height MAZDA MODEL CX-5 2020 (in English) Owner's Guide

ItemFeatureFactory Set-
ting Available
Settings Set-
tings
Chan ge
Meth od
Fuel Economy Monitor (page 4-113)
Ending display Display/non-display Off On/Off B ―
Fuel economy reset-
ting procedure*Linkage/non-linkage with fuel economy reset and
trip meter A reset Off On/Off B
―
Active Driving Display (page 4-58)
Display Setting can be changed so that the Active Driving
Display is not displayed.
On On/Off C
―
The display height (up/down position) can be
changed. 013 steps up/
down from
initial setting (total: 27steps) C
―
The method for adjusting the display brightness (au-
tomatically/manually) can be changed. Auto Auto/Man. C
―
The standard brightness wh ile automatic adjustment
is selected can be change d using the brightness ad-
justment. 02 steps up/
down from
initial setting
(total: 5steps) C
―
The standard brightness while manual adjustment is
selected can be changed using the brightness adjust-
ment. 020 steps up/
down from
initial setting (total: 41steps) C
―
The display angle can be changed. 03steps up/
down from
initial setting
(total: 7steps) C
―
The street name display timing can be changed.
On-Dem.On-Dem./At
Maneuver/Of f C
―
Display/non-display of the navigation guidance
On On/Off C―
*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda
recommends that these systems remain On.
*2 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. Thevolume of the warning beep during Rear Cross Traffic Alert (RCTA) operation cannot be changed.
*3 This system functions only when the navigation system is functioning.
Specifications
Personalization Features
9-16*Some models.
CX-5_8HX6-EA-19I_Edition2_old 2019-9-19 9:26:07