MAZDA MODEL 6 2013 Navigation Manual (in English)

31
Before
UseGetting
started
Routing
lFor Character Entry, please refer to page 39.
lDo not keep your eyes fixed on the monitor screen or operate the system while driving.Do not change the settings and destination locations while driving. Minimize the time spent
viewing the monitor screen and listening to the voice guidance while driving. Operating the system
will distract the driver from looking ahead of the vehicle and may cause an accident. Always stop
the vehicle in a safe location before operating the system.
lRoute searches with the navigation system can include roads that you cannot drive on and roads that you
are prohibited from driving on due to traffic regulations. Please comply with the traffic regulations.
Warnings
Select the desired Search Area
ALABAMA
ARIZONA
ARKANSAS
CALIFORNIA
COLORADO
CONNECTICUT
DELAWARE
FLORIDA
GEORGIA
IDAHO
ILLINOIS
INDIANA
IOWA
KANSAS
KENTUCKY
LOUISIANA
MAINE
MARYLAND
MASSACHUSETTS
MICHIGAN
MINNESOTA
MISSISSIPPI
MISSOURI MONTANA
NEBRASKA
NEVADA
NEW HAMPSHIRE
NEW JERSEY
NEW MEXICO
NEW YORK
NORTH CAROLINA
NORTH DAKOTA
OHIO
OKLAHOMA
OREGON
PENNSYLVANIA
RHODE ISLAND
SOUTH CAROLINA
SOUTH DAKOTA
TENNESSEE
TEXAS
UTAH
VERMONT
VIRGINIA
WASHINGTON
WEST VIRGINIA WISCONSIN
WYOMING
WASHINGTON, D.C.
ALBERTA
ONTARIO
QUEBEC
SASKATCHEWAN
NEWFOUNDLAND AND LABRADORNEW BRUNSWICK
NOVA SCOTIA
NUNAVUT
BRITISH COLUMBIA
PRINCE EDWARD ISLAND
MANITOBA
NORTHWEST TERRITORIES
YUKON
ALASKA
HAWAII
PUERTO RICO
VIRGIN ISLANDS OF THE U.S
Select
Select
Map information is displayed.
Disc A
Disc B
The information for these countries and regions is recorded on the each media.
Input State nameThe number of candidate
states is decreasing by
inputting more characters.
If there are less than 4
search results, the list of
the results is displayed
automatically.

32
Before
UseGetting
started
Routing
Destination Entry and Route Search
Address
Open the
[DESTINATION
ENTRY] Menu SelectWhen narrowing
down to city name
Select
:
Cancel the city
selection.
:
Displays list of 5
city name
s
nearest the current
position.
Select
the
city
name
from
the
list
:
Displays the city
name input
screen
.
Enter
the
city
name
and
select
When narrowing
down to street name
Select
Enter the street
name and
select Select
the
street
name
from
the
list
When narrowing
down to house no.
Select
Enter the
house no. and
selectEsa

33
Before
UseGetting
started
Routing
lFor Character Entry, please refer to page 39.
When narrowing
down to city name
Select :
Cancel the city
selection.
:
Displays list of 5
city name
s
nearest the current
position.
Select
the
city
name
from
the
list Enter
the
street
name
and
select
Select
the
street
name
from
the
list Select
:
Displays the city
name input
screen
.
Enter
the
city
name
and
select Select
the
city
name
from
the
list Enter
the
street
name
and
selectSelect the
street name
from the list
When narrowing
down to street name
Select
Enter the street
name and
select Select
the
street
name
from
the
list Select
the
city
name
from
the
list
Enter the
house no.
Select Direct
destination
input (Step 3)
( page 40)
Select
the
city
name
from
the
list
When narrowing
down to house no.
Select
Enter the
house no. and
select Enter the
street name
and select Select
the
street
name
from the
listSelect
the city
name
from the
list
Enter
the
house
no.
Enter
the
street
name
of the
2nd
street
Enter

34
Before
UseGetting
started
Routing
Destination Entry and Route Search
Point of
interest
Open the
[DESTINATION
ENTRY] Menu SelectWhen entering
the destination
point directly
Select
When narrowing
down to city
name
Select :
Cancel the city
selection.
:
Displays list of 5
city names nearest
the current
position.Select thecity namefrom the
list
:
Displays the city
name input
screen. Enter th
ecity nameand selec
When narrowing
down to category
name
Select Select the
category
name from
the list
When narrowing
down to the
nearest facility
Select
: Searches for
facilities close to the nearest city hal
: Searches for
facilities near the current
position.
: Searches for
facilities near the previous map.
: Searches fofacilities near the preset destination.
When narrowing
down to a phone
number
Select Enter the phone number and
select
: Searches for facilities nearthe current destination.- : Searches for facilitiesnear the way point.

35
Before
UseGetting
started
Routing
lFor Character Entry, please refer to page 39.
When entering
the destination
point directly
Select
Enter
the POI
name
and
select Select
the POI
from
the list
When narrowing
down to city
name
Select
:
Cancel the city
selection.
:
Displays list of 5
city names nearest
the current
position.Select the
city name
from the
listDirect
destination
input (Step 3)
( page 40)
:
Displays the city
name input
screen. Enter the
city name
and select
Select the
city name
from the
list
When narrowing
down to category
name
Select Select the
category
name from
the list
When narrowing
down to the
nearest facility
Select
: Searches for
facilities close to the nearest city hall.Enter the city
center name
and select Scroll the map as
necessary and
select
: Searches for
facilities near the current
position.
Select the
Category
name from
the list and
select
: Searches for
facilities near the previous map.Scroll the map
as necessary
and select
: Searches for
facilities near the preset destination.Select the
facility from
the list and
select
When narrowing
down to a phone
number
Select Enter the phone number and
select
: Searches for facilities near
the current destination.
- : Searches for facilitiesnear the way point.

36
Before
UseGetting
started
Routing
Destination Entry and Route Search
Before Steps select
Emergency
Memory Point
Home
Preset Destinations
Previous Destinations
Freeway On/
Off Ramp
Coordinates
Select from
map
MENU
Open the
[DESTINATION
ENTRY] Menu SelectWhen stopped
Displays the police
station select screen.
S
Displays the hospital
select screen.
When driving
Sets the destination to
the nearest police
station automatically.
Sets the destination to
the nearest hospital
automatically.
SelectSelect the desired Me : Display up to five previou: Display the next sugge
: The order of the displayed lis
Select
Select
Select the desired Pres
SelectSelect the Previous De
SelectSelect the name
of the freeway S
SelectEnter the latitude
:degrees
:minutes
:seconds
Elo
Select

37
Before
UseGetting
started
Routing
lFor Character Entry, please refer to page 39.
When stopped
Displays the police
station select screen.
Select the sort methods : Sorts the police station
or the hospital by distance.
: Sorts the police station
or the hospital by name.
Select
Displays the hospital
select screen.
When driving
Sets the destination to
the nearest police
station automatically.
Sets the destination to
the nearest hospital
automatically.
Select the desired Memory Point : Display up to five previous suggestions. : Display the next suggestions.
:
The order of the displayed list can be changed.
Select the desired Preset Dest.
Select the Previous Dest.
Direct
destination
input (Step 3)
( page 40)Select the name
of the freeway Select
or Select the
desired the On
Ramp or the Off
Ramp name.
Enter the latitude
:degrees
:minutes
:seconds
Enter the
longitude
:degrees
:minutes
:seconds
Select
Select the
name from
the list

38
Before
UseGetting
started
Routing
Quick POI
l
You can select one of the Six
Categories on the menu or List
Categories and then select the POI
(Point of Interest) to be displayed on
the map.
Before StepsSelect
Displaying
POI(s) on a
Map
Local
Search
Deleting
POI
Markers
Before StepsDisplaying POI(s) on a Map ( above)
Showing
POI Data
Open the
[QUICK POI]Select the
categories to be
displayed up to a
maximum of five.
l
POI icon chart
( page 41)
For categories
other than the six
displayed, select
and
select them from
the list shown.
Select the POI
you want to find
from the listed
facilities.
After you make a
selection, the point of
interest you selected
appears on the map.: Search POI
along the route
during the guidance
and show the list.
Display the POI. Select the desired
POI by moving on
top of the POI icon.
The name of the selected
POI appears.
If no data is stored for the
selected POI, the POI
name is not displayed.
Select
(Information)
The POI(s) data is
displayed.

39
Before
UseGetting
started
Routing
Character Entry
Street
name, city
name, and
other input
House phone
number, and
other input
Select the first several
characters on the screen.
(Step 1) Select your target
in the list.
(Step 2)
lIf a desired name is not in
the list, go back to Step 1,
and try fewer characters.
: Display up to five previous
suggestions.
: Display the next suggestions.
: Text flow (Right)
: Text flow (Left) : Move the cursor to the previous position and delete a character.
: The list appears.
lExamples
Street: CANAL Street: 52nd Ave.
Enter by selecting characters: Enter by selecting characters:
Select Select
Names of which spelling starts
with the entered character appear.
Street: MAIN STREET
Enter by selecting characters:CA 52nd A
MA I N S
Select the characters on
the screen. Select
:Move the cursor to
the previous position
and delete a
character.

40
Before
UseGetting
started
Routing
Direct Destination Input
Direct
Destination
Input
Selecting
Route
1
Touch the map to set the
cursor to the desired
destination.The map
scrolls faster the further
away the touched
location is from the
cursor.
Scroll the map and change the map
scale if necessary.
2
Select
3
Select Route calculation will be carried out and the entire route
will be displayed on the map.
Select (Way point) to set the address as a way point
on your route ( page 25). You can set up to 5 way
points per trip.
4
Select Route guidance begins using displayed route.
Note
l
If your desired route cannot be found, (Route
Options) allows the route option settings to be changed.
( page 42)
l Selecting for five seconds or more will launch the
Demo mode.
Operate after Step 3 of [Direct Destination Input]
4
The calculation route can be selected from one of three
types namely, Quick (the fastest route), Short (the shortest
route), or Altern. (the standard route).
5
Select (Information).Details regarding the individual routes (i.e., required time,
total distance, roads used, etc.)
Select either , , or , and then select
when you have decided
on the route to be used.