warning light MAZDA MODEL CX-5 2015 Quick Guide (in English)

7
When Driving
For details, refer to Section 4, “Start/Stop Engine”.
i-stop OFF Switch
By pressing the switch until a beep sounds,
the i-stop function is turned off and the i-stop
warning light (amber) in the instrument
cluster turns on. By pressing the switch again
until the beep sounds, the i-stop function
becomes operational and the i-stop warning
light (amber) turns off.
i-stop Warning Beep
If the driver's door is opened while engine idling is stopped, the warning sound
operates to notify the driver that engine idling is stopped. It stops when the driver's
door is closed.
i-stop indicator light (green)/i-stop warning light (amber)
i-stop indicator light (green)
• When the engine idling is stopped.
Engine idling stop conditions are met while the vehicle
is being driven.
• The light turns on when the ignition is switched ON and
turns off when the engine is started. i-stop warning light (amber)
• The light turns on when the i-stop OFF switch is
pressed and the system is turned off. • (Except European model)
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

8
When Driving
For details, refer to Section 4, “Instrument Cluster and Display”.
Warning/Indicator Lights
Signal Warning/Indicator Lights
1
2
3
4
7
8
9
10
11
12Brake System Warning Light Master Warning Light
ABS Warning Light
Charging System Warning
Indication/Warning Light
Engine Oil Warning Light
Check Engine Light
High Engine Coolant Temperature
Warning Light (Red)
i-stop Warning Light
(Amber)/Indicator Light (Green)
14
17
18
19Automatic Transaxle Warning
Indication
Power Steering Malfunction
Indication
20Air Bag/Front Seat Belt Pretensioner
System Warning Light
Low Fuel Warning Light
21Seat Belt Warning Light
22
2327
28
29
35
36
38
40Tyre Pressure Monitoring System
Warning Light
KEY Indication
High Beam Control System (HBC)
Warning Light (Amber)/Indicator
Light (Green)
TCS/DSC Indicator Light
TCS OFF Indicator Light
Low Engine Coolant Temperature
Indicator Light (Blue)
41
42
43
44
45Shift Position Indication
Headlight High-Beam Indicator Light
Direction indicator/Hazard Warning
Indicator Lights
Security Indicator Light
49
Cruise Main Indicator Light (Amber)/
Cruise Set Indicator Light (Green)
Lights-On Indicator Light
51Front Fog Light Indicator Light
Rear Fog Light Indicator Light
52Signal Warning/Indicator Lights
Warning (Display Indication)
Some of the warning/indicator lights are displayed in the instrument cluster.
If a warning/indicator light is displayed in the instrument cluster, verify the
meaning of the warning in the Warning (Display Indication) item.
Glow Indicator Light
Diesel Particulate Filter Indication
Wrench Indication31
32
33
Vehicle Speed Warning Indication
34Low Ambient Temperature Warning
Indication
Low Washer Fluid Level Warning
Indication 25
Mazda Radar Cruise Control
(MRCC) Warning Light
(Amber)/Indicator Light (Green) 46
24
Electric Parking Brake Indicator Light
Electric Parking Brake Warning Light
Lane-Keep Assist System Indication
Lane-Keep Assist System OFF Indication
Lane Departure Warning System
(LDWS) Indication
Lane Departure Warning System
(LDWS) OFF Indication
4WD Warning Indication
Door-Ajar Warning Indication
Liftgate-Ajar Warning Indication
Adaptive LED Headlights Warning
Light (Amber)/Indicator Light (Green)
Smart Brake Support/Smart City Brake
Support (SBS/SCBS) OFF Indicator Light
Smart City Brake Support (SCBS)
Warning Indication
i-ELOOP Indication
Select Mode Indication
Blind Spot Monitoring (BSM) OFF Indication
LED Headlight Warning Light 5
6
13
15
1630
37
39
47
48
50120 km/h Warning Light
26
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

When Driving
11For details, refer to Section 4, “i-ACTIVSENSE”.
i-ACTIVSENSE
i-ACTIVSENSE is a collective term covering a series of advanced safety and driver
support systems which make use of a Forward Sensing Camera (FSC) and radar
sensors.
These systems consist of active safety and pre-crash safety systems.
Driver awareness support systems
• Adaptive Front Lighting System (AFS)
• High-Beam Control system (HBC)
• Adaptive LED Headlights
• Lane Departure Warning System (LDWS)
• Blind Spot Monitoring (BSM)
• Distance Recognition Support System (DRSS)
• Driver attention alert
These systems are designed to assist the driver in safer driving by reducing the load
on the driver and helping to avert collisions or reduce their severity. However,
because each system has its limitations, always drive carefully and do not rely
solely on the systems.
Active Safety Technology
Active Safety Technology supports safer driving by helping the driver to recognise
potential hazards and avert accidents.
Nighttime visibility
Forward/rear detection
Inter-vehicle distance recognition
Driver fatigue detection
• Rear Cross Traffic Alert (RCTA)
Rear obstruction detection when leaving a parking space
• Mazda Radar Cruise Control (MRCC)
• Lane-keep assist system
Inter-vehicle distance
Lane departure
• Adjustable Speed Limiter
Speed control
Collision damage reduction in low vehicle speed range
• Smart City Brake Support [Forward] (SCBS F)
Pre-Crash Safety Technology
Pre-crash safety technology is designed to assist the driver in averting collisions or
reduce their severity in situations where they cannot be avoided.
Forward driving
• Smart City Brake Support [Reverse] (SCBS R)
• Smart Brake Support (SBS)
Reverse driving
Collision damage reduction in medium/high speed range
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

15
When Driving
For details, refer to Section 4, “Mazda Radar Cruise Control (MRCC)”.
Mazda Radar Cruise Control (MRCC) Display IndicationSetting the Mazda Radar Cruise Control (MRCC)
The Mazda Radar Cruise Control (MRCC) system may be cancelled during rain,
fog, snow or other inclement weather conditions, or when the front surface of the
radiator grille is dirty.
NOTE
Under the following conditions, operation of the Mazda Radar Cruise Control
(MRCC) system is temporarily cancelled, a cancel indication is indicated in the
display in the instrument cluster, and the MRCC indicator light (green) turns off
simultaneously.
• The CANCEL switch is pressed or the brake pedal is depressed.
The setting status of the Mazda Radar Cruise Control (MRCC) system is indicated
in the display in the instrument cluster.
A system malfunction or operation conditions are indicated by a warning.
• The parking brake is applied.
• The shift lever is in the P, N, or R position (for manual transaxle vehicles,
R position only).
• The vehicle speed decreases to less than 25 km (16mph).
• The DSC, Smart Brake Support (SBS) system, or the Smart City Brake
Support (SCBS) system is operating.
• A system malfunction is detected.
Other details are described in the related text.
Vehicle ahead display
MRCC Set vehicle speedMRCC Distance between
vehicle display
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

25
When Driving
X Mark Full Low
Diesel Particulate Filter
The diesel particulate filter collects and removes most of the particulate matter
(PM) in the exhaust gas of a diesel engine.
Inspect the engine oil level periodically (before getting in the vehicle). When
inspecting the engine oil, if the engine oil level is close to or exceeds the “X” mark
on the dipstick, replace the engine oil.
Whenever the engine oil is replaced, the vehicles engine control unit needs to be
reset as soon as possible. Otherwise the wrench indicator light or engine oil
warning light may turn on.
For details, refer to Section 4, “i-ELOOP”, “Tyre Pressure Monitoring System”,
“Diesel Particulate Filter” or Section 6, “Owner Maintenance”.
The Tyre Pressure Monitoring System (TPMS) monitors the air pressure of all
four wheels. If the air pressure of one or more tyres is too low, the system warns
the driver by indicating the tyre pressure monitoring system warning light in the
instrument cluster and operating a beep sound.
In the following cases, system initialization must be performed so that the system
operates normally.
• A tyre pressure is adjusted.
• Tyre rotation is performed.
• A tyre or wheel is replaced.
• The battery is replaced or completely drained.
• The tyre pressure monitoring system warning
light is illuminated.
Tyre Pressure Monitoring System
To reset the engine control unit, refer to the vehicle engine control unit reset
procedure or consult an expert repairer, we recommend an Authorised Mazda
Repairer.
i-ELOOP Charging Display
If the vehicle is driven while “i-ELOOP charging”
is displayed, a beep sound is heard. Make sure the
message is no longer displayed before driving.
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

If Trouble Arises
28
If Trouble Arises
• Flat Tyre
If you have a flat tyre, drive slowly to a level spot that is well off the road and
out of the way of traffic to change the tyre.
In the event of a flat tyre, use the temporary spare tyre.
• Overheating
1. Drive safely to the side of the road and park off the right-of-way.
2. Check whether coolant or steam is escaping from the engine compartment.
If steam is coming from the engine compartment:
Do not go near the front of the vehicle. Stop the engine.
Wait until the steam dissipates, then open the bonnet and start the engine.
If neither coolant nor steam is escaping:
Open the bonnet and idle the engine until it cools.
• Towing Description
We recommend that towing be done only by an expert repairer, we recommend
an Authorised Mazda Repairer or a commercial tow-truck service.
• Warning Lights and Warning Sounds
If a warning light illuminates or flashes or a warning sound is heard, check for
details concerning the warning light or sound in this guide. If the problem
cannot be resolved, contact an Authorised Mazda Repairer.
For details, refer to Section 7, “Flat Tyre”, “Overheating”, “Emergency Towing” or
“Warning/Indicator Lights and Warning Sounds”.
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD