Screen MERCEDES-BENZ C-Class 2008 W204 Comand Manual

167 System settings
System settings
Switching help screen on/off

Select “System” K “System Settings”
K “Voice Control”.

Select “Help Window”.
This switches the help screen on D or
off C.
i In addition to the audible instructions, the
help screen displays other information during
the individualization process and the later voice
control mode.
Individualization function
You can use the individualization function
option to adapt the Voice control system
to your own voice and therefore improve
voice recognition. This will affect the ability
of the system to recognize the voices of
other users, and for this reason it can be
switched off (
page 168).
The individualization function comprises
two parts and lasts around 5 minutes. Dur-
ing the process you will practice a few
number sequences and voice commands.
Starting new individualization process
i You can only start the individualization func-
tion when the vehicle is stationary. First switch
off all interfering units/functions, such as radio
or navigation. After starting, the system will take
you through the training by means of audible in-
structions.

Select “System” K “System Settings”
K “Voice Control” K “Start New Indi-
vidualization”.
You will be visually and audibly prompt-
ed to confirm whether you would like
additional information.

Select “Yes” or “No”.If you select “No”, the first part of the
individualization will start. You will be
prompted to confirm that you wish to
practice numbers or voice commands.
If you select “Yes”, an information
screen will appear and you will hear in-
formation about the sequence of the in-
dividualization process. The first part of
the individualization then starts auto-
matically
or

To close display: Press n.
You will be prompted to confirm
that you wish to practice numbers
or voice commands.
Voice control settings


170 System settings
System settings
i If the device list already contains ten autho-
rized devices, you will have to withdraw the au-
thorization for (de-authorize) one of the
authorized devices. You will then have to switch
this device off and start the search again. Other-
wise the new device you are looking for will not
appear in the list.
i If you reopen the device list at a later time,
this will contain all previously authorized devic-
es.
Displaying details on a Bluetooth®
device

Open the Bluetooth® device list
(
page 169).

Select the desired device.

Select “Options” K “Details”.
The details screen for the device is dis-
played.

To close details screen: Rotate ymz
or slide qmr.
Authorizing a Bluetooth® device

Open the Bluetooth® device list
(
page 169).

Select “Update”.
i If the authorization of a device, which had
been authorized in the past, has been withdrawn
and it is no longer found in the search, the device
list no longer includes this device.
Devices that have been authorized in the past
but not found in the search are either not
switched on or are not in the vehicle.

Select the as yet unauthorized device
(no check mark yet).

Select “Options” K “Authorize”.
The input menu for the passcode ap-
pears.
i The passcode is any number with between
one and sixteen digits that you can select your-
self. You must enter the same number on CO-
MAND and on the device to be authorized.
Please also refer to the instructions in the mobile
phone’s manual.

To enter passcode on COMAND:
Select digits one after another.

To cancel entry on COMAND: Select
“Back”.

To confirm entry on COMAND: Select
B:

Enter the same passcode on the Blue-
tooth® device (operating manual for
the relevant device).
The device is authorized.
De-authorizing a Bluetooth® device

Open the Bluetooth® device list
(
page 169).

Select the authorized device.

Select “Options” K “De-Authorize”.
You will be asked whether the device
should really be de-authorized.

Select “Yes” or “No”.
After selecting “Yes”, the authorization
of the device is withdrawn.

213 Technical terminology
AAC
(A
dvanced Audio Coding)
A means of compressing audio data
which is subject to losses. Based on
the MPEG2 standard.
Bit
(Bi
nary digit)
The smallest unit of digital information.
Bit rate
Measurement of transmission speed.
Indicates the number of ->bits trans-
mitted per unit time.
Bluetooth
®
Wireless personal area networks that
provide a way to connect and exchange
information between devices such as
mobile phones, laptops, PCs, etc. over
a short-range radio frequency.
CD
(C
ompact Disc)
Digital storage medium in disc format.
CD-R
(CD
Recordable)
Writeable ->CD-ROM.
CD-RW
(CD
Rewriteable)
CD which can be read, written and de-
leted.CD text
CD text is an extension of an audio CD,
which contains text information such
as title, artist and name of the individu-
al pieces of music.
->COMAND displays
this information on the corresponding
screens if the selected audio CD con-
tains this information.
COMAND control system
(Co
ckpit Management and Data
System)
Central information and operating unit
for various vehicle functions, such as
radio, DVD changer and other equip-
ment, such as telephone, navigation
system.
Dolby Digital
Optional format for audio data on an
DVD audio or DVD video.
DTMF
(D
ual Tone Multi-Frequency)
DTMF tones control answering machi-
nes or other devices, e. g. for remote
queries.
DTS
(D
igital Theater Sound)
Optional format for audio data on an
DVD audio or DVD video.DVD
(D
igital Versatile Disc)
Digital storage medium in disc format
for storing large data volumes, e.g.
films.
DVD+R
(DVD
Recordable)
->DVD which can be read and written
but not deleted.
DVD+RW
(DVD
Rewriteable)
->DVD which can be read, written and
deleted.
DVD-R
(DVD
Recordable)
->DVD which can be read and written
but not deleted.
DVD-RW
(DVD
Rewriteable)
->DVD which can be read, written and
deleted.
Geo-coordinates
Indicate the geographical position of a
location on the earth's surface.