MERCEDES-BENZ B-CLASS HATCHBACK 2022 Owners Manual


Select Maximum ,  amps or  amps .
When t he battery is charged, the charging cur-
rent is limited to the selected amperage.
% For safety reasons, only use the charging
cable supplied wit
h the vehicle or an original
Mercedes-Benz charging cable. Mercedes-
Benz thoroughly tests these original charging
cables for their suitability for the high-voltage
charging of your vehicle. Purchase these parts
from your Mercedes-Benz Service Centre and
obtain advice there.
Activating or deactivating route-based operating
mode s
trategy 
Select Electric in city .
Depending on t
he previous status, the func-
tion is activated or deactivated. Calling up the energy
Oo
w displayMultimedia system:
4 © 5
EQ 
Select Energy flow .
The visualisation of t
he energy Oow in the vehi-
cle is displayed. Information on the status of the hybrid system
and t
he current state of charge of the high-voltage
battery is displayed in addition to the energy Oow. Functions of the energy Oo

w display 1
State of charge of the high-voltage battery
2 Combustion engine
3 Energy Oo
w
4 High-voltage battery
5 Status of the route-based operating-mode
s
trategy (  page 185)
The active components of the hybrid system are
highlight
ed on the energy Oow display. The energy Oow be
tween the individual components is shown
in colour.
The energy Oow
is shown in diMerent colours
depending on the operating status:
= White: constant energy Oow
= Red: high energy Oow (boost eMect)
= Green: low-emission energy Oow in the case of
recuperation, electric mode and charging the
high-voltage battery Navigation
Notes on navigation
Route guidance with augmented reality
&
WARNING Risk of accident and injur
y as a
result of distraction, incorrect depiction or
wrong interpretation of the display
The camera image of the augmented reality
displa
y is not suitable as a guide for driving. 
Always keep an eye on the actual tr
aPc
situation. 308
MBUX multimedia system


Avoid extended observation of the cam-
er
a image. &
WARNING Risk of accident and injur
y due
to imprecise positioning of additional
information
The additional information from the augmen-
t
ed reality display may be inaccurate and is
not a substitute for observing and assessing
the actual driving situation. 
Always keep an eye on the actual tr
aPc
situation when carrying out all driving
manoeuvres. Switching navigation on
Multimedia system:
4 © 5
Navigation (N

avigation)
Alternatively: press the z butt
on.
The map displays the current vehicle position.
The navigation menu is shown.
The navigation menu is hidden if route guid-
ance is active. 
To show: t
ap on the touchscreen.
The menu is hidden automatically. MBUX multimedia system
309

Navigation overview
Example: digital map with navigation menu
1 Enters a POI or address and additional desti-
nation entr y options
2 Interrupts route guidance (if route guidance is
activ

e)
3 Repeats a navigation announcement and
switc

h navigation announcements on or oM
4 Calls up the ON ROUTE menu !

!

The following entries can be made, for example:
= T
own, street, house number
= Street, town
= Postcode
= POI name or POI category, e.g. Parking
= Contact name 
Select a search result in list 3.
Calculate the route (  pag
e 312).
% You can Nnd fur
ther information about desti-
nation entry, e.g. three-word addresses, in the
Digital Owner's Manual.
Changing country 
Select the country indicator in 1.
Enter the country indicator. 
Select the country in 3.
Using online search
% Requirements: the media display shows an
Int
ernet connection in the status line with the
Q symbol. Destination entry uses online map services. If the
on-boar

d search Nnds no suitable destinations or
if you change countries, the online search is avail-
able.
For the destination you can enter an address, a
POI or a three-word address. 
Enter the destination in input line 2.
The sear
ch results are displayed. 
Select the destination in the list.
The de

tailed view for the route is displayed.
or 
Select country indicator 1. 
Select the provider for the online service from
t
he countries list. 
Enter the destination in input line 2. 
Select the destination in the list. Calculating a route and using settings for route
guidance
Requirements:
= The des

tination has been entered.
= The destination address is shown. Multimedia system:
4 © 5
Navigation 1
¥ N
o route yet.
¦ A r
oute has been mapped. 
Select ¥.
The r

oute to the destination is calculated.
Route guidance begins.
or 
Select ¦. 
Select Set as intermediate dest..
The des
tination address is set as the next
intermediate destination. 312
MBUX multimedia system

or

Select Start new route guidance.
The des tination address is set as the new des-
tination. The previous destination and the
intermediate destinations are deleted. Route
guidance to the new destination begins.
Selecting route settings 
Select =. 
Select Advanced. 
Select Route . 
Select the route type. 
Take tr
aPc information into consideration with
Dynamic route guidance H.
Select route options with Avoid options.
Activate Suggest alternative route.
Alt
ernative routes are calculated for every
route. 
Activate Activate commuter route .
If t
he requirements are met, the multimedia
system automatically detects that the vehicle
is on a commuter route. Route guidance
begins without voice output. Activating route guidance with augmented reality 
During route guidance, tap on the camera
symbol on t

he media display.
The camera image will be shown instead of
the navigation map before a turning manoeu-
vre and will show additional information. 
To return to the navigation map: t
ap on the
camera symbol again.
Displaying additional information in the camera
imag
e 
Select =. 
Select Advanced. 
Select Augmented Reality . 
Activate Street names and House numbers.
Dur
ing route guidance, street names and
house numbers are shown in the camera
image. Using map functions
Multimedia system:
4 © 5
Navigation
Se

tting the map scale 
To zoom in: t
ap twice quickly with one Nnger
on the media display. 
To zoom out: t
ap with two Nngers on the
media display.
Moving the map 
Move one Nng
er in any direction on the
touchscreen. 
To reset the map to the current vehicle posi-
tion: pr
ess = brieOy.
Selecting map orientation 
Tap repeatedly on the


Activate or deactivate Motorway information.Using services
Requirements:
= Ther
e is an Internet connection.
= Mercedes me connect is available.
= You have set up a user account in the
Mercedes me Portal.
= The vehicle is connected to a user account
and you have accepted the conditions of use
for the service.
Further information can be found at: https://
www.mercedes.me
= The service is available and has been activa-
ted.
= The following additional conditions apply to
the Parking service:
- The navigation services option is available,
subscribed to and activated in the
Mercedes me Portal.
- The parking service is part of the scope of
the Navigation Services. Multimedia system:
4 © 5
Navigation
Displa

ying the traPc situation with Live TraPc
Information 
Select =. 
Activate Traffic. 
Select Advanced. 
Select View . 
Select Map elements . 
Activate Traffic incidents , Free-flowing traffic
and Delay .
If tr

aPc information has been received, then
traPc incidents such as roadworks, road
blocks, local area reports (e.g. fog) and warn-
ing messages are displayed.
The traPc delay is displayed for the current
route. TraPc delays lasting one minute or lon-
ger are taken into consideration.
Displaying hazard warnings with Car-to-X commu-
nication
If hazar

d warnings are available these can be
shown as symbols on the map. The display depends on the settings for the
Traffic and Traf-
fic incidents op

tions. 
Set the options.
If Traffic is switc

hed oM and Traffic incidents
is switched on, the symbols are shown on the
prospective route.
Displaying weather information and other map
cont
ents 
Select =. 
Select Advanced. 
Select View . 
Select Map elements . 
Scroll up and show the ONLINE MAP CON-
TENTS cat

egory. 
Switch on a service, e.g. Weather.
Cur
rent weather information is displayed on
the navigation map, e.g. temperature or cloud
cover. 314
MBUX multimedia system

Parking service
* NOTE Damag e to the vehicle due to not
observing the maximum permitted head-
room clearance If the vehicle height is greater than the maxi-
mum per
mitted headroom clearance, the roof
and other parts of the vehicle may be dam-
aged. 
Observe the signposted headroom clear-
ance. 
If the vehicle height is greater than the
per
mitted headroom clearance, do not
enter. 
Observe the changed vehicle height with
add-on r
oof equipment. *
NOTE V
ehicle damage due to failure to
observe local information and parking
conditions The data is based on the information provided
b
y the respective service providers. Mercedes-Benz does not guarantee the accu-
r

acy of the information provided in relation to
the car park or parking area. 
Always observe the local information and
conditions. %
This service is not available in all countries. 
Select = and activ
ate Parking. 
Tap on j in t
he map. 
Select a parking option.
The map sho
ws the parking options in the
vicinity.
The following information is displayed (if avail-
able):
= Destination address, distance from current
vehicle position and arrival time
= Information on the multi-storey car
park/car park, for example:
- Opening times
- Parking charges
- Current occupancy
- Maximum parking time -
Maximum access height
The maximum access height sho

wn by
the parking service does not replace
the need for observation of the actual
circumstances.
= Available payment options (Mercedes pay,
coins, bank notes, cards)
= Details on parking tariMs
= Number of available parking spaces
= Payment method (e.g. at the parking
meter)
= Services/facilities at the parking option
= Telephone number 
Calculate the route (  pag
e 312). Notes on the dashcam
*
NOTE Obser
ve legal regulations and data
protection provisions You are legally responsible for operation and
use of t
he dashcam functions. MBUX multimedia system
315

The legal requirements relating to operation
and use of t he dashcam can vary depending
on the country in which the dashcam is oper-
ated.
This function is not permitted in all countries. 
Before using the dashcam, inform your-
self about t
he content of the legal regu-
lations, in particular the data protection
regulations in the respective country of
use. 
Observe the legal regulations, in particu-
lar t

he data protection regulations. Selecting a USB device for a video recording with
t
he dashcam Requirements:
= A

t least one USB device is connected with the
multimedia system .
Multimedia system: 4 © 5
Mercedes me & Apps
5 Dashcam 
Select the USB device. %
When USB devices contain multiple partitions,
r
ecorded video Nles are not always displayed
in the recording list.
Mercedes-Benz recommends that you use
USB devices with one partition. Starting or stopping video recording with the
dashcam Requirements:
= A USB de

vice is connected with the multime-
dia system .
= The vehicle is switched on.
Multimedia system: 4 © 5
Mercedes me & Apps
5 Dashcam 
If several USB devices are connected with the
multimedia sy

stem, select a USB device
( page 316). 
Select the Individual recording or Loop
recording r
ecording mode.
If Individual recording is selected and the
memory is full the recording stops. If Loop recording has been select

ed, several
short video Nles are recorded. When the mem-
ory limit is reached, the oldest video Nle is
deleted and recording is continued automati-
cally. 
To start: select Start recording.
The lengt
h of the recording is shown. The
Please do not remove the storage medium.
message appears. The video Nle is stored on
the USB device. 
To end: select End recording .
A report may appear in the following cases: = F

or the Individual recording recording mode:
the memory is full or there are only a few
minutes recording time available. The video
recording stops or will be stopped imminently.
Change the USB device or delete a video Nle.
= If a video recording has started and a national
border is detected, the National border
crossed. Please observe the countryspecific
regulations regarding video recording. mes-
sage appears.
This function is not available in all countries. 316
MBUX multimedia system

=
The camer a is not functional, the Camera
unavailable message appears.
Have the camera checked in a Mercedes-Benz
service centre. Telephone
Telephony
Notes on telephony
&
WARNING Risk of dis
traction from operat-
ing integrated communication equipment
while the vehicle is in motion
If you operate communication equipment inte-
g
rated in the vehicle when driving, you could
be distracted from the traPc situation. This
could also cause you to lose control of the
vehicle. 
Only operate this equipment when the
tr

aPc situation permits. 
If you cannot be sure of this, stop the
v
ehicle whilst paying attention to road and tr
aPc
conditions and operate the
equipment with the vehicle stationary. &
WARNING Risk of accident fr
om operating
mobile communication equipment while
the vehicle is in motion
Mobile communication devices distract the
dr
iver from the traPc situation. This can also
cause the driver to lose control of the vehicle. 
As a driver, only operate mobile commu-
nication de

vices when the vehicle is sta-
tionary. 
As a vehicle occupant, use mobile com-
munication de

vices only in the designa-
ted area, e.g. in the rear passenger com-
partment. You must observe the legal requirements for the
countr

y in which you are currently driving when
operating mobile communication equipment in
the vehicle. &
WARNING Risk of injur
y due to objects
being stowed incorrectly
If objects in the vehicle interior are stowed
incor
rectly, they can slide or be thrown around
and hit vehicle occupants. In addition, cup
holders, open stowage spaces and mobile
phone receptacles cannot always retain all
objects within.
There is a risk of injury, particularly in the
event of sudden braking or a sudden change
in direction. 
Always stow objects so that they cannot
be t
hrown around in such situations. 
Always make sure that objects do not
pr

otrude from stowage spaces, luggage
nets or stowage nets. 
Close the lockable stowage spaces
bef
ore starting a journey. 
Always stow and secure heavy, hard,
point
ed, sharp-edged, fragile or bulky
objects in the boot/load compartment. MBUX multimedia system
317