navigation MAZDA MODEL 3 HATCHBACK 2015 Navigation Manual (in English)

35
10. The selected location is shown on the map.
The system transitions to the next screen by selecting
, or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.

Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
11. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.

/"7"76#&JOEC







38
11. The selected location is shown on the map.
The system transitions to the next screen by selecting
, or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
12. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
/"7"76#&JOEC







40
6. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
3.1.4 Selecting a map location as the destination
1. Touch anywhere on the map.
2. Drag the cursor and release it at the desired point.
3. Select .
/"7"76#&JOEC







41
4. The selected location is shown on the map.
The system transitions to the next screen by selecting
, or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
5. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
/"7"76#&JOEC







42
3.1.5 Selecting the destination from your Favorites
1. Select after selecting on the MAP screen.
2. In the Navigation menu, select
.
When is selected, the screen transfers to the Favorites screen. Select your \
registered favorite.
3. The selected location is shown on the map.
The system transitions to the next screen by selecting , or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
4. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
/"7"76#&JOEC







43
3.1.6 Selecting a recent destination from the History
1. Select after selecting on the MAP screen.
2. In the Navigation menu, select
.
3. The list of recent destinations appears. Smart History promotes three de\
stinations to the fi rst page based on your previous routes (most likely destinations). The rest of the
destinations are ordered by time they were last selected. If necessary, scroll the list to
see earlier destinations.

4. Select a destination from the list.
5. The selected location is shown on the map.
The system transitions to the next screen by selecting
, or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
/"7"76#&JOEC







44
6. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
3.1.7 Entering the coordinate of the destination
You can also select a destination by entering its coordinate as follows:
1. Select
after selecting on the MAP screen.
2. In the Navigation menu, select
.
3. Input map coordinate value of and .
4. When fi nished, select .

5. Select .
/"7"76#&JOEC







45
6. The selected location is shown on the map.
The system transitions to the next screen by selecting
, or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
7. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
/"7"76#&JOEC







46
3.2 Checking route parameters and accessing route related functions
You can check different parameters of the route recommended by the navigation system.1. Select
after selecting on the MAP screen.
2. The following pieces of information are displayed:
• The name and/or address of the destination.
• The total time of the route.
• The total length of the route.
• The route planning method (e.g. Fast).

3. You have the following options on this screen (for detailed instructions\
on how to use them, see the next chapter):
• Select
to edit the route.
• Select
to display the entire route on the map.
• Select
to bypass a part of the route.
• Select
to delete the active route.
Note! There are other convenient functions.
/"7"76#&JOEC







47
3.3 Modifying the route
When navigation is already started, there are several ways to modify the\
active route. The
following sections show some of those options.
3.3.1 Selecting a new destination when already having a route: New Route, Waypoint or Final Destination
If you already have a recommended route and you select a new destination\
as described in the
above sections, the application will ask you whether to start a new rout\
e, add a new waypoint
(intermediate destination) to the route or append the newly selected d\
estination at the end of
the current route.
• Select to plan a new route to the newly selected location. The previous
destination and waypoint(s) are deleted.
• Select
to add the newly selected location as an intermediate destination to yo\
ur
route. The other destinations of the route remain intact. Note: the new waypoin\
t is placed
among destinations to keep the route optimal. To decide where a waypoint to appear, use
the Edit Route feature.
• Select
to append the newly selected destination at the end of the route.
The other destinations of the route remain intact. The previous fi nal destination is now the
last waypoint.
/"7"76#&JOEC