stop start MAZDA MODEL 6 2009 Navigation Manual (in English)
Page 16 of 124
16
RoutingAddress 
Book
Getting started
Navigation Set Up
l
You can alter the map display conditions, the route guidance conditions and show the 
system information.
nStop your vehicle before the following operations. Do not change the settings and destination locations while driving. Minimize the time 
spent viewing the monitor screen and listening to the voice guidance while driving. 
Operating the system will distract the driver from looking ahead of the vehicle and may 
cause an accident. 
Always stop the vehicle in a safe location and put the parking brake on before operating 
the system.
Before Stepsselect
Warning
MENU
Open
[NAVIGATION SETUP] (   page 17)
 (   page 19)
 (   page 20)
 (   page 21)
 (   page 22)
 (   page 24)
 ) 9 C 2 % : - C ) 2  F S S O   4 E K I      8 L Y V W H E ]   % T V M P                 4 1 
Page 28 of 124
28
RoutingAddress 
Book
Getting started
Screen change
nDo not keep your eyes fixed on the monitor screen or operate the system 
while driving
Do not change the settings and destination locations while driving. Minimize the time 
spent viewing the monitor screen and listening to the voice guidance while driving. 
Operating the system will distract the driver from looking ahead of the vehicle and may 
cause an accident. Always stop the vehicle in a safe location and use the parking brake 
before operating the system.
Map
orientation
Map scale
Warning
1
Select ,  on-
screen button.lNorth Up: Geographic north is up.
lHead Up: The direction you are 
heading is up.
1
Select or  on-screen 
button.
lThe map can be displayed in 
14 steps with scales from 
 to  . l
ZOOM OUT
lZOOM IN
(more detail.)
<Scale bar>
Imperial 
display1/32 mi
 (mile) 1/4 mi
(mile) 2 mi
(mile) 16 mi
(mile) 128 mi
(mile)
Metric 
display50 m 500 m 4 km 32 km 256 km
 ) 9 C 2 % : - C ) 2  F S S O   4 E K I      8 L Y V W H E ]   % T V M P                 4 1 
Page 31 of 124
31
Before 
UseGetting
started
Routing
lFor Character Entry, please refer to page 39.
lDo not keep your eyes fixed on the monitor screen or operate the system while driving.Do not change the settings and destination locations while driving. Minimize the time spent 
viewing the monitor screen and listening to the voice guidance while driving. Operating the system 
will distract the driver from looking ahead of the vehicle and may cause an accident. Always stop 
the vehicle in a safe location before operating the system.
lRoute searches with the navigation system can include roads that you cannot drive on and roads that you 
are prohibited from driving on due to traffic regulations. Please comply with the traffic regulations.
Warnings
Select the desired Search Area
 : ALABAMA
 : ARIZONA
 : ARKANSAS
 : CALIFORNIA
 : COLORADO
 : CONNECTICUT
 : DELAWARE
 : FLORIDA
 : GEORGIA
 : IDAHO
 : ILLINOIS
 : INDIANA
 : IOWA
 : KANSAS
 : KENTUCKY
 : LOUISIANA
 : MAINE
 : MARYLAND
 : 
MASSACHUSETTS : MICHIGAN
 : MINNESOTA
 : MISSISSIPPI
 : MISSOURI  : MONTANA
 : NEBRASKA
 : NEVADA
 : NEW HAMPSHIRE : NEW JERSEY
 : NEW MEXICO
 : NEW YORK
 : 
NORTH CAROLINA : NORTH DAKOTA
 : OHIO
 : OKLAHOMA
 : OREGON
 : PENNSYLVANIA
 : RHODE ISLAND
 : 
SOUTH CAROLINA : SOUTH DAKOTA
 : TENNESSEE
 : TEXAS
 : UTAH
 : VERMONT
 : VIRGINIA
 : WASHINGTON
 : WEST VIRGINIA : WISCONSIN
 : WYOMING
 : 
WASHINGTON, D.C. : ALBERTA
 : ONTARIO
 : QUEBEC
 : 
SASKATCHEWAN : NEWFOUNDLAND
AND LABRADOR
 : NEW BRUNSWICK : NOVA SCOTIA
 : NUNAVUT
 : 
BRITISH COLUMBIA : PRINCE EDWARD ISLAND : MANITOBA
 : NORTHWEST TERRITORIES : YUKON
 : ALASKA
 : HAWAII
 : PUERTO RICO
 : VIRGIN ISLANDS 
OF THE U.S
The information for these countries and regions is recorded on a separate media.
ALAZARCACOCTDE
GAIDILINIAKSKYLAMEMDMAMIMNMSMO
MTNENVNHNJNMNYNCNDOHOKORPARISCSDTNTXUTVTVAWAWV
WIWYDCABONQCSK
NBNSNUBCPEMBNTYTAKHIPRVI
 ) 9 C 2 % : - C ) 2  F S S O   4 E K I      8 L Y V W H E ]   % T V M P                 4 1 
Page 34 of 124
34
Before 
UseGetting
started
Routing
Destination Entry and Route Search
Point of 
interest
Emergency
Open the 
[DESTINATION 
ENTRY] Menu SelectWhen entering 
the destination 
point directly 
Select
When narrowing 
down to city 
name
Select  : 
Cancel the city 
selection.
 : 
Displays list of 5 
city names near
ethe current 
position.
 : 
Displays the cityname input 
screen.
SelectWhen stopped
Displays the police 
station select screen.
Displays the hospital 
select screen.
When driving
Sets the destination to the 
nearest police station 
automatically.
Sets the destination to the 
nearest hospital 
automatically.
 ) 9 C 2 % : - C ) 2  F S S O   4 E K I      8 L Y V W H E ]   % T V M P                 4 1 
Page 42 of 124
42
Before 
UseGetting
started
Routing
Route Options
l
During route guidance you can 
change the route options, stop or 
check the route.
Before Steps  select   
Route
Preferences
Modification
of
Destination
or Way Point 
Positions
Deletion of 
Destination or 
Way Points
Detour
Tu r n  L i s t
MENU
Open the 
[ROUTE 
OPTIONS] MenuSelect
Select
Select the 
button for the 
location to be 
modified.
Select the way points 
to change the order.
Change the destination 
and the passing order of the 
destination and way points.
Select the button 
corresponding to the 
destination or way 
point to be deleted.
Select
Select
The Enter Route 
screen appears.
Select
(Change 
Location).
Shows the mathe destinatioway points.
Press
to changeorder. 
Select
Select
from the roto be avoid
Searches50 miles)selected
to the se
Whole R
from the 
 ) 9 C 2 % : - C ) 2  F S S O   4 E K I      8 L Y V W H E ]   % T V M P                 4 1 
Page 43 of 124
43
Before 
UseGetting
started
Routing
nDo not keep your eyes fixed on the monitor screen or operate the system while drivingDo not change the settings and destination locations while driving. Minimize the time spent viewing the monitor screen and 
listening to the voice guidance while driving. Operating the system will distract the driver from looking ahead of the vehicle 
and
may cause an accident. Always stop the vehicle in a safe location and use the parking brake before operating the system.Warning
Select  or  for toll 
roads, major roads, ferry, 
restricted roads and border 
crossing.
The route will not necessarily follow 
the specified conditions.
Select the button for the location to be modified.
Select the way points to change the order.Change the destination and the passing order of the destination and way points.
   
Select the button corresponding to the destination or way point to be deleted.
   
The Enter Route screen appears.
MAP
MAP
MAP
Select  
(Change 
Location).
Shows the map for 
the destination/
way points.
Press   
to change the 
order. 
Select
Select  
from the roads 
to be avoided. 
:
Searches the detour routes at 1-80 km (0.625-
50 miles) from the present position to the 
selected route. (Display range varies according 
to the set distance of the selected route.) 
Whole Route searches the route that detours 
from the present position for all routes.
MAP
Move  to loca-
tion and then 
press
 .
:
:Cancel the deletion
:
:Cancel the setting
 ) 9 C 2 % : - C ) 2  F S S O   4 E K I      8 L Y V W H E ]   % T V M P                 4 1 
Page 44 of 124
44
Before 
UseGetting
started
Routing
Route Options
Before Steps  select 
 
Display 
Route
Route
Preview
Setting the 
conditions
for 
simulation 
run
MENU
Open the 
[ROUTE 
OPTIONS] Menu
Select
Select
Use the but
 :Move 
 :Carry o
will be 
 : Stop t
 :Carry o
button 
 :Move 
 :Displ
a
POIs: D
it will bedisplay 
 ) 9 C 2 % : - C ) 2  F S S O   4 E K I      8 L Y V W H E ]   % T V M P                 4 1 
Page 45 of 124
45
Before 
UseGetting
started
Routing
Use the buttons displayed on screen to carry out a simulation run.
 : Move to the start point.
 : Carry out a simulation run in the direction of the start point. When the run has been started, this button 
will be displayed as  , and when selected, it will cause to take place at high speed.
 : Stop the simulation run.
 : Carry out a simulation run in the direction of the destination. When the run has been started, this button will be displayed as  , and when selected, it will cause to take place at high speed.
 : Move to the destination.
 : Displays the [EDIT ROUTE PREVIEW] screen.
 : Stops at the destination or the next way point.
 : Stops at a point of interest which has been set up on the route. : Delete the POI which has been selected.POIs: Display the six POIs from Quick-POI storage. When one of these is selected, 
it will be displayed on the map; furthermore,   can be selected to 
display items other than shown here. For more details, refer to page 19. 
RETURN
 ) 9 C 2 % : - C ) 2  F S S O   4 E K I      8 L Y V W H E ]   % T V M P                 4 1 
Page 52 of 124
52
Before 
UseGetting
started
RoutingAddress 
Book
Voice Recognition
Switch Operation List
Mode (status)Switch
operationTarget operation
Standby Short press
Voice recognition activated (All command-
waiting)
Long press Bluetooth hands-free voice recognition 
activated (Short-cut operation).
For details, refer to the "Bluetooth Hands 
Free" in the owner's manual.
During navigation voice 
recognition Short press (No operation.)
Long press Voice recognition ended.
During TEL voice 
recognition (No call) Short press Voice recognition interrupted.
Long press Voice recognition ended.
During TEL voice 
recognition (During a call) Short press Voice recognition interrupted.
Long press Voice recognition stopped, returns to call.
During call Short press Call ended.
Long press Call ended.
Call received from user A Short press Call accepted.
Long press Call rejected.
During call with user A Short press Voice recognition interrupted.
Long press Call ended.
Call received from user B 
during call with user A Short press User B call accepted, user A put on hold.
Long press User B call rejected.
During call with user A 
and user B on hold Short press Switches to user B, user A put on hold.
Long press Switches to user B, call with user A ended.
During call with user B 
and user A on hold Short press Switches to user A, user B put on hold.
Long press Switches to user A, user B call ended.
 ) 9 C 2 % : - C ) 2  F S S O   4 E K I      8 L Y V W H E ]   % T V M P                 4 1 
Page 56 of 124
56
Before 
UseGetting
started
RoutingAddress 
Book
Vo i c e  Recognition
Navigation 
Set Up
If necessary
Precautions/System Performance
Voice guidance has the following functions:
nIntersection guidance
l
The system voice announces the distance to an upcoming turn and the turning direction.
This guidance function is automatic. Therefore, you do not have to set it, and it cannot be 
disabled.
l The system vocally announces the distance to an upcoming highway branching point or 
junction.
Voice Guidance
l The navigation system is just a support system for the driver. The driver should 
always pay attention to the traffic situation to safely make decisions. You may 
be unable at times to arrive at your destination due to out-of-date information 
on a map disc. You should be especially careful when selecting an urgent 
destination such as a hospital or a police station.
l Your route may sometimes include roads that are not open to vehicles or are 
closed due to traffic regulations. Please comply with the local traffic 
regulations.
l Do not change the settings and destination locations while driving. Minimize 
the time spent viewing the monitor screen and listening to the voice guidance 
while driving. Operating the system will distract the driver from looking ahead 
of the vehicle and may cause an accident. Always stop the vehicle in a safe 
location and use the parking brake before operating the system.
When two intersections are close together, the 
voice guidance may be late. When two roundabouts are close together, the 
voice guidance for the second may be late.
Warnings
Second branching pointFirst branching point150m
100m
Route
 In 700m left turn. Left turn ahead,
then right turn.
Roundabout.
Take the second
exit.
 ) 9 C 2 % : - C ) 2  F S S O   4 E K I      8 L Y V W H E ]   % T V M P                 4 1