jacking MAZDA MODEL 2 2019 Owners Manual (in English)

Page 644 of 759

▼5HPRYLQJD)ODW7\UH
:$ 5 1 , 1 *
When jacking-up a vehicle, always shift the
shift lever to 1st or R position (manual
transaxle vehicle) or shift the selector lever
to P position (automatic transaxle vehicle),
apply the parking brake, and place wheel
blocks in the position diagonally opposed
to the jack:
Changing a
flat tyre without using wheel
blocks is dangerous because the vehicle
may move and fall off the jack even with
the shift lever in 1st or R position, or the
selector lever is in P position, which could
result in an accident.
 ,I\RXUYHKLFOHLVHTXLSSHGZLWKD
ZKHHOFRYHUSU\RIIWKHZKHHOFRYHU
ZLWKWKHEHYHOOHGHQGRIWKHMDFNOHYHU

NOTE
Force the end of the jack lever firmly
between wheel and cover, or removal
will be difficult.
&$87,21
Align the notch on the wheel cover with
the valve stem when installing it.

Tyre valve Notch
Damage could occur during
installation if the wheel cover is not
properly aligned.
 /RRVHQWKHZKHHOQXWVE\WXUQLQJWKHP
DQWLFORFNZLVHRQHWXUQHDFKEXWGRQRW
UHPRYHDQ\ZKHHOQXWVXQWLOWKHW\UH
KDVEHHQUDLVHGRIIWKHJURXQG

 3ODFHWKHMDFNRQWKHJURXQG
,I7URXEOH$ULVHV
)ODW7\UH


Page 645 of 759

 7XUQWKHMDFNVFUHZLQWKHGLUHFWLRQ
VKRZQLQWKHILJXUHDQGDGMXVWWKHMDFN
KHDGVRWKDWLWLVFORVHWRWKHMDFNXS
SRVLWLRQ

Jack head
 3ODFHWKHMDFNXQGHUWKHMDFNXS
SRVLWLRQFORVHVWWRWKHW\UHEHLQJ
FKDQJHGZLWKWKHMDFNKHDGVTXDUHO\
XQGHUWKHMDFNXSSRLQW

Jacking position
 &RQWLQXHUDLVLQJWKHMDFNKHDG
JUDGXDOO\E\URWDWLQJWKHVFUHZZLWK
\RXUKDQGXQWLOWKHMDFNKHDGLV
LQVHUWHGLQWRWKHMDFNXSSRVLWLRQ

Tyre blocks
Jacking position
:$ 5 1 , 1 *
Use only the front and rear jacking
positions recommended in this manual:
Attempting to jack the vehicle in
positions other than those
recommended in this manual is
dangerous. The vehicle could slip off
the jack and seriously injure or even kill
someone. Use only the front and rear
jacking positions recommended in this
manual.
Do not jack up the vehicle in a position
other than the designated jack-up
position or place any objects on or
under the jack:
Jacking up the vehicle in a position
other than the designated jack-up
position or placing objects on or under
the jack is dangerous as it could deform
the vehicle body or the vehicle could fall
off the jack resulting in an accident.
,I7URXEOH$ULVHV
)ODW7\UH


Page 646 of 759

Use only the jack provided with your
Mazda:
Using a jack that is not designed for
your Mazda is dangerous. The vehicle
could slip off the jack and seriously
injure someone.
Never place objects under the jack:
Jacking the vehicle with an object
under the jack is dangerous. The jack
could slip and someone could be
seriously injured by the jack or the
falling vehicle.
NOTE
When raising the jack head into the
jacking position and aligning the
groove in the jack head with the rail
under the vehicle body, the top of the
jack head contacts the vehicle's
underbody without the rail contacting
the bottom of the groove.
 ,QVHUWWKHMDFNOHYHUDQGDWWDFKWKH
ZKHHOEUDFHWRW\UHMDFN

 7XUQWKHMDFNKDQGOHFORFNZLVHDQG
UDLVHWKHYHKLFOHKLJKHQRXJKVRWKDW
WKHVSDUHW\UHFDQEHLQVWDOOHG%HIRUH
UHPRYLQJWKHZKHHOQXWVPDNHVXUH
\RXU0D]GDLVILUPO\LQSRVLWLRQDQG
WKDWLWFDQQRWVOLSRUPRYH

:$51,1*
Do not jack up the vehicle higher than
is necessary:
Jacking up the vehicle higher than is
necessary is dangerous as it could
destabilize the vehicle resulting in an
accident.
Do not start the engine or shake the
vehicle while it is jacked up:
Starting the engine or shaking the
vehicle while it is jacked up is
dangerous as it could cause the vehicle
to fall off the jack resulting in an
accident.
Never go under the vehicle while it is
jacked up:
Going under the vehicle while it is
jacked up is dangerous as it could result
in death or serious injury if the vehicle
were to fall off the jack.
,I7URXEOH$ULVHV
)ODW7\UH