LEXUS NX300h 2022 Owners Manual

Automaticallychangingbetweenthelowbeamheadlightsandhighbeamheadlights
AHS(AdaptiveHigh-beamSystem) *
The Adaptive High-beam System uses a front camera located on the upper
portion of the windshield to detect the brightness of the lights of vehicles ahead,streetlights, etc., and automatically controls the light distribution of the headlights.
WARNING

UsingtheAdaptiveHigh-beamSystem
1Press the Adaptive High-beam System
switch.
2 Turn the headlight switch to the [AUTO@ or
[
@ position.
When the headlight switch lever is in the low
beam position, the AHS system will be enabled
and the AHS indicator will illuminate.
INFORMATION

RWhen headlights or tail lights of vehicles ahead are turned off, dirty, changing color,
or not aimed properly
R When the headlights are repeatedly changing between the high beams and low
beams.
R When use of the high beams is inappropriate or when the high beams may be
flashing or dazzling pedestrians or other drivers.
R When the vehicle is used in an area in which vehicles travel on the opposite side
of the road of the country for which the vehicle was designed, for example using a vehicle designed for right-hand traffic in a left-hand traffic area, or vice versa
R When it is necessary to disable the system:
W P.341
R Situations in which the sensors may not operate properly:
W P.346

INFORMATION

RThe distance between the vehicle and a vehicle ahead
R When a vehicle ahead only has lights illuminated on one side
R When a vehicle ahead is a two-wheeled vehicle
R The condition of the road (gradient, curve, condition of the road surface, etc.)
R The number of passengers and amount of luggage

Turningthehighbeamson/offmanually

Drivingwhenthesunorheadlightsofothervehiclesarebright
Usingthesunvisors

1To set the visor in the forward position, flip it
down.
2 To set the visor in the side position, flip
down, unhook, and swing it to the side.
3 To use the side extender, place the visor in
the side position, then slide it backward.3-2.Drivingwhenthesunorheadlightsofothervehiclesarebright2073
Driving according to the conditions

Insiderearviewmirroranti-glarefunction(vehicleswithautoanti-glareinsiderearviewmirror)
Responding to the level of brightness of the headlights of vehicles behind, the
reflected light is automatically reduced.
This function turns on each time the power switch is changed to ON.INFORMATIONWhen the anti-glare function of the inside rear view mirror is set to automatic mode, the outside rear view mirrors will activate in conjunction with the anti-glare inside rear viewmirror to reduce reflected light.
Push the switch to turn the automatic anti-glare
function on/off
When the automatic anti-glare function is on, the indi-
cator
will be illuminated.
Pressing the switch again will turn the function off.
(The indicator
will also turn off.)
INFORMATION