LEXUS NX300h 2022 Owners Manual

Page 141 of 804

Page 142 of 804

Adjustingthepositionofthesteeringwheelandmirrors
Adjustingthepositionofthesteeringwheelhorizontally/vertically(Manualtype)
WARNINGDo not adjust the steering wheel while driving.
1 Hold the steering wheel and push the lever
down.
2 Adjust to the ideal position by moving the
steering wheel horizontally and vertically.
After adjustment, pull the lever up to secure the
steering wheel.
INFORMATION

Page 143 of 804

Adjustingthepositionofthesteeringwheelhorizontally/vertically(Powertype)INFORMATION

Page 144 of 804

Adjust the inside rear view mirror vertically by
grasping and moving it.
DigitalRear-veiwmirroreffortandcaution *
The Digital Rear-view Mirror is a system that uses the camera on the rear of the
vehicle and displays its image on the display of the Digital Rear-view Mirror.
The Digital Rear-view Mirror can be changed between optical mirror mode and digital mirror mode by operating the lever.
The Digital Rear-view Mirror allows the driver to see the rear view despite obstruc-
tions, such as the head restraints or luggage, ensuring rear visibility. Also, the rear seats are not displayed and privacy of the passengers is enhanced.
WARNINGObserve the following precautions. Failure to do so may result in death or serious injury.

Page 145 of 804

DMenu buttonPress to display the icon display area andselect the item you want to adjust.E
Lever
Operate to change between digital mirror
mode and optical mirror mode.
RelatedLinks
Adjusting the Digital Rear-view Mirror(P. 144)
ChangingmodesoftheDigitalRear-viewMirror
Operate the lever to change between digital mirror mode and optical mirror
mode.
1Digital mirror mode
Displays an image of the area behind the
vehicle.
[
@ will illuminate in this mode.
2 Optical mirror mode
Turns off the display of the Digital Rearview
Mirror allows it to be used as an optical mirror.
Digitalmirrormodeoperatingcondition
The power switch is turned to ON.
When the power switch is changed from ON to OFF or ACC, the image will
disappear after several seconds.
Precautionsaboutdigitalmirrormode
If it is difficult to see the displayed image due to light reflected off the Digital
Rear-view Mirror, the camera being dirty or covered with water droplets, dust, etc.,
or if lights of a vehicle behind your vehicle or the displayed image are bothering
you, change to optical mirror mode.
When it is raining, if the image is unclear due to water on the rear window, operate the rear wiper.

Page 146 of 804

Page 147 of 804

The icons will disappear if a button is not operated for approximately 5 seconds or
more.IconsSettingsSelect to adjust the brightness of the dis-
play.Select to adjust the area displayed up/
down.Select to adjust the area displayed to the
left/right.Select to adjust the angle of the displayed
image.Select to zoom in/out the displayed im-
age.Select to enable/disable the automatic
anti-glare function. *2
Responding to the brightness of the
headlights of vehicles behind, the reflect-
ed light is automatically adjusted.
The automatic anti-glare function is en- abled each time the power switch is
changed to ON.Select to display HomeLink

Page 148 of 804

Page 149 of 804

INFORMATION

Page 150 of 804

SymptomLikely causeSolution
The image is dif-
ficult to see.
The mirror surface is dirty.Wipe the mirror surface gently, us-
ing a soft dry cloth.
Sunlight or headlights are shin-
ing directly into the Digital Rear-
view Mirror.
Change to optical mirror mode.
(If the light is coming through the
moon roof or panoramic moon roof, close the sunshade or electronic
sunshade.)

Page:   < prev 1-10 ... 101-110 111-120 121-130 131-140 141-150 151-160 161-170 171-180 181-190 ... 810 next >