key MERCEDES-BENZ C-Class 2005 W203 Comand Manual

163 System settings
System settings

In the System settings menu, press the Display
soft key.You can use the following functions:

set the display dimming characteristics

adjust the display brightness
Setting the display dimming
characteristics

Push the joystick to G or g to
select an entry.Day modeThe display is continuously set to
daylight design.Night modeThe display is continuously set to night-
time design.AutomaticThe display changes depending on the
ambient light sensor in the vehicle.

Press E.
The setting is applied. The System
settings menu will appear.
Adjusting the display brightness

Press the
Bright.
soft key.

Push the joystick to H or h
direction to adjust the brightness.
Making display settingsOption
Symbol
Display mode selected
_
Display mode not
selected
-

164 System settingsSystem settingsor
Press the
Bright
. soft key longer than
2 seconds.
The display brightness changes
gradually. When the slider reaches the
end of the left or right border, it starts
moving into the opposite direction.

Release the
Bright.
soft key.
Confirming the setting

Press the
Back
soft key.
or

Press E.
The brightness setting is applied.

In the System settings menu, press the Reset
soft key.
The Reset inquiry menu will appear.
No

is highlighted.If you do not wish to reset to the factory
settings

Press the
Back
soft key or press E.
The System settings menu will appear.
Accepting the factory settings

Push the joystick to H or h
direction to select
Yes
.

Press E.
The message
All data has been
reset.
COMAND will now
restart. will appear.
Resetting all settings to the factory
settingsiAll your personal data, e.g. Last desti-
nation entries or Radio main menu pre-
set entries, will be deleted.
iThe factory settings are:
Time - Atlantic Time
Language - Instrument cluster
Verification tone - On
Notification tone - On
Display setting - Automatic

166 GlossaryPIN code
Your PIN code prevents unauthorized
persons from using your GSM mobile
phone. The PIN code is a number
string, which you have to enter when
switching on the telephone.
Provider
is the network operator who makes
available (provides) telephone services
Roaming
For this function, the telephone uses
the telephone network of a contract
partner. There are home type and non-
home type systems. The ROAMING
indicator in the COMAND display indi-
cates that a call is being made using a
non-home type system.
Service source
This includes the systems telephone*
and navigation (voice output during
destination guidance)SMS
(S
hort M
essage S
ervice)
With this function you can receive and
read short text messages (if SMS ser-
vice is provided by your provider)
Soft keys
Keys that activate different functions.
Function of key depends on the selec-
ted operating mode.
Tele Aid*
(Tele
matic A
larm I
dentification on D
e-
mand)
The Tele Aid system consists of three
types of response: automatic and ma-
nual emergency, roadside assistance,
and information. Tele Aid is initially
activated by completing a subscriber
agreement and placing an acquain-
tance call. Refer also to the vehicle
operating instructions.The Tele Aid system is operational pro-
vided that the vehicle’s battery is char-
ged, properly connected, not damaged,
and cellular and GPS coverage is avai-
lable.
Unlock code
Your unlock code prevents unauthori-
zed persons from using your telephone.
The unlock code is a number string,
which you have to enter when switch-
ing on the telephone, if you have locked
the phone before or the setting of the
phone lock is automatically.
Voice output
During a trip, apart from visual informa-
tions (symbol or map displays),
COMAND also provides all of the
necessary spoken route information
via voice output.

168 IndexDialing
subsequent dialing 82
Displaying
phone book 88
route list 122
E
Emergency call "911" 75
Emergency call system 155
Ending
call 80, 82
Entering
city 107
destination address 102
house number 103
parking 109
PIN-code 77
PUK 78
telephone number 81
the unlock code 77
F
Frequency range 35G
GPS 93
H
Hands-free microphone
switching on/off 86
I
Important notes
telephone* 70
Incoming call 80
Information 156
L
Loading
CD
into the COMAND 45
CDs
into the CD changer* 48
Loading/ejecting
navigation DVD 93
LOGIC7 Surround 31M
Making
a conference call 87
display settings 163
Map orientation
Heading Up 119
North Up 119
Memory
destination memory 135
last destinations 134
Memory functions
radio operation 40
Menu
functions 25
main area 24
soft keys area 24
status bar 24
Menu display 24
Menu system 24
Muting
CD operation 55
satellite radio* operation 62

170 IndexSaving
current location 128
destination 135
radio station 40
Selecting
an audio source 34
CD (CD changer* only) 51
city 109
cross street 106
detour 123
map orientation 119
satellite radio* station 63
street 103
time zone 160
Setting
display dimming characteristics 163
map view 130
POI Icons displays 129
routing mode 98
SIM-CARD BLOCKED 78
SMS 153Software Updates 147
Sound functions* 30
Speed-dialling 85
Starting
route guidance 115
Station
radio station
Station selection via number key-
pad (presets) 38
satellite radio* station
station selection via direct channel
entry 64
Subscribing
to satellite radio* 61
Subsequent dialing 82
Switching
the GPS info setting on/off 130
to CD operation 49
to telephone* operation 78
Switching off
COMAND 27
hands-free microphone 86
telephone operation 74Switching on
CD operation
CD changer* 50
CD drive in the COMAND 50
COMAND 27
hands-free microphone 86
satellite radio* operation 62
telephone operation 74
T
Tele Aid* 155
TELEPHONE BEING ACTIVATED, PLEASE
WAIT. 73
TELEPHONE BEING DEACTIVATED, PLEA-
SE WAIT 74
TELEPHONE NOT AVAILABLE 79
TELEPHONE NOT INSERTED 79
The unlock code
entering 77
Three-way calling 86
Traffic routes
minimizing 98
Trail settings 132
Treble 30