phone MERCEDES-BENZ C-Class 2004 W203 Comand Manual

127 Telephone*
Service numbers

Turn the right-hand rotary/push-button
v to highlight “Change 1” in the
“Service No.” menu and press to con-
firm.
The “Change Service No. 1” menu will
appear.

Enter the new service number with
number keys 1 through 0.

Press the right-hand rotary/push-
button v to confirm the service num-
ber.
The new service number is now stored
in the “Service No.” menu.
Returning to the menu “Service No.”
The menu “Service No.” will appear auto-
matically after 7 seconds
or

Press *.
Changing personal service number
P82.85-9157-31
iPressing the right-hand rotary/push-
button v and inserting an empty input
line will delete the personal service
number.

128 Telephone*Service numbers
Turn the right-hand rotary/push-button
v to highlight “Change 2” in the
“Service No.” menu and press to con-
firm.
The “Change Service No. 2” country list
will appear.Select a new country service number from
the list

Turn the right-hand rotary/push-button
v to highlight the country abbreviati-
on you want and press to confirm.
The new service number is now stored
in the “Service No.” menu.
Returning to the menu “Service No.”
The menu “Service No.” will appear auto-
matically after 7 seconds
or

Press *.
Changing the number for Roadside
Assistance
P82.85-9158-31

171 Navigation
Route guidance
If an audio source is switched on, e.g. the
radio, the voice output will be mixed with
that of the audio source.
You can individually set the audio volume
differential between voice output/audio
source (
page 64). COMAND mutes navi-
gation voice outputs during telephone/
Tele Aid operation.
Repeating current voice output

Press the left-hand rotary/push-button
v briefly.
Muting current voice output

Press Ö briefly during a voice out-
put. You will hear the next announce-
ment normally.Switching the voice output off for the
duration of the current route guidance

Press Ö longer than 2 seconds du-
ring a voice output.
You will see the message “Voice output
is muted”.
Switching the voice output on again
The current route guidance has been com-
pleted.
Voice output will automatically switch on
again.
During a voice output

Press the left-hand rotary/push-button
v.Altering the voice output volume
At the COMAND control unit

Turn the left-hand rotary/push-button
v during a voice output.
COMAND will accept this setting for
following voice outputs.
At the multifunctional steering wheel
You can alter the volume with the steering
wheel keys during a voice output as well.
To raise the volume

Press J.
To lower the volume

Press I.

204Info Services*/System settingsInfo Services*
iIf information cannot be retrieved, one
of the following messages will be dis-
played:
“Data Connection Cannot be Estab-
lished”
Request has failed because Re-
sponse Center cannot be accessed.
Try again later.

“No Cellular Connection Available”
Vehicle may be in a cellular weak si-
gnal area. Try again later.

“Cellular System Busy”
Request has failed because cellular
system is busy. Try again later.

“Data transmission failure”
Request has failed because a data
transfer error has occured. Try again
later.
i
“Tele Aid Call in Progress”
Request has failed because SOS or
Roadside call is in progress.

“Tele Aid. Please visit workshop”
A hardware malfunction has been
detected. Contact your Mercedes-
Benz Center.

“To subscribe to information ser-
vices dial phone number”
You have not yet subscribed to ser-
vice.

“No information available at this ti-
me. Press SVC.”
No new information is available.
Warning
G
A driver’s attention to the road must always
be his/her primary focus when driving.
For your safety and the safety of others, we
recommend that you pull over to a safe loca-
tion and stop the vehicle before requesting
or receiving any info services.

218Info Services*/System settingsAuxiliary audio source

Auxiliary audio sourceThe auxiliary audio source (e.g. tape recor-
der) will be installed in the glove compart-
ment of your vehicle and connected to the
socket available for this purpose. You will
require a separate connecting cable for
this.COMAND will play back voice outputs du-
ring route guidance even if the auxiliary au-
dio source has been switched on.
It is possible to use the telephone while the
auxiliary audio source is in operation.
1Adjusts sound settings (
page 63)
ConnectingiMercedes-Benz recommends that any
auxiliary audio unit is installed and con-
nected by an authorized Mercedes-
Benz Center.
iRefer to the seperate operating instruc-
tions for information on how to operate
the auxiliary audio source (e.g. tape
player).
Switching auxiliary audio source on
P82.85-7724-31
1

221 Glossary
Audio source
This includes the systems radio and CD
(CD drive in the control unit and CD
changer) as well as an external source,
e.g. tape player.
COMAND
(Co
ckpit Man
agement and D
ata Sys-
tem)
Information and operating center for
vehicle sound and communications
systems, including the radio and CD
player, as well as for other optional
equipment (CD changer, telephone,
etc.).
Emergency call
This function places a call to a local
9-1-1 provider. It does not initiate a
->Tele Aid* call. Please note that the
9-1-1 emergency call system is a public
service. Using it without due cause is a
criminal offense.GPS
(G
lobal P
ositioning S
ystem)
Satellite-based system for relaying
geographic location information to and
from vehicles equipped with special re-
ceivers. Employs CD digital maps for
navigation.
Heading-up
The map is displayed facing driving di-
rection pointing up during route
guidance.
Info Services*
With this function you can request in-
formation on news, weather, stocks,
sports and reminders. Info Services is
an additional optional feature to basic
Tele Aid service. Tele Aid can be initial-
ly activated by completing a subscriber
agreement and placing an acquain-
tance call. Mix
Display representation during destina-
tion guidance. The symbol display is ac-
tivated automatically from the map
display before a turn-off. After you have
made the turn, the map will appear
again.
Multifunction display
Two displays in the combination instru-
ment that show important information
about the COMAND systems radio, CD
and telephone. The displays can be
called up using the control buttons on
the multifunction steering wheel.
Navigation CD
Contains all the destination addresses
(town, road, intersection, house num-
ber, special destinations) and the digi-
tal map material for a country or a
region for destination entry, route cal-
culation and destination guidance.

222 GlossaryNorth-up
The map is displayed facing due north
during route guidance.
Provider
is the network operator who makes
available (provides) telephone services
Roaming
For this function, the telephone uses
the telephone network of a contract
partner. There are home type and non
home type systems. The RM indicator
in the COMAND display indicates that a
call is being made using a non-home
type system.
Service numbers
includes a personal service number
and the number for Roadside Assis-
tance
Service source
This includes the systems telephone,
navigation (voice output during desti-
nation guidance) and ->Voice control
systemSMS
(S
hort M
essage S
ervice)
With this function you can receive, read
and delete short text messages (if SMS
service is provided by your carrier)
Tele Aid*
(Tele
matic A
larm I
dentification on D
e-
mand)
The Tele Aid system consists of three
types of response: automatic and ma-
nual emergency, Roadside Assistance,
and information. Tele Aid is initially ac-
tivated by completing a subscriber
agreement and placing an acquain-
tance call.
The Tele Aid system is operational pro-
vided that the vehicle's battery is char-
ged, properly connected, not damaged,
and cellular and GPS coverage is avai-
lable.Unlock code
Your unlock code prevents unauthori-
zed persons from using your telephone.
The unlock code is a number string,
which you have to enter on switching
on the telephone.
Voice output
During a trip, apart from visual informa-
tions (symbol or map displays),
COMAND also provides all of the
necessary spoken route information
via voice output.
Voice control system
One of the service sources of
COMAND.
As voice-operated control system, it
controls the COMAND systems via
voice. Refer to the separate operating
instructions.

224 IndexDetour
calculating 182
Traffic jam ahead 182
Dialing
from calls list 112
Redial 109
Speed dialing 113
Subsequent dialing 102
Dialing operation 101
Distance bar 163
E
Emergency call 124
entering emergency call number 125
initiating 125
Ending a call
at the COMAND control unit 99
at the multifunctional steering
wheel 97
Enter
Unlock code 96Entering
House number 147
Intersection 146
Vehicle location 198
Error messages
CD operation 60
F
Factory settings
reset 217
Fault messages
during preparation of navigation
startup 140
G
GPS 132
GPS time 209
I
Important notes
Navigation 130
Telephone 86Incoming call 97
accepting at the COMAND control
unit 98
accepting at the multifunctional stee-
ring wheel 97
refusing a call 99
L
Language
selecting 207
Latitude 153
List
Country list 211
Route list
detailed route list 184
route list 183
Loading
CD drive with an audio CD 45
CDs in the changer 46
Longitude 153

225 Index
M
Main menu structure 9
Map
altering the map scale 151
Compass needle 177
Heading-up 177
Map with cross hairs 150
moving the cross hairs 150
North arrow 177
North-up 177
Symbol for current vehicle
location 177
Memory functions
Radio operation 34
Menu
“City/Suburb” input menu 142
“Destination info” selection
menu 165
“Incoming calls memory” 112
“Phone book” 116
“Phone book” selection menu 105“Points of Interest” selection
menu 155
“Settings” 206
“Street” input menu 144
“Way point” 178
Category list 155
Main address menu 141
Main destination entry menu 140
Main destination memory menu 192
Main radio menu FM 28
Main system setting menu 202, 205
Phone book page (names) 106
Phone book pages (phone
numbers) 108
Ready for operation display
(Telephone) 96
SMS view 122
Traffic jam menu 182
Menu fields 9
Menu overview
CD operation 48Destination input 138
Radio operation 26
Telephone mode 94
Message
“Being activated” 61
“CALC. ROUTE” 163
“Caution. COMAND will shut down
now”. 10
“Caution. Please start engine. Otherwi-
se COMAND will shut down in 10
seconds” 10
“Caution. Please start engine. Otherwi-
se COMAND will shut down in 3
minutes” 10
“CD Magazine empty” 60
“CD-Reading error. Please use another
CD” 140
“Compiling sorted destination
list” 192, 197
“DEST AREA” 163
“Destination memory is full” 193

226 Index
“Error” 61
“Loading CD ...” 50
“Manual route exclusions have been
reset” 187
“Navigation cannot be activated. An er-
ror has occurred” 140
“NEW ROUTE” 163
“No CD available. Please insert NAVI-
CD type DX only” 140
“No CD changer” 60
“No CD” 60
“No magazine” 60
“NO ROUTE” 163
“No telephone” 87
“OFF ROAD” 163
“Personal service number” 126
“Reading error” 61
“Roadside Assistance” 126
“SMS loading...” 121
“Telephone defective” 87“Telephone is being activated. Please
wait.” 87
“Temperature is too high” 61
“The route list is being
calculated” 183
“Voice output is muted” 171
CALL 97
Mix 175
Multifunction display 11
CD operation 62
Radio operation 40
Telephone mode 89
Display overview 90
Muting 28, 75
CD playback 60
N
Notebook 115
O
Outgoing calls 100P
Phone book 116
adding an entry 119
changing entries 116
deleting an entry 119
Phone number
begin dialing 101
correcting 101
interrupt dialing 101
Points of Interest
entering 155
Q
Quick reference
CD operation 42
Navigation 134
Radio operation 24
Quick reference COMAND 12
R
Radio station
automatically saving 36