LEXUS NX300h 2022 Owners Manual

DigitalRearviewMirroranti-glarefunction(opticalmirrormode)
The automatic anti-glare function in the optical mirror mode can be enabled/disa-
bled.
The automatic anti-glare function is enabled each time the power switch is changed to ON.
1 Press the menu button.
The setting display will be displayed.
2 Press the menu button repeatedly and select
.
The setting display will be displayed.
3 Press [
@ or [ @ to enable (ON)/disable (OFF) the automatic
anti-glare function.
The icons will disappear if a button is not operated for approximately 5 seconds or
more.
3-2.Drivingwhenthesunorheadlightsofothervehiclesarebright2093
Driving according to the conditions

Drivingintherain
Precautionsfordrivingintherain
Observe the following precautions when driving in the rain.

Ensuringvisibilityintherain
Operate the wiper lever to change the operation of wipers between manual and
automatic operation or to operate the washers.
Usingthefrontwipers
WARNINGVehicles with rain-sensing windshield wipers:
Take care that your fingers, etc. do not become caught in the windshield wipers. The windshield wipers may operate unexpectedly in AUTO mode if the sensor is touched
or the windshield is subject to vibration.NOTICEObserve the following precautions when using the front wipers.

As an optical sensor is used, it may not operate properly when sunlight from the rising
or setting of the sun intermittently strikes the windshield, or if bugs, etc. are present on
the windshield.

INFORMATION

Push the lever.
The rear wiper and washer will operate.
The washer will automatically operate and clean
the camera for Lexus parking assist monitor.
The rear wiper will automatically operate a cou-
ple of times after the rear washer operates.NOTICEIf washer fluid does not spray, do not operate the switch continuously as doing so may damage the rear washer fluid pump.INFORMATION