climate control MAZDA MODEL MX-30 EV 2022 User Guide

For Your Ride Comfort
▼For Your Ride Comfort
If the vehicle has been parked in
direct sunlight during hot weather,
open the windows to let warm air
escape, then run the climate control
system.
The climate control system measures
inside and outside temperatures,
humidity and sunlight using the
sunlight/temperature sensor. It sets
temperatures inside the cabin
accordingly.
CAUTION
Do not obstruct both sensors,
otherwise the climate control system
will not operate properly.
Sunlight sensor
1. Sunlight sensor
Interior temperature sensor
1. Interior temperature sensor
Clear all obstructions such as leaves,
snow and ice from the hood and the
air inlet in the cowl grille to improve
the system e
fficiency.
NOTE
If the air flow of the climate control
system significantly decreases, the air
fi lter may be clogged. Replace the air
fi lter.
Use the climate control system to
defog the windows and dehumidify
the air.
Run the air conditioner about 10
minutes at least once a month to
keep internal parts lubricated.
Have the air conditioner checked
before the weather gets hot. Lack of
refrigerant may make the air
conditioner less
effi cient.
The refrigerant specifications are
indicated on a label attached to the
inside of the motor compartment. If
the wrong type of refrigerant is used,
it could result in a serious
malfunction of the air conditioner.
Consult a professional, government
certi fied repairer for the inspection
or repair because a special device is
required for the air conditioner
maintenance.
For details, consult an Authorized
Mazda Dealer.
1. Label
Interior Features
Climate Control System
5-2
MX -30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07

Climate Control System Operation Area
▼List of Climate Control System Switches/Icons
Climate control system information is displayed on the display.
Auto operation screen
ƒ
AUTO switch...................................................................................... page 5-4
„ Seat warmer icon*............................................................................. page 2-21
… Steering warmer icon*....................................................................... page 2-23
† Seat warmer setting icon*.................................................................. page 2-21
Steering warmer setting icon*.............................................................page 2-23
‡ Climate control power switch.............................................................. page 5-5
ˆ Rear window defogger switch.............................................................. page 5-5
‰ Fan control icon.................................................................................. page 5-5
Š Fan control switch............................................................................... page 5-5
‹ Display setting icon............................................................................. page 5-5
ΠECO icon............................................................................................ page 5-6
Auto and manual operation screen switching icon................................. page 5-6
Ž A/C icon............................................................................................ page 5-6
Air intake selector icon........................................................................ page 5-6
Temperature control switch.................................................................. page 5-5
‘ Temperature control icon..................................................................... page 5-5
’ Windshield defroster switch................................................................. page 5-6
Interior Features
Climate Control System
*Some models.5-3
MX -30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07

Manual operation screen
ƒMode selector icon............................................................................. page 5-6
NOTE
Free/open source software information
This product includes free/open sources. Information about the licensing and source
code is available at the following URL.
https://www.alpine.com/m/e/oss/download/
▼ Touch Panel Basic Operation
CAUTION
Do not press the screen strongly or
press it with a sharp-pointed object.
Otherwise, the screen could be
damaged.
Touch panel operation
You can do three types of icon
operations on the touch panel using
your
finger including , touch, touch and
hold, and swipe operations.
Switching between auto and manual
operation screens
Touch the seat indication in the center
of the screen to switch from the auto
operation screen to the manual
operation screen. Press the AUTO
switch to switch from the manual
operation screen to the auto operation
screen.
▼ AUTO Switch
By pressing the AUTO switch the
following functions will be
automatically controlled in accordance
with the selected set temperature:
Air
flow temperatureAmount of
airflowSelection of airfl ow modeOutside/Recirculated air selectionAir conditioner (cooling, defrosting
functions) operation
*Seat warmer level selection*1
*Heated steering wheel operation*1
*1 Auto mode operates when auto mode is
enabled in the Mazda Connect settings.
Refer to the Settings section in the Mazda
Connect Owner's Manual.
Interior Features
Climate Control System
5-4*Some models.
MX-30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07

NOTE
AUTO switch indicator light
ON
The indicator light turns on during
auto operation.
OFF
When any switch or icon is operated
during auto operation, including the
, , , , , , , the
fan control switch, or the defroster
switch, the indicator light turns o ff.
At this time, the functions other than
the one operated operate
automatically.
▼ Temperature Control Switch/Icon
The temperature setting can be
adjusted between 15 °C (60 °F) and
29 °C (84 °F) by pressing the
temperature setting switch, or touching
the
(red) or (blue).
The temperature setting can be quickly
adjusted by pressing and holding the
temperature setting switch, or touching
and holding the
(red) or
(blue).
NOTE
When you set the temperature to the
lower or upper limit, “LO” or “HI” is
displayed.
The temperature units for the
temperature setting display can be
changed in conjunction with the
temperature units for the outside
temperature display.
When swiping the (red) or
(blue) up/down, the temperature
can be adjusted up or down in
increments of 3 °C (6 °F).
To reduce power consumption by
the climate control system, warm air flow may not be supplied when
the ambient temperature is 25 °C
(77 °F) or more.
▼ Fan Control Switch/Icon
The air
flow amount can be adjusted to
7 levels.
The air flow amount can be adjusted by
pressing the fan control switch, or by
touching the
or .
In addition, when the fan control
switch,
, or is pressed and held,
the air flow amount can be adjusted
quickly.
NOTE
When the or is swiped
upward, the air flow amount can be
increased at 3 levels. When swiped
downward, the air flow amount can
be decreased at 3 levels.
▼ Climate Control Power Switch
(System On/Off
)
The climate control system turns on
and
off each time the climate control
power switch is pressed.
▼ Rear Window Defogger Switch
Press the rear window defogger switch
to defrost the rear window.
When the defroster is operated, the
outside mirror defogger
* and the
windshield wiper de-icer* operate in
conjunction.
▼ Display Setting Icon
To u c h t h e to display the display
setting screen.
You can adjust the brightness (41
levels), select the screen from
Interior Features
Climate Control System
*Some models.5-5
MX -30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07

Auto/Day/Night, and adjust the
operation volume (mute or 3 levels).
To u c h t h e
to close the screen.
NOTE
For safety reasons, the setting screen is
not displayed while driving the vehicle.
▼ECO Icon
ECO mode switches on/o
ff each time
the icon is touched.
The operation frequency of the air
conditioner in ECO mode is less than
in normal mode, ma king driving more
economical.
▼ Auto and Manual Operation
Screen Switching Icon
Touch the seat indication in the center
of the screen to switch to the manual
operation screen.
The
, , , , and can be
operated.
▼ A/C Icon
Touch the A/C while the AUTO switch
is turned on will turn
off the air
conditioner (cooling, defrosting
functions).
The on/o ff of the air conditioner
switches each time the A/C is
touched.
While the air conditioner is operating,
the indicator light next to the A/C
turns on.
NOTE
The air conditioner operates when
the A/C is touched while the air
conditioner is turned o ff.
The air conditione r may not function
when the outside temperature
approaches 0 °C (32 °F).
▼ Air Intake Selector Icon
Outside or recirculated air positions
can be selected. Touch the
to
select outside/recirculated air
positions.
WARNING
Do not recirculate the air in the cabin
during cold or rainy weather:
Recirculating the air in the cabin during
cold and rainy weather is dangerous as
it will cause the windows to fog up.
Your vision will be hampered, which
could lead to a serious accident.
Recirculated air position (Indicator
light next to the
turns on)
Outside air is shut off. Use this position
when going through tunnels, driving in
congested tra ffic (high engine exhaust
areas) or when quick cooling is
desired.
Outside air position (Indicator light
next to the
turns o ff)
Outside air is allowed to enter the
cabin. Use this mode for ventilation or
windshield defrosting.
▼ Windshield Defroster Switch
Press the switch to defrost the
windshield and front door windows.
NOTE
The defroster can also be used by
touching the
.
▼Mode Selector Icon
When the , , , , or is
touched, the airfl ow mode can be
selected according to the purpose of
use.
Interior Features
Climate Control System
5-6
MX -30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07

NOTE
When on the auto operation screen,
touch the seat indication in the
center of the screen to display the
, , , , and icons.
When swiping the , , , ,
or
to the left, the icon two icons
to the left can be selected. When
swiping to the right, the icon two
icons to the right can be selected.
Basic Climate Control
System Operation
▼ Air Conditioner Basic Operation
Operate the air conditioner (cooling,
defrosting functions) with the EV
system started. The air conditioner can
be used while charging when the
power switch is switched ON. In
addition, Cabin preconditioning can
also be used when the power switch is
switched OFF.
NOTE
When the charging is completed with
the power switch switched ON, the air
conditioner (cooling , heating ,
defrosting functions) stops
automatically.
1. Press the AUTO switch. Selection of
the air flow mode, air intake
selector and amount of air flow will
be automatically controlled.
2. Operate the temperature setting
switch/
(red) or (blue) to
set the desired temperature.
NOTE
The recommended set
temperature is 22 °C (72 °F).
Setting the temperature to
maximum hot or cold will not
provide the desired temperature
at a faster rate.
The power consumption of the
air conditioner changes
depending on the set
temperature and the ambient
temperature. If the set
temperature is too low or high,
the remaining distance to full
discharge shortens.
3. To turn o ff the system, press the
climate control power switch.
Interior Features
Climate Control System
5-7
MX -30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07

▼Adjusting the Vents
Directing air
flow
To adjust the direction of air flow, move
the adjustment knob.
NOTE
When using the air conditioner
under humid ambient temperature
conditions, the system may blow fog
from the vents. This is not a sign of
trouble but a result of humid air
being suddenly cooled.
The air vents can be fully opened and
closed by operating the knob.
Side Vents
Air vent open/close
1. Knob
2. Open
3. Close

Air flow direction adjustment
1. Knob

Center Vents
Air vent open/close
1. Knob
2. Close
3. Open

Air flow direction adjustment
1. Knob
▼ Selecting the
Airflow Mode
Dashboard Vents
Interior Features
Climate Control System
5-8
MX
-30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07

Dashboard and Floor Vents
Floor Vents
Defroster and Floor Vents
Defroster Vents
NOTE
The location airflow exits the air vents
and the air flow amount may change
depending on the open or close status
of the air vents.
▼ Windshield Defrosting and
Defogging
WARNING
Set the temperature control to the hot
or warm position when defogging
(
position):
Using the
position with the
temperature control set to the cold
position is dangerous as it will cause
the outside of the windshield to fog
up. Your vision wi ll be hampered,
which could lead to a serious accident.
Press the windshield defroster switch,
or touch the
.
In this position, the outside air position
is automatically selected, and the air
conditioner automatically turns on.
The air conditioner will directly
dehumidify the air to the front
windshield and side windows. Air flow
amount will be increased.
NOTE
If any of the following operations is
done, the window glass will fog up
more easily:
Switching to recirculate modeTu r n i n g o ff the air conditioner
(cooling, defrosting functions)
For faster defrosting , do any of the
following operations
Operate the fan control switch/
to increase the air flow amount
Interior Features
Climate Control System
5-9
MX -30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07

Operate the temperature setting
switch/
(red) to increase the
air flow temperature
Only use the defroster when the
window glass needs to be defogged.
The power consumption of the air
conditioner is suppressed, making
driving more economical.
For defrost mode, warm air flow is
supplied for defrost even if the set
temperature is decreased, however,
this does not indicate a problem.
Convenient Ways to Use
the Climate Control System
▼Cautions Concerning Cabin
Preconditioning
Cabin preconditioning is a collective
term regarding use of the Climate
Control Timer and the remote climate
control.
You can cool or warm the cabin, or
defog the window glass before getting
in the vehicle by setting your departure
time in advance (Climate Control
Timer) or by a remote operation
(remote climate control) using your
Smartphone.
WARNING
Do not operate the cabin
preconditioning with people or pets
in the vehicle:
The cabin preconditioning may stop
automatically due to the vehicle
conditions and the surrounding
environment. If the climate control
system stops and the temperature
inside the vehicle increases or
decreases, it coul
d cause a serious
medical condition such as heat
exhaustion and dehydration or even
death.
CAUTION
 If any of the following conditions are
met, the cabin preconditioning will
not operate. In addition, if the cabin
preconditioning is operating, it will
stop. However, if the liftgate is
opened while the cabin
preconditioning is operating, the
cabin preconditioning will not stop.
Interior Features
Climate Control System
5-10
MX -30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07

The high voltage battery or the
lead-acid battery charge is low
 The doors/liftgate are open
 The power switch is switched to a
position other than OFF
 There is a problem with the vehicle
 If the operation conditions are not
met 30 minutes before the departure
time set by the climate control timer,
the climate control timer will not
operate.
 If any of the follo wing conditions is
met, the climate control system will
not operate e ffectively and the cabin
temperature may not reach the set
temperature:
 Your power consumption is high
 Extremely high or low
temperatures
 The climate control system stops at
the departure time. The cabin
temperature may not reach the set
temperature if you get in the vehicle
earlier or later than the set departure
time.
 If you operate the cabin
preconditioning while charging the
vehicle, it could take more time to
charge the high voltage battery.
 During the cabin preconditioning
operation, the cooling fan, the
compressor, and the cabin fans
operate, but this does not indicate a
problem.
 The climate control system functions
you can use di ffer depending on the
power switch position.
Function Power switch position
OFF ACC ON
(EV
sys-
tem
o ff ) ON
(EV
sys-
tem
on)
Air circulation — — X X
Function Power switch position
OFF ACC ON
(EV
sys-
tem o ff ) ON
(EV
sys-
tem on)
Cooling/heating — — X
*1X
Climate Control
Timer X ———
Remote climate
control X ———
X
: Available
—: Not available
*1 The cooling/heating function can be used only while charging.
NOTE
The recommended set temperature
is 22 °C (72 °F). If you set an
extremely high or low temperature,
power consumption will increase
and the charging time will take
longer.
If you operate the cabin
preconditioning while the charging
connector is connected, you can
reduce the electric power
consumption of the high voltage
battery. Cabin preconditioning can
be operated even without
connecting the charging connector,
however, the electrical power of the
high voltage battery will decrease.
If quick charge is started during cabin
preconditioning , the cabin
preconditioning is stopped.
While the cabin preconditioning is
operating , the indicator light for the
climate control power switch turns
on.
Interior Features
Climate Control System
5-11
MX -30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07