window MAZDA MODEL CX-5 2013 Quick Guide (in English)

3
Before Driving
ON/OFF button Indicator light
Close
OpenLeft rear
window
Right rear windowFront
passenger's
window
Driver's window
Master control switches
Mirror switch
Centre position
Outside Mirrors
1. Rotate the mirror switch to the left or
right to choose the left or right side
mirror.
2. Press the mirror switch in the
appropriate direction.
For details, refer to Section 3, “Mirrors” or “Windows”.
Rearview Mirror
Auto-dimming mirror
The auto-dimming mirror automatically reduces
glare of headlights from cars at the rear when the
ignition is switched ON.
Press the ON/OFF button to cancel the automatic
dimming function. The indicator light will turn off.
To reactivate the automatic dimming function, press the
ON/OFF button. The indicator light will illuminate.
Operation of the Power Windows
Each passenger window can also be operated using the master control switches on
the driver's door.
To open the window to the desired position, lightly hold down the switch.
To close the window to the desired position, lightly pull up the switch.
%:A',''&A'FKVKQPA3WKEM)WKFGKPFD

When Driving
11
Smart City Brake Support (SCBS)
The Smart City Brake Support (SCBS) system is designed to reduce damage in the
event of a collision by operating the brake control (SCBS brake) when the
system's laser sensor detects a vehicle ahead and determines that a collision with
the vehicle ahead is unavoidable.
For details, refer to Section 4, “Smart City Brake Support (SCBS)”.
It may also be possible to avoid a collision if the relative speed between your
vehicle and the vehicle ahead is less than about 15 km/h (9.3 mph).
Do not rely completely on the Smart City Brake Support (SCBS) system:
The Smart City Brake Support (SCBS) is a system which operates in response to a
vehicle ahead. It does not apply to 2-wheeled vehicles or pedestrians.
If the vehicle height or inclination is changed, the system will not be able to
correctly detect vehicles ahead resulting in the Smart City Brake Support
(SCBS) system not operating normally or mistakenly operating, which
could cause a serious accident.
WARNING
Do not modify the suspension:
NOTE
The Smart City Brake Support (SCBS) detects a vehicle ahead by emitting a
near-infrared laser beam and receiving the beam reflected off the reflector of the
vehicle ahead, and then using it for the measurement. Consequently, the Smart
City Brake Support (SCBS) may not operate under the following conditions:
• Trucks with low loading platforms and vehicles with an extremely low or
high profile.
• Under bad weather condition, such as rain, fog and snow.
• The window washer is being used or the windscreen wipers are not used when
its raining.
• The windscreen is dirty.
• The steering wheel is turned completely left or right, or the vehicle is acceler-
ated rapidly and comes close to the vehicle ahead.
Other details are described in the related text.
%:A',''&A'FKVKQPA3WKEM)WKFGKPFD

Interior Features
13
Airflow display
Temperature setting display (driver)
Mode selector display A/CTemperature setting display (passenger)
Air intake selector
(recirculated air
position)
Air intake selector
(outside air position)
Driver temperature control dialAUTO switch
Mode selector switchFan control dialOFF switch Windscreen defroster switch
Rear window defogger switchPassenger temperature control dialDUAL switchA/C switch
Air-Conditioning System (Fully Automatic Type)
Operation of Automatic Air Conditioning
1. Press the AUTO switch. Selection of the airflow mode, air intake selector and
amount of airflow will be automatically controlled.
2. Use the temperature control dial to select a desired temperature.
3. To turn off the system, press the OFF switch.
Press the DUAL switch or turn the front passenger temperature control dial to
control the set temperature individually for the driver and front passenger.
For details, refer to Section 5, “Air-Conditioning System”.
%:A',''&A'FKVKQPA3WKEM)WKFGKPFD