MERCEDES-BENZ C-CLASS SALOON 2022 Owners Manual

Page 461 of 585

Display messages
Possible causes/consequences and P Solutions
:
Switch on headlamps * You are driving without low-beam headlamps. 
Turn the light switch to the L or X position.
:
Switch off lights * You are leaving the vehicle and the lights are still switched on. 
Turn the light switch to the X position.
DIGITAL LIGHT Functions
limited * The DIGITAL LIGHT system is malfunctioning. The lighting system will continue to work even without the functions of
the DIGITAL LIGHT system. 
Consult a q
ualiNed specialist workshop.
Check low beam setting
(left/right-side traffic) * The type of tr

aPc has been selected manually. 
Check the setting and change it manually if necessary (  pag
e 146).
Low beam setting (left/
right-side traffic) Manual
adjustment only * The automatic headlamp conversion for
les-hand/r
ight-hand traPc has malfunctioned. 
Change the headlamps over manually (  pag
e 146).458
Display messages and warning/indicator lamps

Page 462 of 585

Display messages
Possible causes/consequences and P Solutions
Adaptive Highbeam Assist
currently unavailable See
Owner's Manual * Adaptive Highbeam Assist is temporarily unavailable.
The sy stem limits have been reached (  page 143).
Once the cause of the problem is no longer present, the system will be available again. The Adaptive Highbeam
Assist available again display message will appear. 
Drive on 
Operate the high beam manually until Adaptive High Beam Assist is available again.
Adaptive Highbeam Assist
inoperative * Adaptive Highbeam Assist is malfunctioning. 
Drive on
or 
Stop the vehicle in accordance with the tr
aPc conditions and restart the vehicle. 
If the display message does not disappear: consult a q ualiNed specialist workshop. 
Until then, operate the high beam manually.
Adaptive Highbeam Assist
Plus currently unavailable
See Owner's Manual * Adaptive Highbeam Assist Plus is temporarily unavailable.
The sy
stem limits have been reached (  page 144).
Once the cause of the problem is no longer present, the system will be available again. The Adaptive Highbeam
Assist Plus available again display message will appear. 
Drive on 
Operate the high beam manually until Adaptive High Beam Assist Plus is available again. Display messages and warning/indicator lamps
459

Page 463 of 585

Display messages
Possible causes/consequences and P Solutions
Adaptive Highbeam Assist
Plus inoperative * Adaptive Highbeam Assist Plus is malfunctioning. 
Drive on
or 
Stop the vehicle in accordance with the tr aPc conditions and restart the vehicle. 
If the display message does not disappear: consult a q ualiNed specialist workshop. 
Until then, operate the high beam manually.
Hazard warning lamp sys-
tem Malfunction * The hazard warning lamp switch is malfunctioning. 
Consult a q
ualiNed specialist workshop.Climate control
Display messages
Possible causes/consequences and P Solutions
;
inoperative See Owner's
Man. * The stationary heater is temporarily malfunctioning. 
When the vehicle is stationary on a level surface and the engine has cooled down, make up to four attempts to
switc

h on the stationary heater, waiting several minutes between each attempt. 
If the stationary heater does not switch on, consult a q
ualiNed specialist workshop.
% The stationary heater cannot be activated if the outside temperature is above 15°C. 460
Display messages and warning/indicator lamps

Page 464 of 585

Display messages
Possible causes/consequences and P Solutions
;
Currently unavailable Bat-
tery low * The on-board electrical system voltage is too low.
The s tationary heater has switched itself oM. 
Drive an extended distance until the battery has reached a suPcient c
harge level again.
;
Currently unavailable Refuel * There is too little fuel in the fuel tank. The stationary heater cannot be switched on. 
Refuel the vehicle.
;
Currently unavailable High-
voltage battery charging
incomplete. * The high-voltage battery is charging. Pre-entry climate control cannot be switched on. 
Wait until the charging process has achieved a minimum charge. Display messages and warning/indicator lamps
461

Page 465 of 585

Display messages
Possible causes/consequences and P Solutions
;
Currently unavailable
Charge high-voltage battery * The charge of the high-voltage battery is too low. Pre-entry climate control cannot be switched on. 
Charge the high-voltage battery ( pag e 204).
;
Pre-entry climate control
via key available again
after starting vehicle * You have attempted to switch on pre-entry climate control more than twice with the vehicle switched
oM.
Start the vehicle for ten seconds.
Pr
e-entry climate control is operational again.
; Pre-entry climate control
via key currently unavaila-
ble. High-voltage battery
low * The charge of the high-voltage battery is too low. Pre-entry climate control cannot be switched on. 
Charge the high-voltage battery ( pag
e 204).
When the high-voltage battery is suPciently charged, pre-entry climate control will be operational again. 462
Display messages and warning/indicator lamps

Page 466 of 585

Hybrid system
Display messages
Possible causes/consequences and P Solutions
Z
Towing not permitted See
Owner's Manual * The drive system is malfunctioning. 
Have the vehicle transported only using a transporter or trailer ( pag e 404).

Page 467 of 585

Display messages
Possible causes/consequences and P Solutions 
Request service personnel from the operator of the charging station via the emergency call button or the emer-
g ency numbers attached to the charging station.
Vehicle not currently being
charged Charging station
fault * A malfunction has occurred in the charging station or the RFID card is not recognised. 
Start the charging process at a diMer
ent charging station.
or 
Have the RFID card checked to ensure it is functioning.
Charging fault Please
change charging method
See Owner's Manual * A temporary malfunction has occurred in the charging station. 
Wait until the malfunction has passed.
or 
Start the charging process at a diMer
ent charging station.
AC charging inoperative
Consult workshop * The charging process cannot be started due to a malfunction. 
Consult a q
ualiNed specialist workshop.
DC charging inoperative
Consult workshop * The charging process cannot be started due to a malfunction. 
Consult a q
ualiNed specialist workshop.
Only electric drive availa-
ble Power limited * The fuel tank is empty and the combustion engine is switched
oM. The output of y
our vehicle is limited because you
are driving in electric mode. 464
Display messages and warning/indicator lamps

Page 468 of 585

Display messages
Possible causes/consequences and P Solutions 
Refuel immediately.
Subseq
uently, there may be temporary restrictions in the availability of electric mode over a driving distance of
50 km.
If there is fuel in the vehicle, there is a fault with the combustion engine. 
Consult a q
ualiNed specialist workshop.
"Electric" drive program
currently unavailable * The charge level of the high-voltage battery is not
suPcient f
or the Electric drive program.
Charge the high-voltage battery ( page 204).
Reduced drive system per-
formance See Owner's
Manual * The drive system switches to emergency operation mode due to a malfunction. 
Drive on carefully. 
Consult a q
ualiNed specialist workshop.
Preparing drive system

Page 469 of 585

Display messages
Possible causes/consequences and P Solutions 
Consult a qualiNed specialist workshop even if there are no external signs of a Nre.
Û
Malfunction * The drive system is malfunctioning. A warning tone will also sound. 
Consult a q
ualiNed specialist workshop.
Û
Malfunction Visit workshop * The drive system is malfunctioning. 
Consult a q
ualiNed specialist workshop.
Û
Have high-voltage system
checked See Owner's Man-
ual * A function restriction has occurred in the drive system. 
Consult a q
ualiNed specialist workshop.
Consult workshop without
changing the transmission
position * The transmission is malfunctioning. It is no longer possible to change the transmission position. 
If transmission position h is select
ed, consult a qualiNed specialist workshop and do not change the transmission
position. 466
Display messages and warning/indicator lamps

Page 470 of 585

Display messages
Possible causes/consequences and P Solutions 
For all other transmission positions, park the vehicle safely. 
Consult a qualiNed specialist workshop.
Consult workshop without
starting the vehicle again * It is not possible to restart the drive system due to a malfunction. 
Do not switch oM t
he drive system; drive on to the nearest qualiNed specialist workshop.
Û Output and range reduced
See Owner's Manual * A malfunction has occurred in the high-voltage battery.
Output and r
ange will be severely restricted. 
Switch the vehicle oM and loc
k it. 
Aser w
aiting for a short time, unlock the vehicle and start it again.
If the display message appears again: 
Drive on carefully. 
Fully charge the high-voltage battery ( pag
e 204).
If the output and range are still reduced, there is a malfunction in the drive system. 
Drive on carefully. 
Consult a q
ualiNed specialist workshop.
Cannot start vehicle See
Owner's Manual * It is not possible to start the vehicle.
A malfunction has occur
red in the drive system. 
Switch the vehicle oM and loc
k it. Display messages and warning/indicator lamps
467

Page:   < prev 1-10 ... 421-430 431-440 441-450 451-460 461-470 471-480 481-490 491-500 501-510 ... 590 next >