reset MERCEDES-BENZ C-Class 2003 W203 Comand Manual

199
Info Services/System settings
System settings
If the settings menu is displayed
Turn the right-hand rotary/push-button
v to highlight “Factory settings” and
press to confirm.
An inquiry menu will appear. “Yes” is
highlighted.
Accepting the factory settings

Press the right-hand rotary/push-
button v.
A screen with the factory setting will
appear for 8 seconds.
The main system settings menu is reac-
tivated.The factory settings are:


Acknowledgement beep – off


Info beep – off


Language – English (imp.)


Time display – 24 h


Date format –DD.MM (day, month)
If you do not wish to reset the factory
settings

Turn the right-hand rotary/push-button
v to highlight “No” and press to con-
firm.
The main system settings menu will ap-
pear.
Resetting all settings to the
factory settings
P82.85-7723-31

206 IndexDetour
calculating 164
Traffic jam ahead 164
Dialing
from calls list 94
Redial 91
Speed dialing 95
Subsequent dialing 84
Dialing operation 83
Distance bar 145
E
Emergency call 106
entering emergency call number 107
initiating 107
Ending a call
at the COMAND control unit 81
at the multifunctional steering
wheel 79
Enter
Unlock code 78Entering
House number 129
Intersection 128
Vehicle location 180
Error messages
CD operation 60
F
Factory settings
reset 199
Fault messages
during preparation of navigation
startup 122
G
GPS 114
GPS time 191
I
Important notes
Navigation 112
Telephone 68Incoming call 79
accepting at the COMAND control
unit 80
accepting at the multifunctional stee-
ring wheel 79
refusing a call 81
L
Language
selecting 189
Latitude 135
List
Country list 193
Route list
detailed route list 166
route list 165
Loading
CD drive with an audio CD 45
CDs in the changer 45
Longitude 135

208 Index
“DEST AREA” 145
“Destination memory is full” 175
“Error” 61
“Loading CD ...” 50
“Manual route exclusions have been
reset” 169
“Navigation cannot be activated. An er-
ror has occurred” 122
“NEW ROUTE” 145
“No CD available. Please insert NAVI-
CD type DX only” 122
“No CD changer” 60
“No CD” 60
“No magazine” 60
“NO ROUTE” 145
“No telephone” 69
“OFF ROAD” 145
“Personal service number” 108
“Reading error” 61
“Roadside Assistance” 108“SMS loading...” 103
“Telephone defective” 69
“Telephone is being activated. Please
wait.” 69
“Temperature is too high” 61
“The route list is being
calculated” 165
“Voice output is muted” 153
CALL 79
Mix 157
Multifunction display 11
CD operation 62
Radio operation 40
Telephone mode 71
Display overview 72
Muting 28
CD playback 60
N
Notebook 97O
Outgoing calls 82
P
Phone book 98
adding an entry 101
changing entries 98
deleting an entry 101
Phone number
begin dialing 83
correcting 83
interrupt dialing 83
Points of Interest
entering 137
Q
Quick reference
CD operation 42
Navigation 116
Radio operation 24
Quick reference COMAND 12

210 IndexSMS 103
deleting 105
Incoming SMS message 9
Sound 63
Setting Bass/Treble/Balance 65
Sound impressions 66
Sound-center
Balance 64
Fader 64
Speed dialing (only with COMAND) 95
Station
Radio station
Automatic station scan 33
Manual tuning 31
Seek tuning 30
selecting 30
Station selection via direct frequen-
cy entry 32
Station selection via number key-
pad (presets) 32Station frequency 28
Storing
in the phone book 102
Notebook input 97
Street list 127
Switch on
Radio operation 28
Switching another system on
CD mode 28
Radio operation 50
Switching off
Beeps 197
COMAND control unit 13
Mix 157
Telephone mode 79
Switching on
Auxiliary audio source 200
Beeps 197
CD operation 15, 50COMAND control unit 12
Mix 157
Navigation 122
Navigation system 17
Radio operation 14
Telephon operation 16
Telephone mode 78
Symbol display 144
T
Travelling abroad 114
V
Voice output
“Bear left after 250 feet” 155
“Please bear left” 155
“Please, make the next right
turn” 143
“Prepare to turn right” 154