light MERCEDES-BENZ C-Class 2008 W204 Comand Manual

94 Telephone
COMAND phone book
Displaying details on an entry
COMAND can also fully display an abbrevi-
ated entry.
Select entry.
Select “Options” K “Details”.
The details screen appears.
To close details screen: Slide omp
repeatedly until the entry is highlighted
again.
Select entry (page 93).
Press n.
or
Press thew button on the COMAND
control unit.
If the entry contains subentries, a list
appears.
Select the desired subentry.
Press n again.
or
Press thew button on the
COMAND control unit.
i When a new entry is added through the
COMAND phone book, it is saved to the address
book.
Select “Options” K “New Entry” in the
COMAND phone book.
Select a number category, e. g.
“Home”.
Select a phone category, e. g.
“Mobile Phone”.
Select “Save”.
The input menu with the data fields ap-
pears.
1Cursor
2Data field
3Predictive speller
4Selected phone category
Switching data field
Slide mq until the predictive speller is
not highlighted.
Then slide qmr to select desired field
and press n.
or
Select [ or ] in the speller.
The input menu indicates the selected
data field.
Initiating call to an entry
Creating a new entry

95 Telephone
COMAND phone book
Entering data into a field
Select all the characters one after the
other in the predictive speller 3.
i The predictive speller provides the charac-
ters corresponding to the selected data field.
To switch predictive speller to up-
per or lower case characters: Select
( or &.
To switch predictive speller charac-
ter set: Select #.
Every time this is selected it switches
the character set.
To change the predictive speller lan-
guage: Select !.
Rotate ymz or slide qmr until the re-
quired language is highlighted and
press n.
To move the cursor in the data field:
Select Y or Z.
Deleting an entry
To delete an individual character:
Select õ and briefly press n.
or
Press the î button next to the
COMAND controller.The character to the left of the cursor is
deleted.
To delete an entire entry: Select
õ and press and hold n until the
entire entry has been deleted.
or
Press and hold î until the entire en-
try has been deleted.
Cancelling an entry
Select A.
If one of the data fields contains data,
you will be prompted to confirm wheth-
er you wish to save the entry.
Select “Yes” or “No”.
The entry will be saved or discarded
on the basis of the selection.
Saving entry
Select B
A corresponding message is displayed.The deletion rules vary according to the en-
try selected:

Phone book entry selected:
The entry is deleted in the COMAND
phone book and the address book if the
address book entry only contains
phone numbers.

Entire address book entry selected:
The entry is deleted in the COMAND
phone book and additionally also in the
address book if the address book entry
only contains phone numbers.

Subentry of an address book entry se-
lected:
The subentry is deleted in the
COMAND phone book and in the ad-
dress book.
To delete: Select entry (page 104).
Select “Options” K “Delete”.
You will be prompted to confirm that
you really want to delete the entry.
Select “Yes” or “No”.
“Yes” option: The entry is deleted ac-
cording to the above rules.
Deleting entry

97 Telephone
Call lists
COMAND displays the calls received (in-
cluding missed calls) or made during
phone mode in their own lists.
i The particular menu item can only be select-
ed if calls have already been received or made
from COMAND.
The display of missed calls in the COMAND dis-
play is not possible with all mobile phones.
i The instrument cluster control system
displays a list of the last dialed calls.
i For many operating functions you can also
use the buttons on the multifunction steering
wheel, e.g. the (, &, $, %,
#,
s
or t buttons, for selecting a track or a
menu, scrolling through lists or initiating or end-
ing a call (
page 23).
Calling up the list
In the phone main menu select “Call
Lists”.
Select “Calls Received” or “Calls Di-
aled”.
The appropriate list appears.
or
In the phone main menu
press
w.A list of the last dialed calls appears.
List of incoming calls
1List of calls received
2Date/time of the highlighted entry
3List entry options menu
i If there is a symbol in front of the phone
number or the name, then you have missed this
call.
To select a list entry: Rotate ymz or
slide qmr.
i You can call the selected list entry
(
page 102).
To close list: Select “Back”.
Displaying details on a list entry
COMAND can also fully display an abbrevi-
ated list entry.
Select the list entry.
Select “Options” K “Details”.
The details screen appears.
Back to the list: Slide omp repeatedly
until the list is highlighted.
Call lists

98 Telephone
Call lists
Saving unsaved list entry
Unsaved list entries are displayed by
means of the phone numbers.
Saved list entries are displayed as the
name. They are either saved in the address
book or in the COMAND phone book.
Saving in the address book as a new
entry
Select the list entry.
Select “Options” K“Save”K “New
Entry”.
i “Save” has no function if the selected list
entry has already been saved to the address
book.
Select a number category, e. g.
“Home”.
Select a phone category, e. g.
“Mobile Phone”.
Select “Save”.
An input menu with data fields will ap-
pear. The data field for the phone num-
ber is completed automatically. The
data field for the last name is also com-
pleted if the entry to be saved contains
a name.1Cursor
2Data field
3Speller
4Data field for phone number is com-
pleted automatically
5Phone category
6Number category
To switch data field: Slide qm until
the last name line is highlighted.
Press n.
or
Select [ or ] and press n.
The selected data field is highlighted.
To enter data into a field: Select all
the characters one after the other in
the speller 3.
Number categoryDisplay
(phone and ad-
dress book)
“Not Classified” G
“Home”k
“Work”l
Phone category
“Not Classified”G
“Mobile Phone”O
“Car”n
“Pager”<

99 Telephone
Call lists
i The speller provides the characters corre-
sponding to the selected data field.
To switch predictive speller to up-
per or lower case characters: Select
( or &.
To switch predictive speller charac-
ter set: Select #.
Every time this is selected it switches
the character set (digits, lower case let-
ters).
To change the predictive speller lan-
guage: Select !.
Rotate ymz or slide qmr until the re-
quired language is highlighted and
press n.
To move the cursor in the data field:
Select Y or Z.
To delete an individual character:
Select õ and briefly press n.
or
Press the î button next to the
COMAND controller.
The character to the left of the cursor is
deleted.
To delete an entire entry: Select
õ and press and hold n until the
entire entry has been deleted.
or
Press and hold î next to the
COMAND controller until the entry has
been deleted.
To save entry: Select B
A corresponding message is displayed.
To cancel entry: Select “Back”.
If one of the data fields contains data,
you will be prompted to confirm wheth-
er you wish to save the entry.
Select “Yes” or “No”.
The entry will be saved or discarded
on the basis of the selection.Adding a phone number from the call list
to an existing address book entry
Select the list entry (page 97).
Select “Options” K “Save”K“Add
Phone No.”.
i “Save” has no function if the selected list
entry is already saved in the address book.
Select a number category, e. g.
“Home”.
Select a phone category, e. g.
“Mobile Phone”.
Select “Save”.
The search menu for address book en-
tries appears.
Search for the required entry.
i Please see the “Searching for an address
book entry” section (
page 106) for a detailed
description on searching for an address book en-
try.
Press n after completing the search.
If there are fewer than five numbers
saved for the required entry in the se-
lected number category, COMAND
saves the data.
A corresponding message is displayed.

105 Telephone
Address book
i You can create address data directly in the
address book. If you save phone numbers in the
COMAND phone book, these are saved in the ad-
dress book. When you save a navigation destina-
tion, COMAND creates an address book entry
containing the complete address data that sup-
port navigation.
Open the address book (page 104)
and select “New”.
The input menu with the data fields and
the speller appears.
Input menu with data fields
1Selected data field with cursor
2Speller
Switching data field
Slide qm repeatedly until the predic-
tive speller is hidden.
Then slideqmr and press n to select
a data field.
or
Select [ or ] in the speller.
The input menu indicates the selected
data field.
Entering data into a field
Select all the characters one after the
other in the predictive speller 2.
i The predictive speller provides the charac-
ters corresponding to the selected data field.
To switch predictive speller to up-
per or lower case characters: Select
( or &.
To switch predictive speller charac-
ter set: Select #.
Every time this is selected it switches
the character set.
To change the predictive speller lan-
guage: Select !.
Rotate ymz or slide qmr until the re-
quired language is highlighted and
press n.
To move the cursor in the data field:
Select Y or Z.
Deleting
To delete an individual character:
Select õ and briefly press n.
or
Press î button next to the
COMAND controller.
The character to the left of the cursor is
deleted.
To delete an entire entry: Select
õ and press and hold n until the
entire entry has been deleted.
or
Press and hold î until the entire en-
try has been deleted.
Creating a new address book entry

107 Telephone
Address book
Searching
Searching via search speller
Switch if necessary from the list to the
search speller.
To change the search speller lan-
guage: Select !.
To switch search speller character
set: Select #.
Depending on the previous setting, this
switches it to letters with special char-
acters or numbers with special charac-
ters.
To enter characters: Select the char-
acters for the required entry one after
another.
To delete an individual character:
Select õ and briefly press n.
or
Press the î button next to the
COMAND controller.
After entering each character or after
each deletion of a character, the clos-
est matching entry is given at the top of
the list.
To delete an entire entry: Select
õ and press and hold n until the
entire entry has been deleted.
or
Press and hold î until the entire en-
try has been deleted.
To end search: Switch from the search
speller to the list.
The top list entry is highlighted auto-
matically.
Back to the address book: Switch if
necessary from the list to the search
speller and in the search speller select
A.
Searching via list
If necessary, switch from the search
speller to the list (
page 106).
Rotate ymz for so long or slide qmr
until the desired entry in the list is high-
lighted.
Search for the required entry
(
page 106).
Select “Options” K “Delete”.
A delete prompt appears.
Select “Yes” or “No”.
The entry will be deleted or retained on
the basis of the selection.
Switch from the search speller to the
list (
page 106).
or
Select an address book entry in the ad-
dress book (
page 104).
Press n.
The details screen appears.
Deleting entry
Displaying details for an address
book entry

108 Telephone
Address book
Details screen for private data
1Back to the previous menu
2Selected data field
3k symbol for private data
4Calls up options
5l symbol for business data
Selecting another data field
Rotate ymz or slide qmr.
Displaying abbreviated content in full
Select “Options” K “Details”.
The complete display appears.
To close complete display: Slide
omp or press n.
Closing details screen
Select “Back”.
Changing an address book entry
Search for an address book entry
(
page 106).
Select “Options” K “Change Entry”.
or
Display details for an address book en-
try.
Select “Options” K “Change Entry”.
The input menu with the data fields ap-
pears.
Continue from the step “Switching data
field” in the “Creating a new address
book entry” section (
page 105).
Changing category of a
phone number data field
Display the details for an entry and
highlight the phone number data field
(
page 107).
Select “Options” K “Change Catego-
ry”.
Select a number category, e. g.
“Home”.
Select a phone category, e. g.
“Mobile Phone”.
If necessary select “Preferred”.
Depending on the previous status, the
option will be switched on D or off C.
The phone number is displayed in the
phone book as the first number and
can be dialed immediately.
Select “Save”.
The new category is saved.
Changing entry

109 Telephone
Address book
i The mobile phone must be connected via
the Bluetooth® interface.
Display the details for an entry and
highlight the phone number data field
(
page 107).
Press n.
The phone initiates the call. The display
switches to the phone mode display.
or
Select “Options” K “Call”.
The phone initiates the call.
i You can use this function as soon as you
have saved a destination in the destination mem-
ory (
page 159). COMAND then also saves the
destination in the address book with the com-
plete address data that support navigation.
Search for an address book entry with
the Q symbol (
page 106).
Display the details for an entry and
highlight the address data field
(
page 107).
Press n.
i Pressing n only functions if the address
data field contains complete data that support
navigation. This is indicated by the Q symbol.
or
Select “Options” K “Navigate”.
i “Navigate” can only be selected if the ad-
dress data field contains complete data that sup-
port navigation. This is indicated by the Q
symbol.
1Address that supports navigation
2Opens Enter Destination menu
The Enter Destination menu appears,
the selector bar is located at the menu
item “Start” (
page 135).
Start the route calculation.
Initiating a phone call to an entryStarting navigation to an entry

112 Navigation
Introduction
The digital data for the map software will
become obsolete, just like conventional
road maps. Optimum route guidance by
the navigation system is only achieved
with up-to-date map software. Information
on new map software versions is available
from an authorized Mercedes-Benz Center.
You can have the map software updated
there by means of a DVD or perform the
update process yourself.
Notes on DVD discs

Only touch the discs at the edges.

Handle the discs with care in order to
prevent reading errors.

Avoid scratching, leaving fingerprints
and dust on the discs.

Use a commercially available cleaning
cloth to clean discs. Always wipe in a
straight line from the inside outwards,
never in a circular motion.

After use, put the discs back into the
box.

Protect the discs from heat and direct
sunlight.
Introduction
Safety instructions
G Warning
For safety reasons, only enter a destination
when the vehicle is stationary. When the ve-
hicle is in motion, a passenger should enter
the destination. Study manual and select
route before driving.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.
COMAND calculates the route to the desti-
nation without taking account of the follow-
ing:

Traffic lights

Stop and right-of-way signs

Lane merging

Parking or stopping prohibited areas

Other road and traffic rules and regula-
tions

Narrow bridges
G Warning
COMAND may give incorrect navigation
commands if the data in the digital map
does not correspond with the actual road/
traffic situation. Digital maps do not cover
all areas nor all routes within an area. For ex-
ample, if the traffic routing has been
changed or the direction of a one-way road
has been reversed.
For this reason, you must always observe
applicable road and traffic rules and regula-
tions during your journey. Road and traffic
rules and regulations always have priority
over the navigation commands generated by
the system.
G Warning
Navigation announcements are intended to
direct you while driving without diverting
your attention from the road and driving.
Please always use this feature instead of
consulting the map display for directions.
Consulting the symbols or map display for
directions may cause you to divert your at-
tention from driving and increase your risk
of an accident.
Updating the map software