jump start MERCEDES-BENZ C55AMG 2006 W203 Owner's Manual

Page 8 of 473

Contents
Uniform Tire Quality Grading
Standards (U.S. vehicles) ............. 329
Tire ply material ........................... 331
Tire and loading terminology ........ 331
Rotating tires ............................... 335
Winter driving .................................... 336
Winter tires .................................. 336
Block heater (Canada only) .......... 337
Snow chains................................. 337
Maintenance...................................... 338
Maintenance service indicator
message....................................... 338
Calling up the maintenance
service indicator display............... 339
Resetting the maintenance
service indicator........................... 340
Vehicle care ....................................... 341
Cleaning and care of the vehicle .. 341
Practical hints.................................. 349
What to do if … ................................... 350
Lamps in instrument cluster ......... 350
Lamp in center console................. 357
Vehicle status messages in the
multifunction display..................... 358
Where will I find ...? ............................ 380
First aid kit.................................... 380
Vehicle tool kit .............................. 380
Spare wheel .................................. 383
Spare wheel bolts ......................... 385
Unlocking/locking in an emergency... 386
Unlocking the vehicle.................... 386
Locking the vehicle ....................... 387
Manually unlocking the
transmission gear selector lever ... 388
Opening/closing in an emergency ..... 389
Power tilt/sliding sunroof ............. 389
Resetting activated head restraints .... 391
Resetting activated head
restraints ...................................... 391
Replacing SmartKey batteries ............ 392
SmartKey ...................................... 393Replacing bulbs .................................. 394
Bulbs............................................. 395
Replacing bulbs for front lamps .... 397
Replacing bulbs for rear lamps ..... 400
Replacing wiper blades ...................... 402
Removing and installing wiper
blades ........................................... 402
Flat tire............................................... 404
Preparing the vehicle .................... 404
Mounting the spare wheel ............ 404
Battery ............................................... 411
Disconnecting the battery ............ 412
Removing the battery ................... 412
Charging and reinstalling the
battery .......................................... 413
Reconnecting the battery ............. 413
Jump starting...................................... 415
Towing the vehicle.............................. 417
Installing towing eye bolt .............. 419
Fuses.................................................. 420
Aids for replacing fuses ................ 420
Main fuse box in passenger
compartment ................................ 421
Fuse box in engine compartment . 421
Fuse box in trunk .......................... 422

Page 35 of 473

34 Getting started
Unlocking
i
When you switch on ignition, the
indicator and warning lamps (except
low beam headlamp indicator lamp,
high beam headlamp indicator lamp,
and turn signal indicator lamps unless
activated) in the instrument cluster
come on. The indicator and warning
lamps (except low beam headlamp in-
dicator lamp, high beam headlamp indi-
cator lamp, and turn signal indicator
lamps if activated) will go out when the
engine is running. This indicates that
the respective systems are operational.
i
The SmartKey can only be removed
from the starter switch with the gear
selector lever in positionP.
!
If the SmartKey cannot be turned in the
starter switch, the battery may not be
sufficiently charged.
Check the battery and charge it if
necessary (
page 411).
Get a jump start (page 415).
To prevent accelerated vehicle battery
discharge or a completely discharged
battery, always remove the SmartKey
from the starter switch when the en-
gine is not in operation.

Page 47 of 473

46 Getting started
Driving
Starting
Place the gear selector lever in
positionP.
Do not depress the accelerator.
Turn the SmartKey in the starter switch
to position3 (
page 33) and release it
again immediately. The engine then
starts automatically.
For information on turning off the engine,
see “Turning off engine” (
page 56).Starting difficulties
If the engine does not start as described,
carry out the following steps:
Turn the SmartKey in starter switch to
position0 and repeat the starting
procedure (
page 45).
Remember that extended starting
attempts can drain the vehicle battery.
Get a jump start (page 415).
If the engine does not start after several
starting attempts, there could be a mal-
function in the engine electronics or in the
fuel supply system.
Notify an authorized Mercedes-Benz
Center.
Parking brake
Warning!G
When leaving the vehicle, always remove the
SmartKey from the starter switch, take it
with you, and lock the vehicle. Do not leave
children unattended in the vehicle, or with
access to an unlocked vehicle. Children
could release the parking brake, which
could result in an accident and/or serious
injury.

Page 270 of 473

269 Controls in detail
Useful features
The Mercedes-Benz Roadside Assistance
dispatcher will either dispatch a qualified
Mercedes-Benz technician or arrange to
tow your vehicle to the nearest
Mercedes-Benz Center. For services such
as labor and/or towing, charges may ap-
ply. Refer to the Roadside Assistance Man-
ual for more information.
These programs are only available in the
USA:
Sign and Drive services: Services such
as jump start, a few gallons of fuel or
the replacement of a flat tire with the
vehicle spare tire are obtainable.
i
The indicator lamp on the Roadside
Assistance button• remains illumi-
nated in red for approximately
10 seconds during the system
self-check after switching on the igni-
tion (together with the SOS button and
the Information button¡).
See system self-check (
page 266) if
the indicator lamp does not come on in
red or stays on longer than
approximately 10 seconds.
If the indicator lamp on the Roadside
Assistance button• is flashing
continuously and there was no voice
connection to the Response Center
established, then the Tele Aid system
could not initiate a Roadside Assis-
tance call (e.g. the relevant cellular
phone network was not available). The
message
Call failed appears in the
multifunction display.
Roadside Assistance calls can be
terminated using thet button on
the multifunction steering wheel or the
END Button on the audio system or
COMAND* System.

Page 350 of 473

349 Practical hints
What to do if …
Where will I find ...?
Unlocking/locking in an emergency
Opening/closing in an emergency
Resetting activated head restraints
Replacing SmartKey batteries
Replacing bulbs
Replacing wiper blades
Flat tire
Battery
Jump starting
Towing the vehicle
Fuses

Page 412 of 473

411 Practical hints
Battery
Battery
The battery is located in the engine
compartment on the right hand side.
1Clamps
Removing filter box:
Release clamps1.
Remove filter box.
Installing filter box:
Insert filter box properly.
Secure it with clamps1.
Warning!G
Failure to follow these instructions can
result in severe injury or death.
Observe all safety instructions and
precautions when handling automotive
batteries (
page 303).
Never lean over batteries while connecting,
you might get injured.
Battery fluid contains sulfuric acid. Do not
allow this fluid to come in contact with eyes,
skin or clothing. In case it does, immediately
flush affected area with water and seek
medical help if necessary.
A battery will also produce hydrogen gas,
which is flammable and explosive. Keep
flames or sparks away from battery, avoid
improper connection of jumper cables,
smoking, etc.
Warning!G
Do not place metal objects on the battery as
this could result in a short circuit.
Use leak-proof battery only to avoid the risk
of acid burns in the event of an accident.
!
Never loosen or detach battery termi-
nal clamps while the engine is running
or the SmartKey is in the starter switch.
Otherwise the alternator and other
electronic components could be se-
verely damaged.
Have the battery checked regularly by
an authorized Mercedes-Benz Center.
Refer to Maintenance Booklet for
maintenance intervals or contact an
authorized Mercedes-Benz Center for
further information.

Page 416 of 473

415 Practical hints
Jump starting
Jump starting
If the battery is discharged, the engine can
be started with jumper cables and the
battery of another vehicle. Observe the
following:
Jump starting should only be performed
when the engine and catalytic con-
verter are cold.
Do not start the engine if the battery is
frozen. Let the battery thaw out first.
Only jump start from batteries with the
same voltage rating (12 V). Jump
starting with a more powerful battery
could damage the vehicle’s electrical
system, which will not be covered by
the Mercedes-Benz Limited Warranty.
Only use jumper cables with sufficient
cross-section and insulated terminal
clamps.
Always make sure the jumper cables
are not on or near pulleys, fans, or oth-
er parts that move when an engine is
started or running.
Warning!G
Failure to follow these directions will cause
damage to the electronic components, and
can lead to a battery explosion and severe
injury or death.
Never lean over batteries while connecting
or jump starting, you might get injured.
Battery fluid contains sulfuric acid. Do not
allow this fluid to come in contact with eyes,
skin or clothing. In case it does, immediately
flush affected area with water, and seek
medical help if necessary.
A battery will also produce hydrogen gas,
which is flammable and very explosive. Keep
flames or sparks away from battery, avoid
improper connection of jumper cables,
smoking, etc.
Attempting to jump start a frozen battery
can result in it exploding, causing personal
injury.
Read all instructions before proceeding.
!
Do not tow-start the vehicle.
!
Avoid repeated and lengthy starting
attempts.
Do not attempt to start the engine
using a battery quick charge unit.
If engine does not run after several
unsuccessful starting attempts, have it
checked at the nearest authorized
Mercedes-Benz Center.
Excessive unburned fuel generated by
repeated failed starting attempts may
damage the catalytic converter and
may present a fire risk.
Make sure the jumper cables do not
have loose or missing insulation.
Make sure the cable clamps do not
touch any other metal part while the
other end is still attached to a battery.

Page 417 of 473

416 Practical hints
Jump starting
The battery is located in the engine
compartment on the right hand side. The
terminals for jump starting are located in
front of the battery.
Make sure the two vehicles do not
touch.
Turn off all electrical consumers.
Apply parking brake.
Shift gear selector lever to positionP.
Open the hood (page 297).
Flip up cover positive under hood
terminal2 in front of the filter box
(
page 411).1Positive terminal of charged battery
2Positive under hood terminal in front of
discharged battery
3Negative under hood terminal in front
of discharged battery
4Negative terminal of charged battery
Connect positive terminal1 of the
charged battery with positive under
hood terminal2 in front of the filter
box with the jumper cables. Clamp ca-
ble to charged battery1 first.
Start engine of the vehicle with the
charged battery and run at idle speed.
Connect negative terminal4 of the
charged battery with negative under
hood terminal3 in front of the filter
box with the jumper cables. Clamp ca-
ble to charged battery4 first.
Start the engine of the disabled
vehicle.
You can now again turn on the electrical
consumers. Do not turn on the lights under
any circumstances.
Remove the jumper cables first from
negative terminals3 and4 and then
from positive terminals2 and1.
You can now turn on the lights.
Have the battery checked at the near-
est authorized Mercedes-Benz Center.
Warning!G
Keep flames or sparks away from battery.
Do not smoke.
Observe all safety instructions and precau-
tions when handling automotive batteries
(
page 303).
!
Never invert the terminal connections!

Page 420 of 473

419 Practical hints
Towing the vehicle
Installing towing eye bolt
1Cover on right side of front bumper.
2Cover on right side of rear bumper.Removing cover
Press mark on cover1 or2 in
direction of arrows.
Lift cover off to reveal the threaded
hole for towing eye bolt.
The towing eye bolt is supplied with the
tool kit (located in the compartment under-
neath the trunk floor).
Screw towing eye bolt in to its stop and
tighten with lug wrench.
Reinstalling cover
Fit cover1 or2 and snap into place.
i
If the battery is disconnected or
discharged
the SmartKey will not turn in the
starter switch. For more informa-
tion, see “Battery” (
page 411)
and “Jump starting” (
page 415).
the gear selector lever will remain
locked in positionP. For informa-
tion on manually unlocking the
transmission gear selector lever
(
page 388).

Page 451 of 473

450 Index
Audio system 197
Audio and telephone, operation 197
Button and soft key operation 200
CD changer* with MP3 216
CD operation 214
Operating and display elements 198
Operating audio system 200
Operating safety 197
Radio operation 205
Telephone* operation 223
Auto-dimming mirror* 169
Automatic central locking
Activating/deactivating
(Control system) 147
Automatic climate control*
(Canada only) 184
Control panel 185
Defrosting, front 190
Rear window defroster 173
Automatic headlamp mode 115
Automatic locking when driving 103
Automatic shift program
Program mode selector switch
(Automatic transmission) 161Automatic time change (Standard time,
Daylight Saving time) 142
Automatic transmission 155
Accelerator position 158
Automatic shift program 161
Emergency operation
(Limp-Home Mode) 168
Fluid level (ATF) 301
Gear ranges 160
Gear selector lever 155
Gear shifting malfunctions 168
Kickdown 158
Kickdown, manual shift program 167
Manual shift program 165
Manual shifting 162
One-touch gearshifting,
Gear selector lever 162
One-touch gearshifting,
Steering wheel gearshift
control 163
Program mode selector switch 161
Program mode selector switch,
manual shift program 165
Starting engine 46B
BabySmartTM
Air bag deactivation system 75, 443
Compatible child seats 75, 443
Self-test 76
Backrest
Rear seat, folding 252
Seat, power 36
Backup lamps
Messages in display 374
Replacing bulbs 396
Bar 331
BAS 84, 443
Batteries, SmartKey
Changing 393
Checking battery condition 98
Battery, Vehicle 303, 411
Charging 413
Disconnecting and connecting 412
Jump starting 415
Removing and installing 412
Bead 331
Bi-Xenon headlamps see headlamps
Block heater (Canada only) 337
Bolts, Spare wheel 385
Brake Assist System see BAS

Page:   1-10 11-20 next >