 for details.)
SCAN: Scan selection
(See page 114 for details.)
4
Display of functions in CD mode
:Disc selection
(See page 119 for details.)
:Reversing
(See page 120 for details.)


:Fast forwarding
(See page 120 for details.)
RPT:Automatic repeat
(See page 121 for details.)
RAND: Random access
(See page 121 for details.)
SCAN: Scan selection
(See page 119 for details.)
5
Mode selectors
(See page 106 for details.)
6
Cassette tape slot
(See page 111 for details.)
7
Tone and balance knobs
(See page 107 for details.)
8
Radio mode:Frequency tuning
(See page 109 or 110 for details.)
TAPE mode:Direct access to a desired program
(See page 114 for details.)
CD mode:Direct access to a desired program
(See page 120 for details.)

AIR CONDITIONING AND AUDIO
105
1
Turning the system on and adjusting volume
(See page 106 for details.)
2
Stopping and ejecting a cassette tape
(See page 111 for details.)
3
Function buttons
1 − 6: Station selector buttons
(See page 110 for details.)
SCAN: Scan tuning
(See page 111 for details.)
P. SCAN: Preset scan tuning
(See page 111 for details.)
4
Display of functions in TAPE mode

:
Side change
(See page 113 for details.)
:DOLBY NR
(See page 112 for details.)
|: Direct access to a desired program
(See page 115 for details.)


|: Direct access to a desired program
(See page 115 for details.)
RPT:Automatic repeat
(See page 113 for details.)
SKIP: Automatic skip of blank portions of tape
(See page 113 for details.)
SCAN: Scan selection
(See page 114 for details.)
4
Display of functions in CD mode
:Disc selection
(See page 119 for details.)
:Reversing
(See page 120 for details.)


:Fast forwarding
(See page 120 for details.)
RPT:Automatic repeat
(See page 121 for details.)
RAND: Random access
(See page 121 for details.)
SCAN: Scan selection
(See page 119 for details.)
5
Mode selectors
(See page 106 for details.)
6
Cassette tape slot
(See page 111 for details.)
7
Tone and balance knobs
(See page 107 for details.)
8
Radio mode:Frequency tuning
(See page 109 or 110 for details.)
TAPE mode:Rewinding or fast forwarding
(See page 113 for details.)
CD mode:Direct access to a desired program
(See page 120 for details.)

AIR CONDITIONING AND AUDIO
107
In the “TAPE” or “CD” mode, the applicable functions are
shown in the lowest part of the display. Push the switch
just below to turn on each function.
(b) Tone and balance
How good an audio program sounds to you is largely
determined by the mix of the treble, mid−range, and bass
levels. In fact, different kinds of music and vocal programs
usually sound better with different mixes of treble, mid−range,
and bass.
A good balance of the left and right stereo channels and of the
front and rear sound levels is also important.
Keep in mind that if you are listening to a stereo recording or
broadcast, changing the right / left balance will increase the
volume of one group of sounds while deceasing the volume of
another.“BASS” knob: Use this knob to adjust low−pitched tones.
“MID” knob: Use this knob to adjust mid−pitched tones.
“TREBLE” knob: Use this knob to adjust high−pitched tones.
“BALANCE” knob: Use this knob to adjust the sound balance
between The right and left speakers.
“FADER” knob: Use this knob to adjust the sound balance
between the front and rear speakers.

AIR CONDITIONING AND AUDIO
108(c) Your radio antenna
The antenna automatically extends when the radio and ignition
are turned on and retracts when either is turned off.
CAUTION
Before extending the antenna, confirm that no one is close
enough to get injured.
NOTICE
To prevent damage to the antenna, make sure it is
retracted before driving your vehicle through an
automatic car wash.
(d) Your cassette player
When you insert a cassette, the exposed tape should be to the
right.
NOTICE
Do not oil any part of the cassette player, and do not
insert anything except a cassette tape into the slot.
(e) Your automatic changer
If your Lexus is equipped with an automatic changer, it can play
selected discs or continuously play all the discs set in the
magazine.
When you set discs into the magazine, make sure they face the
correct way. If not, the player will display “Err” and the disc
number.
NOTICE
Never try to disassemble or oil any part of the compact
disc player. Do not insert anything except a compact
disc into the magazine.
The player is intended for use with 12 cm (4.7 in.) discs only.
Using 8 cm (3.2 in.) discs requires the use of an adaptor, which
could cause tracking errors or interfere with disc ejection.

AIR CONDITIONING AND AUDIO
109
Radio operation
(a) Listening to the radio
Push these buttons to choose either an AM or FM station.
“AM”, “FM1” or “FM2” appears on the display.
Push this button on the upper side to step up the station
band or on the lower side to step down.
Your radio automatically changes to stereo reception when a
stereo broadcast is received. “ST” appears on the display. If
the signal becomes weak, the radio reduces the amount of
channel separation to prevent the weak signal from creating
noise. If the signal becomes extremely weak, the radio
switches from stereo to mono reception. In this case, “ST”
disappears from the display.

AIR CONDITIONING AND AUDIO
11 0(b) Presetting a station
1. Tune in the desired station.
2. Push one of the station selector buttons (1−6) and hold
it until a beep is heard. This sets the station to the button
and the button number (1−6) appears on the display.
Each button can store one AM station and two FM stations.
To change the preset station to a different one, follow the same
procedure.
The preset station memory is cancelled when the power
source is interrupted by battery disconnection or a blown fuse.(c) Selecting a station
Your Lexus has an electronic tuning radio (ETR). Tune in the
desired station using one of the following methods.
Preset tuning: Push the button (1−6) for the station you want.
The button number (1−6) and station frequency appear on the
display.
Manual tuning: Push the “TUNE SEEK” button for no longer
than 0.5 seconds. Each time you push the button, the radio will
step up or down to another frequency.
Seek tuning: Push the “TUNE SEEK” button and hold it until
you hear a beep. The radio will begin seeking up or down for
a station of the nearest frequency and will stop on reception.
Each time you push the button, the stations will be searched
out one after another.

AIR CONDITIONING AND AUDIO
111
To scan all the frequencies: Push the “SCAN” button.
“SCAN” appears on the display. The radio will find the next
station up the band, stay there for a few seconds, and then
scan again. To select a station, push the “SCAN” button a
second time.
To scan the preset stations: Push the “P.SCAN” button.
“P.SCAN” appears on the display. The radio will tune in the next
preset station up the band, stay there for a few seconds, and
then move to the next preset station. To select a station, push
the “P.SCAN” button a second time.
Cassette tape player operation
(a) Playing a cassette tape
When you insert a cassette tape, the exposed tape should
be to the right.
The player will automatically start when you insert a cassette
tape. At this time, “TAPE” appears on the display.
If a metal or chrome equivalent cassette tape is put in the
cassette player, the player will automatically adapt to it and
“METAL” appears on the display.
To stop or eject the cassette tape, push the “EJECT” button.
Auto−reverse feature: After the cassette player reaches the
end of a tape, it automatically reverses and begins to play the
other side, regardless of whether the cassette was playing or
forwarding.

AIR CONDITIONING AND AUDIO
11 2
If a cassette is already in the slot, push the “TAPE” button.
Dolby
 Noise Reduction* feature: If you are listening to a
tape that was recorded with Dolby B or C Noise Reduction,
posh too “Dolby” button until the appropriate symbol appears
on the display.
The Dolby B NR mode reduces noise for high−pitched tones.
The Dolby C NR mode is also effective for middle tones. For
best sound reproduction, select the same NR mode that was
used to record the tape.
To play a tape recorded without Dolby NR, push the button until
the symbol disappears from the display.
* Dobly noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation. “DOLBY” and the double−D
symbol
are trademarks of Dolby Laboratories Licensing
Corporation.
(b) Manual program selection

Type A
“Program” button: Push the “

” button to select the
other side of a cassette tape. The display indicates which side
is currently selected ( indicates top side,  indicates bottom
side).
“Rewind” button: Push the “” button to rewind a tape.
“REW” appears on the display.
To stop rewinding, push the same button or “TAPE” button.
“Fast forward” button: Push the “

” button to fast forward
a cassette tape. “FF” appears on the display.
To stop fast forwarding, push the same button or “TAPE”
button.