navigation MAZDA MODEL 3 HATCHBACK 2015 Navigation Manual (in English)

19
3 On-road navigation
You can set up your route in different ways:
If you need a route for immediate navigation, you can select the destination and start navigating
to it right away (normal navigation).
You can plan routes with multiple destinations. Select the fi rst destination. Then select a
second destination and add it to your route to create a multi-point rout\
e. You can add as many
destinations to your route as you like.
3.1 Selecting the destination of a route
The navigation system offers you several ways of choosing your destination:
• Enter a full address or a part of an address (page 20).
• Select a POI (point of interest) from a database as your destination (\
page 29).
• Searches the destination from the map (page 40).
• Use a previously saved Favorite destination (page 42).
• Select a location from the History of previously used destinations (pag\
e 43).
• Enter the coordinate of the destination (page 44).
Note! There are other convenient functions.
/"7"76#&JOEC







20
3.1.1 Entering an address or a part of the address
If you know at least a part of the address, it is the quickest way to se\
lect the destination of the
route.
Using the same screen, you can fi nd an address by entering:
• Destination address
• The center of a city
• An intersection
• The midpoint of a street
Note! If an address or part of a facility name is input, a search candidate li\
st
including the input characters is displayed. The greater the number of
characters input the more the list is re
fi ned.
3.1.1.1 Entering an address
To enter an address as the destination, do as follows:
1. Select
after selecting on the MAP screen.
2. Select
.
3. By default, the navigation system proposes the country and city where yo\
u are. If needed, select
, enter the fi rst few letters of the country name on the keyboard,
and select one country from the list of results.
/"7"76#&JOEC







22
6. Enter the house number:
a. Select
.
b. Enter the house number on the keyboard. (To enter letters, select
.)
c. Select
to fi nish entering the address. (If the entered house number cannot be
found, the midpoint of the street is selected as the destination.)
7. The selected location is shown on the map.
The system transitions to the next screen by selecting , or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
8. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
/"7"76#&JOEC







24
5. Instead of entering the house number, select
. The midpoint of the street is
selected as the destination.
6. The selected location is shown on the map.
The system transitions to the next screen by selecting , or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
7. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
/"7"76#&JOEC







26
6. The selected location is shown on the map.
The system transitions to the next screen by selecting
, or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
7. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
/"7"76#&JOEC







28
6. The selected location is shown on the map.
The system transitions to the next screen by selecting
, or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
7. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
/"7"76#&JOEC







29
3.1.2 Selecting the destination from the POI (point of interest)
You can select your destination from the POI (point of interest) includ\
ed with the navigation
system.
Using the same screen, you can fi nd a POI (point of interest) in different ways:
• You can quickly fi nd a nearby POI (point of interest) by its name using the Quick search\

feature.
• You can fi nd frequently searched types of POI (point of interest) with only a fe\
w screen
selects using the Preset search feature.
• You can search for a POI (point of interest) by its category.
• You can search for a POI (point of interest) by its name.
3.1.2.1 Quick search for a POI (point of interest)
If the name for a POI (point of interest) is input, a search candidate\
list is displayed. One
destination among the candidates can be selected. • Along the recommended route if it exists or
• Around your current location if there is no destination given.
Start the Quick search function:
1. Select
after selecting on the MAP screen.
2. Select
.
3. Select .
/"7"76#&JOEC







31
7. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
/"7"76#&JOEC







32
3.1.2.2 Searching for Help nearby
The Preset search feature lets you quickly fi nd the most frequently selected types of Places.
1. Select
after selecting on the MAP screen.
Or, select after selecting as an alternative method.
2. In the Navigation menu, select
.
3. Preset search categories appear, all for searching around the current position (or around the last known position if the current position is not available)\
:
4. Select any of the quick search buttons to get an instant list of Places.\

5. The selected location is shown on the map. The system transitions to the next screen by selecting , or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
/"7"76#&JOEC







33
6. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
3.1.2.3 Searching for a POI (point of interest) by category
You can search for Places of Interest by their categories and subcategori\
es.
1. Select
after selecting on the MAP screen.
2. Select
.
3. Select
.
4. Select the area around which the Place should be searched for:
• Select
to search around the current position or if it is not available,
around the last know position. (The result list will be ordered by the \
distance
from this position.)
• Select
to search along the active route, and not around a given
point. This is useful when you search for a later stopover that results in a
minimal detour only, such as searching for upcoming gasoline stations or
restaurants. (The result list will be ordered by the length of the nece\
ssary
detour.)
• Select
to search for a place around the destination
of the active route. (The result list will be ordered by the distance f\
rom the
destination.)
• Select
to search for a place within a selected city. (The result list will be
ordered by the distance from the center of the selected city.)

/"7"76#&JOEC