light MERCEDES-BENZ C-Class 2005 W203 Comand Manual

82 Telephone*Telephone operationBegin dialing
When you have entered the telephone
number
Press E.
or

Press k.
or

In the Telephone menu, press the
Send

soft key.Dialing will begin. If a name is associated
with the phone number saved in the phone
book, the name appears on the screen. In
the status bar, the off-hook symbol will ap-
pear.
COMAND will mute an active audio source.
If the person called answers the call, the
call is active. You talk over the hands-free
set.
The message
Call failed
may
appear if you place an outgoing call.
Try again later.
Subsequent dialing
Transmitting other dial tones:

During a call you can press the number
keys 1 through 0, # and *.
Ending a call

Press K.
or

Press the
End
soft key.Redial

Press k.
The telephone dials the number that
was dialed last.
or

Press the
Dialed#
soft key.
The Dialed numbers list will appear.
The most recently dialed number is
highlighted.

Press E.
or

Press k.
or

Press the Send soft key.

83 Telephone*
Telephone operation
Selecting an entry from the Received
calls list
The COMAND automatically generates a
list of the last 10 calls received. The list is
sorted chronologically with the most
recently received call at the top of the list.
Displaying the list
In the Telephone menu (
page 78),
press the
Recvd#
soft key.
The list is displayed and the most
recently received call is highlighted.
Received calls listThe status bar shows:
the caller’s name if her or his name and
number are stored in the phone book

the message
Unknown
if no entry is
available

the telephone number
You can select the following functions:

Changing the list display

Selecting an entry and begin dialing

Ending a call (
page 82)Changing the list display

Press the
123
soft key.
The display changes to numbers.
or

Press the
ABC
soft key.
The display changes to names.
Selecting an entry and begin dialing

Push the joystick to g or G to
select the desired entry.

Press E.
or

Press k.
or

Press the
Send
soft key.
The telephone dials the number.

84 Telephone*Telephone operationSelecting an entry from the Dialed num-
bers list
The COMAND automatically generates a
list of the last 10 numbers dialed. The list
is sorted chronologically with the most
recently dialed number at the top of the
list.
Displaying the list
In the Telephone menu (
page 78),
press the
Dialed#
soft key.
The list is displayed and the most
recently dialed number is highlighted.
Dialed numbers listThe status bar shows:
the caller’s name if her or his name and
number are stored in the phone book

the message
Unknown
if no entry is
available

the telephone numberYou can select the following functions:

Changing the list display (
page 83)

Selecting an entry and begin dialing
(page 83)

Ending a call (
page 82)
Toggling between lists

Push the joystick to H or h to
select the desired list.
Missed calls
If there are one or more missed calls avai-
lable on the mobile phone, a correspon-
ding message will appear.

Press the
Back
soft key or press E to
return to the Telephone menu.

88 Telephone*Telephone operationThe phone book contains all entries
of the internal memory of the mobile
phone (TDMA, CDMA and GSM mobile
phone), entries can marked with
symbols

of the SIM card (GSM mobile phone)
Displaying the phone book

In the Telephone menu (
page 78),
press the
Pho.Bk.
soft key.
The phone book will appear.The first entry found is at the top of the list
and highlighted. Entries marked with symbols have been
imported into the phone book from the in-
ternal memory of the mobile phone.
Usable phone number categories:

Symbol : Cell number

Symbol : Home number

Symbol : Work number
And additional categories:

Symbol : Fax number

Symbol : Pager number

Symbol : Main number
Phone book
Phone book
entry
Status bar shows
A phone number
Unknown
A name for a
phone number
The phone number
Several numbers
Several
Numbers

92 NavigationImportant notes

Important notesWarning
G
For safety reasons, you should only enter a
destination when the vehicle is stationary.
When the vehicle is in motion, a passenger
should enter the destination. Study manual
and select route before driving.
Do not watch display screen or operate but-
tons while the vehicle is in motion - let voice
instructions guide you. Stop at a safe locati-
on before using buttons or making correc-
tions.
Traffic regulations always have priority over
any route recommendations given.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car is co-
vering a distance of 44 feet (approximately
14 m) every second.
The route calculated by COMAND is a re-
commendation on how to best reach your
selected destination.
During route guidance, you will not receive
any information on
Traffic lights

Stop and yield signs

Parking or stopping zones

One-way streets

Narrow bridges

Similar traffic regulation data
You should therefore always strictly observe
traffic regulations while driving. Drive care-
fully and always obey traffic laws and road
signs even if they contradict COMAND in-
structions.
Warning
G
The Navigation DVD module contains a
Class 1 laser product. There is a danger of
invisible laser radiation if the cover is ope-
ned or damaged.
Do not remove the cover. The Navigation
DVD module does not contain any parts ser-
viceable by the user. For safety reasons,
have any necessary service work performed
by qualified personnel.
The display unit can cause injury if contac-
ted when open. Return the display unit after
inserting a Navigation DVD to its closed
position (
page 147).

102 NavigationDestination inputEntering a street
In the Enter street menu (
page 100)
push the joystick to h, H, g or
G to select the characters. After each
selection, press E.

Push the joystick to F or f to
select characters diagonally.
or

Press one of the number keys 1 to
9 and 0 to enter digits.

Press the
Delete
soft key if
necessary.
The character last entered by the
system is deleted.
Back to the previous menu

Press the
Back
soft key.
Confirming a street (menu)

Press E longer than 2 seconds.
or

Select the ( symbol. Push the
joystick to h, H, g or G to do
so.

Press E.
Entering destination addressiIf you enter the first character, the State
and
City
soft keys disappear.
The status bar shows the number of
current matches.
iFor quicker input, COMAND offers
available characters from the character
set based on your selections and the
names of the streets stored on the
navigation DVD. The character
selected appears magnified.
Greyed out characters are not available
and cannot be selected.
iIf there is only one match for the
entered street name, the ( symbol is
highlighted automatically.

104 NavigationDestination inputYou can use the following functions
entering the house number

selecting an intersection to that street
(page 106).

Press the appropriate number keys
0, 1 to 9.
or

Push the joystick to h, H, g or
G to select the numbers. After each
selection, press E.

Push the joystick to F or f to
select numbers diagonally.Confirming a house number

Press E longer than 2 seconds.
or

Select the ( symbol. Push the
joystick to h, H, g or G to do
so.

Press E.The Select city list (
page 105) will
appear.
or
The Start route guidance menu
(
page 115) will appear, if the entered
address information (street name and
house number) is unique in the
selected state or province.
or
The Ent er cit y menu will a ppear if more
than 7 cities share the entered address
information (street name and house
number).
iFor quicker input, COMAND offers
available numbers from the number
set based on your selections and the
house numbers stored on the
navigation DVD. The number
selected appears magnified.
Greyed out numbers are not available
and cannot be selected.
iEach option is possible as long as the
entered house number is available
from the information stored on the
DVD.
iIf there is only one match for the
entered house number, the ( symbol
is highlighted automatically.

108 NavigationDestination input
In the Enter city menu push the joystick
to h, H, g or G to select the
characters. After each selection, press
E.

Push the joystick to F or f to
select characters diagonally.
or

Press one of the number keys 1 to
9 and 0.

Press the
Delete
soft key if
necessary.
The character last entered is deleted.
Back to the previous menu

Press the
Back
soft key.
Confirming a city (menu)

Press E longer than 2 seconds.
or

Select the ( symbol. Push the
joystick to h, H, g or G to do
so.

Press E.
iIf you enter the first character, the
Map

and
State
soft keys and a city name
already available disappear.
The status bar shows the number of
current matches.
iFor quicker input, COMAND offers
available characters from the character
set based on your selections and the
names of the cities stored on the
navigation DVD. The character
selected appears magnified.
Greyed out characters are not available
and cannot be selected.
iIf there is only one match for the
entered city name, the ( symbol is
highlighted automatically.

110 NavigationDestination inputSelecting a parking lot
The map is displayed and shows the
destination and the available parkings lots.
One of the parking lot is spotlighted. The
name belonging to it is shown on the
status bar.
Use the
Next
or
Prev.
soft key to
select a parking lot on the map.

Press the
Details
soft key to see
more information about the parking lot.

Press E.
The Start route guidance menu will
appear (
page 115).

111 Navigation
Destination input
Selecting a destination using the map
Press c.

Push the joystick to H, h, g, G,
F, f.
or

Press the
Map
soft key, e.g. in the Start
route guidance menu (
page 115).
The map is shown in full view and
cross-hairs appear.
If soft key displays are hidden:

Press any soft key.
The soft key displays will appear.Available soft keys

POIs
soft key:
Spotlight a POI if POIs are on the map
(
page 141).

Memory
soft key:
Set a memory point and saved it in the
Last destinations memory (
page 99).

Display
soft key:
The Map view display will appear.
(
page 128).

Soft key +:
Enlarge visible map section.

Soft key ):
Reduce visible map section.
iThe system automatically places the
cross-hairs on the current destination
address.
ic was pressed:
If no soft key is selected within approx.
8 seconds, the soft key display will
disappear again.
iThe
POIs
, Memory
and
Display
soft
keys are available if the
Map
soft key
was pressed.