display MAZDA MODEL 2 2019 (in English) Owner's Manual

Page 263 of 759

xThe Forward Sensing Camera (FSC)
recognises a speed limit sign as a sign
targeted for your vehicle and the
vehicle passes it.
xThe speed limit sign stored in the
navigation system is read.
xInclement weather speed limit signs are
displayed when all of the following
conditions are met.
xThe vehicle speed is about 1 km/h (0.6
mph) or more.
xThe Forward Sensing Camera (FSC)
recognises an inclement weather
speed limit sign as a sign targeted for
your vehicle and the vehicle passes it.
xThe inclement weather speed limit
sign is lower than the currently
displayed speed limit sign.
xThe windscreen wipers are operated.
xIn the following cases, display of the
speed limit sign stops.
xThe Forward Sensing Camera (FSC)
recognises a new speed limit sign
which differs from the previous one
(displays the new speed limit sign).
Do not enter signs
xA do not enter sign is displayed when all
of the following conditions are met.
xThe vehicle speed is about 80 km/h
(50 mph) or slower.
xThe Forward Sensing Camera (FSC)
recognises a do not enter sign as a
sign targeted for your vehicle and the
vehicle passes it.
xA speed limit sign with an auxiliary
sign is not recognised.
xWhen the Forward Sensing Camera
(FSC) recognises the do not enter sign
and a certain period of time has elapsed
since the vehicle passed the sign, display
of the do not enter sign stops.
Stop sign
xA stop sign is displayed when all of the
following conditions are met:
xThe vehicle speed is about 30 km/h
(19 mph) or slower.
xThe Forward Sensing Camera (FSC)
recognises a stop sign as a sign
targeted for your vehicle.
xWhen a certain period of time has
elapsed since the stop sign was
displayed, display of the stop sign stops.
xA speed limit sign with an auxiliary sign
is not recognised.
:KHQ'ULYLQJ
L$&7,96(16(


Page 265 of 759

:DUQLQJDFWLYDWLRQWLPLQJ
x,IWKHYHKLFOHVSHHGH[FHHGVWKHVSHHGOLPLWVLJQGLVSOD\HGLQWKHGLVSOD\WKH
H[FHVVLYHVSHHGZDUQLQJLVDFWLYDWHG
x,IWKHYHKLFOHVSHHGH[FHHGVWKHVSHHGOLPLWVLJQGLVSOD\HGLQWKHGLVSOD\E\NPK
PSK WKHH[FHVVLYHVSHHGZDUQLQJLVDFWLYDWHG
x,IWKHYHKLFOHVSHHGH[FHHGVWKHVSHHGOLPLWVLJQGLVSOD\HGLQWKHGLVSOD\E\
NPK PSK WKHH[FHVVLYHVSHHGZDUQLQJLVDFWLYDWHG
NOTE
xIn the following cases, the excessive speed warning stops operating.
xThe vehicle speed is less than the speed of the displayed speed limit sign. (If the
activation timing for the excessive speed warning is changed in the personalisation
features, the excessive speed warning stops operating when the vehicle speed is less
than the changed vehicle speed.
xA speed limit sign indication has been updated and the vehicle speed is lower than the
updated indication.
xDisplay of the speed limit sign stops.
xThe warning indication is displayed at the same time the excessive speed warning sound
is activated if the vehicle speed exceeds the speed indicated on the speed limit sign.
Refer to Warning Sound is Activated on page 7-48.
xThe TSR can recognise a speed limit sign with an auxiliary sign and display it, but it
cannot determine the indication on the auxiliary sign (such as time restrictions, turning
restrictions, end of section). Therefore, the excessive speed warning is activated when the
vehicle speed exceeds the displayed speed limit sign even if the conditions indicated on
the auxiliary sign do not apply to the vehicle.
xIf the Forward Sensing Camera (FSC) incorrectly recognises the actual speed limit sign
at a lower speed, the excessive speed alarm is activated even if the vehicle is driven at the
legal speed.
:KHQ'ULYLQJ
L$&7,96(16(


Page 267 of 759

▼,QGLFDWLRQRQ'LVSOD\
7KH'566RSHUDWLRQVWDWXVLVLQGLFDWHGLQWKHDFWLYHGULYLQJGLVSOD\5HJDUGLQJ
PDOIXQFWLRQVFKHFNWKHYHKLFOHFRQGLWLRQVRUKDYHLWLQVSHFWHGE\DQH[SHUWUHSDLUHU ZH
UHFRPPHQGDQ$XWKRULVHG0D]GD5HSDLUHU DFFRUGLQJWRWKHFRQWHQWRIWKHGLVSOD\HG
PHVVDJH
5HIHUWR:DUQLQJ,QGLFDWRU/LJKWVRQSDJH
NOTE
xWhen the ignition is switched off, the operation status before the system was turned off is
maintained. For example, if the ignition is switched off with the DRSS operable, the
system will be operable when the ignition is switched ON the next time.
xThe DRSS can be turned on/off and the system's sensitivity can be changed.
Refer to Personalisation Features on page 9-15.

Vehicle ahead
display
'LVWDQFHEHWZHHQYHKLFOHVJXLGHOLQHV

'LVSOD\'LVWDQFHEHWZHHQYHKLFOHVJXLGH(
OLQHV
'XULQJWUDYHODWDERXWNPK
PSK 'LVWDQFHEHWZHHQYHKLFOHVJXLGH(
OLQHV
'XULQJWUDYHODWDERXWNPK
PSK
Illuminated in
amber
$ERXWP IW RUOHVV $ERXWP IW RUOHVV

 7KHGLVWDQFHEHWZHHQYHKLFOHVGLIIHUVGHSHQGLQJRQYHKLFOHVSHHG
:KHQ'ULYLQJ
L$&7,96(16(


Page 269 of 759

NOTE
xThe DAA operates when all of the following conditions are met.
xThe vehicle speed is about 65 to 140 km/h (40 to 86 mph).
xThe system detects white (yellow) lane lines.
xThe system has completed learning of the driver’s driving data.
xThe DAA does not operate under the following conditions.
xThe vehicle speed is less than about 65 km/h (40 mph).
xThe vehicle speed exceeds about 140 km/h (86 mph)
xThe vehicle is making a sharp turn.
xThe vehicle is changing lanes.
xThe system cannot detect white (yellow) lane lines.
xThe DAA may not operate normally under the following conditions.
xWhite (yellow) lane lines are less visible because of dirt or fading/patchiness.
xThe vehicle is jolted or swayed continuously by strong winds or rough roads.
xThe vehicle is driven aggressively.
xWhen making frequent lane changes.
xThe DAA detects driver fatigue and decreased attentiveness based on the driving data
when the vehicle is driven at about 65 to 140 km/h (40 to 86 mph) for about 20 minutes.
The driving data will be reset under the following conditions.
xThe vehicle is stopped for 15 minutes or longer.
xThe vehicle is driven at less than about 65 km/h (40 mph) for about 30 minutes.
xThe ignition is switched off.
xAfter the DAA has displayed the first message encouraging rest, it does not display the
next one until 45 minutes have passed.
▼'ULYHU$WWHQWLRQ$OHUW '$$
'LVSOD\ :KLWH
:KHQWKHV\VWHPGHWHFWVGULYHUIDWLJXHRU
GHFUHDVHGDWWHQWLYHQHVVLWDFWLYDWHVWKH
ZDUQLQJVRXQGDQGGLVSOD\VDQDOHUWLQWKH
DFWLYHGULYLQJGLVSOD\
▼▼&DQFHOOLQJ'ULYHU$WWHQWLRQ$OHUW
'$$
7KH'$$FDQEHVHWWRQRWDFWLYDWH
5HIHUWR3HUVRQDOLVDWLRQ)HDWXUHVRQSDJH

:KHQ'ULYLQJ
L$&7,96(16(


Page 276 of 759

xThe following are not detected as physical objects.
xVehicles approaching in the opposite direction
xPedestrians
xStationary objects (stopped vehicles, obstructions)
xIf a vehicle ahead is travelling at an extremely low speed, the system may not detect it
correctly.
xDuring headway control travel, do not set the system on two-wheeled vehicles such as
motorcycles and bicycles.
xDo not use the MRCC system under conditions in which the close proximity warnings are
frequently activated.
xDuring headway control travel, the system accelerates and decelerates your vehicle in
conjunction with the speed of the vehicle ahead. However, if it is necessary to accelerate
for a lane change or if the vehicle ahead brakes suddenly causing you to close in on the
vehicle rapidly, accelerate using the accelerator pedal or decelerate using the brake
pedal depending on the conditions.
xWhile the MRCC system is in use, it does not cancel even if the selector lever (automatic
transaxle)/shift lever (manual transaxle) is operated and any intended engine braking will
not occur. If deceleration is required, lower the vehicle speed setting or depress the brake
pedal.
xThe brake lights are illuminated while the MRCC automatic braking is operating,
however, they may not be illuminated while the vehicle is on a down slope at the set
vehicle speed or travelling at a constant speed and following a vehicle ahead.
xThe MRCC warning light (amber) illuminates when the system has a malfunction.
Refer to Warning Lights on page 4-39.
xThe headway control operation can be cancelled and the system can be switched to only
cruise control.
Refer to Cruise Control Function on page 4-143.
▼0D]GD5DGDU&UXLVH&RQWURO 05&& 'LVSOD\,QGLFDWLRQ
7KHVHWWLQJVWDWXVDQGRSHUDWLRQFRQGLWLRQVRIWKH05&&V\VWHPDUHLQGLFDWHGLQWKHDFWLYH
GULYLQJGLVSOD\
Vehicle ahead display
MRCC Distance
between vehicle
display
MRCC Set vehicle speed
:KHQ'ULYLQJ
L$&7,96(16(


Page 278 of 759

+RZWR6HWWKH6SHHG
 $GMXVWWKHYHKLFOHVSHHGWRWKHGHVLUHGVHWWLQJXVLQJWKHDFFHOHUDWRUSHGDO
 +HDGZD\FRQWUROEHJLQVZKHQWKH6(7
RU6(7VZLWFKLVSUHVVHG7KHVHWVSHHGDQG
WKHLQWHUYHKLFOHGLVWDQFHGLVSOD\ILOOHGZLWKZKLWHOLQHVDUHGLVSOD\HG7KH05&&VHW
LQGLFDWLRQ JUHHQ LVLQGLFDWHGVLPXOWDQHRXVO\
7UDYHOVWDWXV 'LVSOD\
'XULQJWUDYHODWFRQVWDQWVSHHG
'XULQJWUDYHOXQGHUKHDGZD\FRQWURO
NOTE
xIf a vehicle ahead is detected while travelling at a constant speed, the vehicle-ahead
indication is displayed and headway control is performed. Additionally, when a vehicle
ahead is no longer detected, the vehicle-ahead indication turns off and the system
switches back to travel at constant speed.
xHeadway control is not possible if the vehicle ahead is driving faster than the set speed.
Adjust the system to the desired vehicle speed using the accelerator pedal.
x(European models)
When switching to a passing lane and operating the direction indicator, the system
provides more acceleration automatically if it determines that more acceleration is
required. Drive while being careful of the road ahead because you could approach the
vehicle ahead too closely.
:KHQ'ULYLQJ
L$&7,96(16(


Page 280 of 759

&KDQJLQJWKH6HW9HKLFOH6SHHG
&KDQJLQJWKHVHWYHKLFOHVSHHGXVLQJWKH
6(7VZLWFK
3UHVVWKH6(7
VZLWFKWRDFFHOHUDWH
3UHVVWKH6(7
VZLWFKWRGHFHOHUDWH
7KHVHWYHKLFOHVSHHGFKDQJHVDVIROORZV
HDFKWLPHWKH6(7VZLWFKLVSUHVVHG
(XURSHDQ
PRGHOV([FHSW(XUR(
SHDQPRGHOV
6KRUWSUHVV NPK PSK NPK PSK
/RQJSUHVV NPK PSK
NOTE
For example, the set vehicle speed is
changed by pressing the SET switch four
times as follows:
(European models)
The vehicle speed accelerates or
decelerates by 4 km/h (4 mph).
(Except European models)
The vehicle speed accelerates or
decelerates by 20 km/h (20 mph).
7RDFFHOHUDWHXVLQJWKHDFFHOHUDWRU
SHGDO
'HSUHVVWKHDFFHOHUDWRUSHGDODQGSUHVV
DQGUHOHDVHWKH6(7
RU6(7VZLWFKDW
WKHGHVLUHGVSHHG,IDVZLWFKFDQQRWEH
RSHUDWHGWKHV\VWHPUHWXUQVWRWKHVHW
VSHHGZKHQ\RXUHOHDVH\RXUIRRWIURPWKH
DFFHOHUDWRUSHGDO
&$87,21
The warnings and brake control do not
operate while the accelerator pedal is
depressed.
NOTE
xWhen accelerating using the SET
switch while in headway control, the set
vehicle speed can be adjusted but
acceleration is not possible. If there is
no longer a vehicle ahead, acceleration
continues until reaching the set vehicle
speed. Check the set vehicle speed by
viewing the set vehicle speed display in
the active driving display.
xWhile depressing the accelerator pedal,
the colour of the MRCC indication
changes from green to white.
xThe minimum settable speed is 30 km/h
(19 mph). If the set vehicle speed
reaches 30 km/h (19 mph) using the
switch operation, constant speed travel
is maintained at about 30 km/h (19 mph)
even if the SET
switch is pressed. The
MRCC system is not cancelled.
7R'HDFWLYDWH
7KH05&&LVGHDFWLYDWHGZKHQWKH
&$1&(/VZLWFKLVSUHVVHGWZLFH
:KHQ'ULYLQJ
L$&7,96(16(


Page 282 of 759

▼6KLIWXS6KLIWGRZQ5HTXHVW'LVSOD\ 0DQXDO7UDQVD[OH
7KHVKLIWXSRUVKLIWGRZQUHTXHVWGLVSOD\LQWKHDFWLYHGULYLQJGLVSOD\PD\EHLQGLFDWHG
ZKLOHWKH05&&LVRSHUDWLQJ:KHQWKLVRFFXUVVKLIWJHDUVEHFDXVHWKHJHDUSRVLWLRQLVQRW
DSSURSULDWH
5HTXHVW 'LVSOD\
6KLIWXS
6KLIWGRZQ
NOTE
If the gears are not shifted up even though the shift-up request indication is displayed, load
will be applied to the engine and the MRCC system may be automatically cancelled or
engine damage could occur.
:KHQ'ULYLQJ
L$&7,96(16(


Page 290 of 759

xIf you take your hands off the steering wheel (not holding the steering wheel), the warning
sound is activated and an alert is indicated in the active driving display or the warning
light turns on in the instrument cluster.

With Active Driving Display Without Active Driving Display
If the steering wheel is held lightly, or depending on the road conditions, the system may
detect that you have released the steering wheel (not holding the steering wheel) even if
you are holding it, and display a message in the active driving display.
xThe timing at which the lane departure warning is activated and the steering wheel
operation assist is performed varies.
xThe following settings for the LAS&LDWS can be changed. Refer to Personalisation
Features on page 9-15.
xSteering operation assist operational/non-operational
xCancel sensitivity (likelihood of steering assist)
9HKLFOHODQHOLQHGLVSOD\
:KHQWKH/$6 /':6GHWHFWVZKLWH \HOORZ OLQHVRQERWKWKHOHIWDQGULJKWVLGHVDQG
EHFRPHVRSHUDWLRQDOWKHYHKLFOHODQHOLQHVDUHLQGLFDWHGLQWKHDFWLYHGULYLQJGLVSOD\RUWKH
/$6 /':6LQGLFDWRUOLJKWWXUQVRQLQWKHLQVWUXPHQWFOXVWHU
With Active Driving Display Without Active Driving Display
$XWRFDQFHO
,QWKHIROORZLQJFDVHVWKH/$6 /':6LVDXWRPDWLFDOO\FDQFHOOHGDQGWKHYHKLFOHODQH
OLQHV VWDQGE\ DUHLQGLFDWHGLQWKHDFWLYHGULYLQJGLVSOD\,QDGGLWLRQZKHQWKH
/$6 /':6EHFRPHVRSHUDWLRQDOWKHV\VWHPWXUQVEDFNRQDXWRPDWLFDOO\DQGWKHYHKLFOH
ODQHOLQHV RSHUDWLRQDO DUHLQGLFDWHGLQWKHDFWLYHGULYLQJGLVSOD\
x7KHWHPSHUDWXUHLQVLGHWKHFDPHUDLVKLJKRUORZ
x7KHZLQGVFUHHQDURXQGWKHFDPHUDLVIRJJ\
x7KHZLQGVFUHHQDURXQGWKHFDPHUDLVEORFNHGE\DQREVWUXFWLRQFDXVLQJSRRUIRUZDUG
YLVLELOLW\
:KHQ'ULYLQJ
L$&7,96(16(


Page 295 of 759

▼/DQH'HSDUWXUH:DUQLQJ
,IWKHV\VWHPGHWHUPLQHVWKDWWKHYHKLFOHPD\GHYLDWHIURPLWVODQHWKHODQHGHSDUWXUH
ZDUQLQJ EHHSVRXQGUXPEOHVRXQG

RUVWHHULQJZKHHOYLEUDWLRQ LVDFWLYDWHGDQGWKH
GLUHFWLRQLQZKLFKWKHV\VWHPGHWHUPLQHVWKDWWKHYHKLFOHPD\GHYLDWHLVLQGLFDWHGLQWKH
DFWLYHGULYLQJGLVSOD\
,IWKHV\VWHPGHWHUPLQHVWKDWWKHYHKLFOHPD\GHYLDWHIURPLWVODQHWKHFRORXURIWKHODQH
OLQHRQWKHVLGHEHLQJGHWHFWHGE\WKHV\VWHPFKDQJHVIURPZKLWHWRDPEHUDQGIODVKHV
Warning light (Flashes) Active Driving Display
NOTE
xIf you have set the lane departure warning sound to the beep sound/rumble sound*1
setting, the warning sound may not be heard depending on the surrounding noise
conditions.
xIf you have set the lane departure warning system to the steering wheel vibrations setting,
the vibration may not be felt depending on the road surface conditions.
xWhen the setting for the steering operation assist is changed to operational, the warnings
can be set to activate/not activate. (When the setting for the steering operation assist is
changed to non-operational, the warnings cannot be set to not activate.)
Refer to Setting Change (Personalisation Features) on page 9-15.
xThe LAS & LDWS can be changed to the following settings regardless of whether the
steering operation assist has been set to operational/non-operational. Always check the
setting status when driving the vehicle and make setting changes if necessary.
Refer to Setting Change (Personalisation Features) on page 9-15.
xSteering wheel vibration: Strong/weak
xWarning sound volume
xTypes of warnings (steering wheel vibration/beep sound/rumble sound*1)
*1 A rumble strip is a series of grooves in the road pavement surface positioned at specific
intervals, and when the vehicle passes over it a vibration and rumble sound is produced
which alerts the driver that the vehicle is departing from the lane.
:KHQ'ULYLQJ
L$&7,96(16(


Page:   < prev 1-10 11-20 21-30 31-40 41-50 51-60 61-70 ... 100 next >