key MERCEDES-BENZ C-Class 2008 W204 Comand Manual

102 Telephone
Making calls
To select call: Rotate ymz or slide
qmr.
To initiate call: Press n.
Initiating a call to a call list entry or
COMAND phone book entry
Open the call list and select an entry
(
page 97).
or
Open the COMAND phone book and
select an entry (
page 104).
To initiate call: Press n.Phone mode with a single call
1Other party
2Symbol for active phone connection
3Switches the hands-free microphone
off or on
4Sends DTMF tones (not possible with
all mobile phones)
5Device name of the connected mobile
phone
6Terminates callSwitching hands-free microphone on or
off
Open the phone main menu
(
page 92).
To switch off: Select “Mic Off”.
When the microphone is switched off
the symbol > appears in the main ar-
ea.
To switch on: Select “Mic On”.
The symbol > disappears
Sending DTMF tones
i This function is not possible with all mobile
phones.
Answering machines or other devices can
be controlled via DTMF tones, e. g. for re-
mote query functions.
To transmit individual characters:
During a call select the required char-
acters using the COMAND controller.
or
Press the corresponding button on the
COMAND control unit keypad.
Every selected character is transmitted
immediately.
Functions during a single call

179 Voice Control
Phone operation
You can use voice control to:

place a call by using your voice to input
a phone number

store names and numbers in the ad-
dress book

dial a number from the address book

listen to the phone book

retrieve and manage your voice mail
and recorded announcement services

redial
Voice control recognizes whether:

your phone is switched on

your phone is connected via Bluetooth

the car phone is registered with the rel-
evant mobile phone network

it is possible to dial

the PIN has been entered
If it is not possible to dial, voice control is-
sues a message to this effect.
i You can still operate your phone using the
keypad.
Phone operation
G Warning
Some jurisdictions prohibit the driver from
using a cellular telephone while driving.
Whether or not prohibited by law, for safety
reasons, the driver should not use the cellu-
lar telephone while the vehicle is in motion.
Stop the vehicle in a safe location before
placing or answering a call.
If you nonetheless choose to use the mobile
phone while driving, please use the hands-
free feature and be sure to pay attention to
the traffic situation at all times. Use the mo-
bile phone only when road, weather and traf-
fic conditions permit. Otherwise, you may
not be able to observe traffic conditions and
could endanger yourself and others.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.
G Warning
Never operate radio transmitters equipped
with a built-in or attached antenna (i.e. with-
out being connected to an external antenna)
from inside the vehicle while the engine is
running. Doing so could lead to a malfunc-
tion of the vehicle’s electronic system, pos-
sibly resulting in an accident and/or
personal injury.
Operation

180 Voice Control
Phone operation
“Phone”
Use the “Phone” command to select the
phone application. Use this command if
you wish the digits entered to be shown on
the display.
“Help Phone”
Voice control has an extensive help func-
tion. Using the “Help Phone” command,
you can have all the essential commands
for the phone read out (
page 201).
“Enter PIN”
Use the “Enter PIN” command to input the
PIN code (Personal Identification Number)
for your phone. To do this, the phone must
be connected via Bluetooth. When you
have given the command, voice control
prompts you to enter the PIN code.
Say the PIN code in the form of a continu-
ous string of digits or as blocks of digits,
e.g. three to five digits.
Digits 0 to 9 are permitted. Voice control
repeats the digits it recognizes after each
block of digits (with a pause of approxi-mately half a second between each block
of digits) and waits for you to continue
speaking.
Example of dialog:
sEnter PIN
tPlease say the PIN code
sZero one three three
tZero one three three
sOkay
! The card is blocked if you enter the wrong
code three times in a row. Use the PUK (personal
unblocking key) to unblock the card.
You can only enter the unblocking code via
the phone keypad – see the phone operat-
ing instructions.
“Dial number”
You can use the “Dial number” command
to dial a phone number.
The digits 0 - 9 and the word “Plus” are per-
mitted.
“Plus” replaces the international dialing
code, e.g. “00”.
Say the phone number in the form of a con-
tinuous string of digits or as blocks of dig-
its, e.g. three to five digits.Voice control repeats the digits it recogniz-
es after each block of digits (with a pause
of about half a second between each block
of digits) and waits for you to continue
speaking.
Example of dialog:
sDial number
tPlease say the number
sZero one three zero
tZero one three three
sFive zero zero five
tFive zero zero five
sOkay
tDialing number.
i You can also dial the specified number if you
press the s button on the multi-function
steering wheel instead of the concluding com-
mand “Okay”.
Commands