LEXUS NX300h 2022 Owners Manual

Page 171 of 804

Page 172 of 804

NOTICE

Page 173 of 804

Startingoff
1 With the brake pedal depressed, shift the shift position to D.
Check that the shift position indicator shows D.WARNINGAlways keep your foot on the brake pedal while stopped with the "READY" indicator is illuminated. This prevents the vehicle from creeping.
2 If the parking brake is set, release the parking brake.
3 Gradually release the brake pedal and gently depress the accelerator pedal to
accelerate the vehicle.
RelatedLinks
Manual applying/releasing of the parking brake (manual mode)(P. 181)
Startingoffonanincline
1 Firmly depress the brake pedal and shift the shift position to D.
The hill-start assist control will be activated.
WARNINGAlways keep your foot on the brake pedal while stopped with the "READY" indicator is illuminated. This prevents the vehicle from creeping.
2 Set the parking brake.
3 Release the brake pedal and gently depress the accelerator pedal to acceler-
ate the vehicle.
4 Release the parking brake.
RelatedLinks
Manual applying/releasing of the parking brake (manual mode)(P. 181)
2-2.Drivingprocedures1712
Driving the vehicle

Page 174 of 804

Operationswhenturningleftorrightorchanginglanes
By operating the turn signal lever, the intent of the driver can be shown as follows.INFORMATION

Page 175 of 804

Changingtheshiftrange
The shift range can be changed by operating the paddle shift switches. Changing
the shift range enables the level of engine braking force to be selected.
SelectingshiftrangesintheDposition
To drive using temporary shift range selection, operate the [ -@ paddle shift switch
with the shift position in D.
The shift range can then be selected by operating the [ -@ and [ +@ paddle shift
switches.

1Upshift
2 Downshift
The selected shift range, from D1 to D6, will be displayed on the multi-information
display.
To return to normal D position driving, hold the [ +@ paddle shift switch for a certain
amount of time.

Page 176 of 804

SelectingshiftrangesintheSposition
To enter S mode, change the shift position to S.
The shift range can be selected by operating the [ -@ and [ +@ paddle shift switches.

1Upshift
2 Downshift
The selected shift range, from S1 to S6, will be displayed on the multi-information
display.
The initial shift range in S position is set automatically to S4 or S5 according to
vehicle speed.

Page 177 of 804

Parkingthevehicle
Whenparkingthevehicle
Precautionsforwhenthevehicleisstoppedorparked
WARNING

Page 178 of 804

Exhaustgasprecautions
Harmful substance to the human body is contained in exhaust gases if inhaled.
WARNINGExhaust gases contain harmful carbon monoxide (CO), which is colorless and odorless.Observe the following precautions.
Failure to do so may cause exhaust gases to enter the vehicle. This may cause light-head-
edness, possibly leading to an accident, death or a serious health hazard.

Page 179 of 804

Stopping
1 Depress the brake pedal.WARNING

Page 180 of 804

RelatedLinks
Shift position display and how to change the shift position(P. 166)2-3.Parkingthevehicle178

Page:   < prev 1-10 ... 131-140 141-150 151-160 161-170 171-180 181-190 191-200 201-210 211-220 ... 810 next >