change time MAZDA MODEL 3 HATCHBACK 2016 (in English) Service Manual

7–35
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
Warning Sound is
Activated
Lights-On Reminder
The lights-on reminder is operable when
the time setting *1 of the auto headlight off
function is off.
If lights are on and the ignition is switched
to ACC or the ignition is switched off, a
continuous beep sound will be heard when
the driver's door is opened.

*1 If the light switch is left on, the auto
headlight off function automatically
turns off the lights about 30 seconds
after switching the ignition off. The
time setting can be changed.
Refer to Personalization Features on
page 9-12 .

N O T E
 


y When the ignition is switched to ACC,
the “Ignition Not Switched Off (STOP)
Warning Beep” (page 7-36 ) overrides
the lights-on reminder.
 


y A personalized function is available to
change the sound volume for the lights-
on reminder.
  Refer to Personalization Features on
page 9-12 .

Air Bag/Front Seat Belt
Pretensioner System Warning
Beep
If there is a problem with the air bag/seat
belt pretensioner systems and the warning
light illumination, a warning beep sound
will be heard for about 5 seconds every
minute.

The air bag and seat belt pretensioner
system warning beep sound will continue
to be heard for approximately 35
minutes. Have your vehicle inspected at
an Authorized Mazda Dealer as soon as
possible.
WARNING
Do not drive the vehicle with the air
bag/seat belt pretensioner system
warning beep sounding:
Driving the vehicle with the air bag/
seat belt pretensioner system warning
beep sounding is dangerous. In a
collision, the air bags and the seat belt
pretensioner system will not deploy
and this could result in death or serious
injury. Contact an Authorized Mazda
Dealer to have the vehicle inspected as
soon as possible.

.B[EB@'"&"(@&EJUJPOJOEC


.B[EB@'"&"(@&EJUJPOJOEC










7–38
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.
Blind Spot Monitoring (BSM)
System Warning Beep *
D r i v i n g f o r w a r d
The warning beep operates when the turn
signal lever is operated to the side where
the Blind Spot Monitoring (BSM) warning
light is illuminated.
N O T E
A personalized function is available to
change the Blind Spot Monitoring (BSM)
warning beep sound volume.
Refer to Personalization Features on page
9-12 .

Reversing
If a moving object such as a vehicle or
two-wheeled vehicle approaches on the
left or right from behind your vehicle, the
Blind Spot Monitoring (BSM) warning
sound is activated.
Mazda Radar Cruise Control
(MRCC) System Warnings *
The Mazda Radar Cruise Control (MRCC)
system warnings notify the driver of
system malfunctions and cautions on use
when required.
Check based on the beep sound.

Cautions What to check
The beep sounds 1 time
while the Mazda Radar
Cruise Control (MRCC)
is operating The vehicle speed is
slower than 25 km/h (16
mph) and the Mazda
Radar Cruise Control
(MRCC) system has
been canceled.
The beep sounds
continuously while
driving The distance between
your vehicle and the
vehicle ahead is too
close. Verify the safety
of the surrounding area
and reduce vehicle
speed.
When the Mazda
Radar Cruise Control
(MRCC) is operating,
the beep sounds and the
Mazda Radar Cruise
Control (MRCC)
warning light (amber)
in the instrument cluster
À ashes. A malfunction in
the system may be
indicated. Have your
vehicle inspected at
an Authorized Mazda
Dealer.

Collision warning *
If there is the possibility of a collision
with a vehicle ahead, the beep sounds
continuously and a warning is indicated in
the display.
Power Steering Warning Buzzer
If the power steering system has
a malfunction, the power steering
malfunction light turns on or À ashes and
the buzzer operates at the same time.
Refer to Warning/Indicator Lights on page
4-20 .
.B[EB@'"&"(@&EJUJPOJOEC


.B[EB@'"&"(@&EJUJPOJOEC










8–45
Customer Information and Reporting Safety Defects
Declaration of Conformity

N O T E
During printing time of this user manual the approvals listed above are granted.
WARNING
Change or modifi cations not expressively approved by the party responsible for
compliance could void the use's authority to operate the equipment.

HomeLink Wireless Control System
CAUTION
HomeLink has been tested and complies with FCC and Industry Canada rules. Changes or
modifi cations not expressly approved by the party responsible for compliance could void
the user's authority to operate the device.

N O T E
FCC ID: NZLMOBHL4
CANADA:4112A-MOBHL4
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1- This device may not cause harmful interference, and
2- This device must accept any interference received, including interference that may cause
undesired operation.

.B[EB@'"&"(@&EJUJPOJOEC


.B[EB@'"&"(@&EJUJPOJOEC










9–14
Speci¿ cations
Personalization Features
Item Feature Factory
Setting Available
Settings Settings change method

Vehicle Power door
lock
Refer to Auto
Lock/Unlock
Function on
page 3-16 . Changes the auto
lock/unlock function
setting for all the
doors according to
the vehicle speed,
the vehicle power
supply condition,
and the selector lever
position. Lock: When
Driving
Unlock:
IGN Off Lock: Out
of Park
Unlock: In
Park/
Lock:
Shifting
Out of
Park/
Lock:
When
Driving
Unlock:
IGN Off/
Lock:
When
Driving/
O f f

Refer to
Settings
on page
5-55 .
Refer to Auto
Lock/Unlock
Function on
page 3-16 .

Keyless entry
system
Refer to
Keyless Entry
System on
page 3-3 . The method for
unlocking the doors
using the transmitter
can be changed. Driver's:
Once, All
Doors:
Twice All Doors:
Once/
Driver's:
Once, All
Doors:
Twice

Refer to
Settings
on page
5-55 .
Refer to
Transmitter
on page
3-4 .

The time required for
the doors to relock
automatically after
unlocking with the
transmitter can be
changed. 60 seconds 90 seconds/
60 seconds/
30 seconds

Refer to
Settings
on page
5-55 . —


.B[EB@'"&"(@&EJUJPOJOEC


.B[EB@'"&"(@&EJUJPOJOEC










9–15
Speci¿ cations
Personalization Features
Item Feature Factory
Setting Available
Settings Settings change method

Vehicle Advanced
keyless entry
system
Refer to
Advanced
Keyless Entry
System on
page 3-9 . The volume of the
answer-back beep
during advanced
keyless entry system
operation can be
changed. Medium High/
Medium/
L o w /
O f f

Refer to
Settings
on page
5-55 .

Refer to
Locking,
Unlocking
with Request
Switch (With
the advanced
keyless
function) on
page 3-13 .

The function to
automatically lock
the doors when
leaving the vehicle
while carrying the
key can be changed. Off On/Off

Refer to
Settings
on page
5-55 . —


The method for
unlocking the doors
using the request
switch/transmitter
can be changed. Driver's:
Once, All
Doors:
Twice All Doors:
Once/
Driver's:
Once, All
Doors:
Twice

Refer to
Settings
on page
5-55 .

Refer to
Locking,
Unlocking
with Request
Switch (With
the advanced
keyless
function) on
page 3-13 .
Refer to
Transmitter
on page
3-4 .

The time required
for the doors to
relock automatically
after unlocking with
the request switch/
transmitter can be
changed. 60 seconds 90 seconds/
60 seconds/
30 seconds

Refer to
Settings
on page
5-55 . —


Illumination
entry
Refer to
Illuminated
Entry System
on page
5-136 . The time required for
the interior lamp to
turn off automatically
can be changed
(prevents battery
depletion when a
door is open/ajar). 30 minutes 60 minutes/
30 minutes/
10 minutes

Refer to
Settings
on page
5-55 . —


The time required for
the interior lamp to
turn off automatically
after all doors
are closed can be
changed. 15 seconds 60 seconds/
30 seconds/
15 seconds/
7.5 seconds

Refer to
Settings
on page
5-55 . —


.B[EB@'"&"(@&EJUJPOJOEC


.B[EB@'"&"(@&EJUJPOJOEC










9–16
Speci¿ cations
Personalization Features
Item Feature Factory
Setting Available
Settings Settings change method

Vehicle Auto-wiper
control
Refer to
Windshield
Wipers and
Washer on
page 4-47 . The auto-wiper
control function can
be changed. On On/Off
*4

Refer to
Settings
on page
5-55 . —


Daytime
running lights
Refer to
Daytime
Running
Lights on page
4-45 . The function of the
daytime running
lights can be
changed. On On/
O f f — —


Auto headlight
off
*5
Refer to
Headlights on
page 4-40 . The time required
for headlights to turn
off after ignition is
switched off can be
changed. 30 seconds 120
seconds/
90 seconds/
60 seconds/
30 seconds/
O f f
*6

Refer to
Settings
on page
5-55 . —


Auto-light
control
Refer to
Headlights on
page 4-40 . The headlight
illumination on/
off timing based
on surrounding
lightness/darkness
can be changed. Medium High/
Med. High/
Medium/
Med. Low/
L o w

Refer to
Settings
on page
5-55 . —


High Beam
Control
System (HBC)
Refer to High
Beam Control
System (HBC)
on page 4-
77 . The High Beam
Control System
(HBC) function can
be changed.
*1 On On/Off

Refer to
Settings
on page
5-55 . —


Lights-on
reminder
*7
Refer to
Lights-On
Reminder on
page 7-35 . The volume of the
lights-on reminder
warning alarm can be
changed. Off High/Low/
Off
Refer to
Settings
on page
5-55 . —


Turn indicator
Refer to
Turn and
Lane-Change
Signals on
page 4-46 . The turn indicator
beep volume level
can be changed. High High/Low

Refer to
Settings
on page
5-55 . —


.B[EB@'"&"(@&EJUJPOJOEC


.B[EB@'"&"(@&EJUJPOJOEC










9–17
Speci¿ cations
Personalization Features
Item Feature Factory
Setting Available
Settings Settings change method

Vehicle Three-À ash
turn signal
Refer to Three-
Flash Turn
Signal on page
4-47 . The three-time À ash
function can be
changed. On On/Off

Refer to
Settings
on page
5-55 . —


System Distance unit The distance unit can
be changed. mi or km mi/km

Refer to
Settings
on page
5-55 . —


Language The display language
can be changed.
*8 English English/
F r e n c h /
Spanish

Refer to
Settings
on page
5-55 . —


Temperature
unit The temperature unit
can be changed. °F or °C °F/°C

Refer to
Settings
on page
5-55 . —


Fuel
Economy
Monitor
Refer
to Fuel
Economy
Monitor
on page
4-69 . Ending display Setting can be
changed so that the
ending display of
the Fuel Economy
Monitor is displayed. Off On/Off

Refer
to Fuel
Economy
Monitor
on page
4-69 . —


Fuel economy
resetting
procedure Setting can be
changed so that the
fuel economy reset is
linked with the trip
meter reset. Off On/Off

Refer
to Fuel
Economy
Monitor
on page
4-69 . —


.B[EB@'"&"(@&EJUJPOJOEC


.B[EB@'"&"(@&EJUJPOJOEC










9–18
Speci¿ cations
Personalization Features
Item Feature Factory
Setting Available
Settings Settings change method

Active
driving
display
Refer to
Active
Driving
Display
on page
4-18 . Turn-by-Turn
(TBT) Setting can be
changed so that
the Turn-by-Turn
(TBT) of the Active
driving display is not
displayed. On On/Off

Refer to
Active
driving
display
on page
4-18 . —


*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends
that these systems remain On.
*2 For vehicles with an audio system other than the on-screen function type, the warning sound cannot be changed.
The warning sound is only a beep.
*3 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The
volume of the warning beep during Rear Cross Traf¿ c Alert (RCTA) operation cannot be changed.
*4 If the auto-wiper control is set to Off, the wiper lever
position is set to intermittent operation.
*5 If the setting is changed to Off, the following operation is performed according to the headlight switch position:
y A t position: Headlights turn off immediately after the ignition is switched off.
y At any position other than : Headlights do not turn off after the ignition is switched off. *6 When set to Off, the lights-on reminder is operable.
*7 The setting of the lights-on reminder can be changed with the time setting of auto headlight off function set to
Off. Refer to Lights-On Reminder on page 7-35 .
*8 Available only in display from the center display.



.B[EB@'"&"(@&EJUJPOJOEC


.B[EB@'"&"(@&EJUJPOJOEC