ECO mode lexus LS400 1996 Audio System / 1996 LS400: AUDIO SYSTEM

AIR CONDITIONING AND AUDIO
107
In the ªTAPEº or ªCDº mode, the applicable functions
are shown in the lowest part of the display. Push the
switch just below to turn on each function.
(b) Tone and balance
How good an audio program sounds to you is largely
determined by the mix of the treble, mid±range, and bass
levels. In fact, different kinds of music and vocal programs
usually sound better with different mixes of treble,
mid±range, and bass.
A good balance of the left and right stereo channels and of
the front and rear sound levels is also important.
Keep in mind that if you are listening to a stereo recording or
broadcast, changing the right/left balance will increase the
volume of one group of sounds while decreasing the volume
of another.ªBASSº knob: Use this knob to adjust low±pitched tones.
ªMIDº knob: Use this knob to adjust mid±pitched tones.
ªTREBLEº knob: Use this knob to adjust high±pitched
tones.
ªBALANCEº knob: Use this knob to adjust the sound
balance between the right and left speakers.
ªFADERº knob: Use this knob to adjust the sound balance
between the front and rear speakers.

AIR CONDITIONING AND AUDIO
11 2
If a cassette is already in the slot, push the ªTAPEº
button.
Dolby Noise Reduction* feature: If you are listening to
a tape that was recorded with Dolby* B or C Noise
Reduction, push the button by the double±D symbol until the
appropriate symbol appears on the display.
The Dolby B NR mode reduces tape noise by about 10 dB.
The Dolby C NR mode reduces tape noise by another 10 dB
or about 20 dB total. For best sound reproduction, select the
same NR mode that was used to record the tape.
To play a tape recorded without Dolby NR, push the button
until the symbol disappears from the display.
* Dolby noise reduction manufactured under license from Dolby Laboratories
Licensing Corporation. ªDOLBYº and the double±D symbolare
trademarks of Dolby Laboratories Licensing Corporation.
(b) Manual program selection
ªProgramº button: Push the ªX
º button to select the
other side of a cassette tape. The display indicates which
side is currently selected (
 indicates top side,  indicates
bottom side).
ªRewindº button: Push the ª
º button to rewind a tape.
ªREWº appears on the display.
To stop rewinding, push the same button or ªTAPEº button.
ªFast forwardº button: Push the ª


º button to fast
forward a cassette tape. ªFFº appears on the display.
To stop fast forwarding, push the same button or ªTAPEº
button.