select a station MERCEDES-BENZ C-Class 2006 W203 Comand Manual

84 Satellite radio*
Satellite radio operation
You will see the Satellite radio main menu
automatically after 8 seconds
if you press s.Selecting a station on the memory list
In the Satellite radio main menu, press
the
Presets soft key.
The Satellite preset memory
(
page 83) will appear.
Push the joystick to gor G to high-
light a memory preset.
Press E.
The Satellite radio main menu will then
appear automatically after 8 seconds,
indicating the memory preset number
in the status line.
In the Satellite radio main menu, press
the
Info soft key.
The information display will appear.
You will see (if available)
the full station name
additional program information
Switching back to the Satellite radio main
menu
Press the Back soft key.
or
Press the Info soft key again.
i
An existing entry is overwritten in the
memory list when a new input is given.
If the message
Updating station
list
appears the presets may be over-
written.
Displaying information

94 Telephone*
Telephone operation
Initiating an emergency call
If Telephone is locked
Press the 911 soft key.
The system opens an inquiry menu
prompting if you want to dial a “911”
call.
The selection marker in the inquiry
menu should be on
Yes.
If necessary, push the joystick to
H to select
Yes.
Press E to confirm Yes if you want to
place the “911” emergency call.
The emergency call will be placed.
Wait until the emergency rescue
station answers and describe the
emergency.
If you do not want to place the emergency
call:
Push the joystick to h to select No
when the inquiry menu appears.
Press E to confirm No.
If Telephone is ready for operation
Press a repeatedly until the
Telephone menu is displayed.
Press 9, 1 and 1 one after the
other.
Press E.
or
Press the Send soft key.
or
Press k.
The emergency call will be placed.
Wait until the emergency rescue
station answers and describe the
emergency.

110 Navigation*
Important notes

Important notes
WarningG
For safety reasons, you should only enter a
destination when the vehicle is stationary.
When the vehicle is in motion, a passenger
should enter the destination. Study manual
and select route before driving.
Do not watch display screen or operate but-
tons while the vehicle is in motion - let voice
instructions guide you. Stop at a safe locati-
on before using buttons or making correc-
tions.
Traffic regulations always have priority over
any route recommendations given.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car is co-
vering a distance of 44 feet (approximately
14 m) every second.
The route calculated by COMAND is a re-
commendation on how to best reach your
selected destination.
During route guidance, you will not receive
any information on
Traffic lights
Stop and yield signs
Parking or stopping zones
One-way streets
Narrow bridges
Similar traffic regulation data
You should therefore always strictly observe
traffic regulations while driving. Drive care-
fully and always obey traffic laws and road
signs even if they contradict COMAND in-
structions.
WarningG
The Navigation DVD module contains a
Class 1 laser product. There is a danger of
invisible laser radiation if the cover is ope-
ned or damaged.
Do not remove the cover. The Navigation
DVD module does not contain any parts ser-
viceable by the user. For safety reasons,
have any necessary service work performed
by qualified personnel.
The display unit can cause injury if contac-
ted when open. Return the display unit after
inserting a Navigation DVD to its closed
position (
page 165).

115 Navigation*
Navigation main menu
Destination memory
You can select destinations from the
Destination Memory (page 154).
Enter destination
Activates the Enter street menu
(
page 118).
Last destinations
You can select last destinations from
the
Last destinations memory
(
page 152).
Points of interest:
Brings you to the
Select point
category
menu (page 156).
POIs are e.g. gas stations, parking
facilities or airports.
Phone number:
You can select a POI by phone number.
Brings you to the
Enter POI phone
number
menu (page 160).
Today’s Plan:
You can select destinations from the
Today’s Plan list one after the other or
sort destinations as Bestway or Round
trip (
page 162).Available soft keys
Home soft key:
You can edit the home address and
start route guidance (
page 131).
Mode soft key:
You can edit the routing mode for the
next route guidance (
page 116).

143 Navigation*
During route guidance
This function allows you to select an
intermediate destination while route
guidance is active. A stopover destination
may be a gas station or a restaurant or any
other place. When the route to the
stopover destination is calculated, the
system calculates the route from the
stopover destination to the main
destination.
Entering a stopover destination
Activate the soft key display
(
page 139).
Press the Stopovr soft key.
The map is displayed in full view.
or
The Stopover still active menu will
appear (
page 145) if a stopover
already exists.Available soft keys
After pressing a softkey on the left side, a
corresponding list (
page 144) or, if a POI
is close by, the map will appear with one
POI spotlighted (
page 159).
 soft key:
Shows a list of Mercedes-Benz Centers
near your location.
 soft key:
Shows a list of filling stations or the
map with one filling station spotlighted.
 soft key:
Shows a list of parking facilities or the
map with one parking facility
spotlighted.
 soft key:
Shows a list of restaurants or the map
with one restaurant highlighted.
 soft key:
Shows a list of hospitals or the map
with one hospital spotlighted.
If you press this soft key the following
warning message will appear:
Stopover function

156 Navigation*
POIs (Points of Interest)

POIs (Points of Interest)
This function allows you to select Points of
Interest such as gas stations, parking
facilities or shopping centers.
Activating the Navigation main menu
(
page 114).
Push the joystick to G t o s e l e c t m e n u
item
Points of interest.
Press E.
The Select POI category menu will
appear.Selecting a POI category
Select POI category menu
i
You can also select a POI
in the Start route guidance menu
(
page 127) or during route
guidance (
page 139)
on the map (page 159)
by entering a phone number
(
page 160).
Entering POIs

181 System settings
System settings
In this display example, the help screen
is activated.
Push the joystick to G or g to
select an entry.
Press E.
This will activate or deactivate the help
screen.
Voice control individualization
The individualization function is used to
adapt the voice control to your own voice
and to therefore improve speech
recognition. This does not affect speech
recognition of other users.
Individualization consists of two stages.
The first stage involves training digits,
while the second stage trains specific
commands.
Open the System settings menu
(
page 176).
Press the VC Tips soft key.
The Voice control menu will appear.
Push the joystick to G to select the
Individualization menu item.
Press E.
The Individualization menu will appear.Starting individualization
Push the joystick to g to select menu
item
Start new
individualization
.
Press E.
The individualization process starts.
The system now guides you through
the individualization process using a
dialog, all operations are voice inputs.
i
You can only activate the individualiza-
tion function when the car is station-
ary. If the car is moving, the following
message will appear:
Individualization only
possible when car is
stationary
.

192 Index
P
Phone book 106
PHONE NOT AVAILABLE 91
PHONE NOT INSERTED 91
PHONE OFF 92
PIN BLOCKED. PLEASE ENTER PUK ON
CELL PHONE 96
PIN-code
entering 95
PIN-CODE INCORRECT 96
PLEASE ENTER LOCK-CODE 90
PLEASE INSERT SIM CARD (EMERGENCY
CALL 911 ONLY POSSIBLE WITH
PHONE) 91, 92, 95
Points of Interest 156
Program category 81
PUK
entering 96
Q
Quick-dialing 103R
Radio operation
muting 40
Radio station
saving station manually 46
Reading
SMS message received 172
Recalculating 133
Redial 100
Rejecting
call 98
Resetting
all settings to the factory
settings 183
Roadside Assistance 173
ROAMING 97
Route calculation 133
Route guidance 133S
Satellite radio*
important notes 78
memory functions 83
Satellite radio* operation
automatic tuning 81
Saving
current location 146
destination 153
radio station 46
Selecting
an audio source 40
CD (CD changer* only) 57
city 127
cross street 124
detour 141
folder (MP3-CD) 70
map orientation 137
satellite radio* station 81
street 121

193 Index
time zone 176
via folder list 70
Voice control* settings 180
Setting
display dimming characteristics 179
map view 148
POI Icons displays 147
routing mode 116
SIM-CARD BLOCKED 96
SMS 171
Software Updates 165
Sound functions* 37
Speed-dialling 103
Starting
route guidance 133
Station
satellite radio* station
station selection via direct channel
entry 82Subscribing
to satellite radio* 79
Subsequent dialing 100
Switching
the GPS info setting on/off 148
to CD operation 55
to MP3 CD operation 68
to telephone* operation 96
Switching off
COMAND 34
hands-free microphone 104
telephone operation 92
Switching on
CD operation
CD changer* 56
CD drive in the COMAND 56
COMAND 34
hands-free microphone 104
satellite radio* operation 80
telephone operation 92T
Tele Aid* 173
TELEPHONE BEING ACTIVATED, PLEASE
WAIT. 91
TELEPHONE BEING DEACTIVATED, PLEA-
SE WAIT 92
TELEPHONE NOT AVAILABLE 97
TELEPHONE NOT INSERTED 97
The unlock code
entering 95
Three-way calling 104
Today’s plan 162
Traffic routes
minimizing 116
Trail settings 150
Treble 37