window MAZDA MODEL CX-5 2015 Quick Guide (in English)

Page 4 of 29

3
Before Driving
ON/OFF button
Indicator light
Close
Open
Outside Mirrors
1. Rotate the mirror switch to the left or
right to choose the left or right side
mirror.
2. Press the mirror switch in the
appropriate direction.
For details, refer to Section 3, “Mirrors” or “Windows”.
Rearview Mirror
Auto-dimming mirror
The auto-dimming mirror automatically reduces
glare of headlights from cars at the rear when the
ignition is switched ON.
Press the ON/OFF button to cancel the automatic
dimming function. The indicator light will turn off.
To reactivate the automatic dimming function, press the
ON/OFF button. The indicator light will illuminate.
Operation of the Power Windows
Each passenger window can also be operated using the master control switches on
the driver's door.
To open the window to the desired position, lightly hold down the switch.
To close the window to the desired position, lightly pull up the switch.
Mirror switch
Centre position
Master control switches
Right rear window Left rear window
Front passenger's windowDriver's window
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

Page 22 of 29

When Driving
1219
NOTE
• (Smart City Brake Support [Forward] (SCBS F))
• Trucks with low loading platforms and vehicles with an extremely low or
high profile.
Smart City Brake Support [Forward] (SCBS F)/Smart City Brake Support [Reverse] (SCBS R)
The Smart City Brake Support [Forward] (SCBS F) detects a vehicle ahead
by emitting a near-infrared laser beam and receiving the beam reflected off
the reflector of the vehicle ahead, and then using it for the measurement.
Consequently, the Smart City Brake Support [Forward] (SCBS F) may not
operate under the following conditions:

Under bad weather condition, such as rain, fog and snow.
• The window washer is being used or the windscreen wipers are not used
when it's raining.
• The windscreen is dirty.
• The steering wheel is turned completely left or right, or the vehicle is
accelerated rapidly and comes close to the vehicle ahead.
• (Smart City Brake Support [Reverse] (SCBS R))
• The obstruction is small.
The Smart City Brake Support [Reverse] (SCBS R) operates using ultrasonic
sensors (rear) which detect obstructions at the rear by emitting ultrasonic
waves and then receiving the returning waves reflected off the obstructions.

The obstruction is thin such as a signpost.
• The obstruction is soft such as a hanging curtain or snow stuck to a vehicle.
• The obstruction is shaped irregularly.
• The surface of the obstruction is not pointed vertically relative to the vehicle.
In the following cases, the ultrasonic sensors (rear) cannot detect obstructions
and the Smart City Brake Support [Reverse] (SCBS R) may not operate.

The obstruction is positioned away from the centre of the vehicle.
• Something is stuck on the bumper near an ultrasonic sensor (rear).
• When travelling near objects such as foliage, barriers, vehicles, walls, and
fences along a road.
• When driving off-road in areas where there is grass and forage.
Other details are described in the related text.
For details, refer to Section 4, “Smart City Brake Support [Forward] (SCBS
F)”, “Smart City Brake Support [Reverse] (SCBS R)”.
Other details are described in the related text.
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

Page 27 of 29

Interior Features
26
Airflow display Temperature setting display (driver)
Mode selector
display A/C mode display
Temperature setting display (passenger)
Air intake selector
(recirculated air
position)
Air intake selector
(outside air position) Driver temperature control dial
AUTO switch
Mode selector switch Fan control switchOFF
switchWindscreen defroster switch
Rear window defogger switch
Passenger temperature
control dial
DUAL switch A/C switch
Air-Conditioning System (Fully Automatic Type)
Operation of Automatic Air Conditioning
1. Press the AUTO switch. Selection of the airflow mode, air intake selector and
amount of airflow will be automatically controlled.
2. Use the temperature control dial to select a desired temperature.
3. To turn off the system, press the OFF switch.
Press the DUAL switch or turn the front passenger temperature control dial to
control the set temperature individually for the driver and front passenger.
For details, refer to Section 5, “Air-Conditioning System”.
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD