display MERCEDES-BENZ CL-Class 2003 C215 Comand Manual

149 Navigation
Route guidance
Requesting route mode
Turn the right-hand rotary/push-button
v in the selection menu “Destination
Info” to highlight “Options” and press
to confirm.
The settings for the current route are
displayed. Switching back to the symbol or map dis-
play

Press * or wait approximately 15
seconds. Activating the location map
If route guidance is active

Turn the right-hand rotary/push-button
v in the selection menu “Destination
Info” to highlight “Location Map” and
press to confirm.
The location map faces north (North-
up).
P82.85-9458-31US
NAVI Route Mode
Short Route

No Freeway, with Toll,
with Ferry

No Blocking

iSelecting calculation mode
(page 141)
Selecting a detour during destination
guidance (
page 162)
Marking a way point (
page 160)

150 NavigationRoute guidance1Geographic longitude and latitude for
your current location
2Number of satellites received
3Scale used the last time the location
map was activated
Altering the map scale (
page 158).Switching back to the symbol or map dis-
play

Press * twice.
If route guidance is switched off

Press l.
The location map will appear.

Press l again to activate the main
destination input menu.Activating the route map
1Current vehicle location
2Route displayed as blue line
3Destination
P82.85-9459-31USP82.85-9459-31US
9ANEW YORK
174°01’38’’W 40°43’34’’N 6 SAT.1
2
TRIMBLE PL
0.5 mi
3
iIf the location map appears after
COMAND has been switched on,
pressb to activate the main destina-
tion input menu.
P82.85-9460-31USP82.85-9460-31US
27
25A
25
495
278
78HOBOKEN
NEW YORK
2 mi
1
2
3

151 Navigation
Route guidance

Turn the right-hand rotary/push-button
v in the selection menu “Destination
Info” to highlight “Route Map” and
press to confirm.
The route map faces north (North-up)
and shows the general view for the
whole route.
The map scale selected depends on the
route.
Switching back to the symbol or map dis-
play

Press *.Displaying current destination

Turn the right-hand rotary/push-button
v in the selection menu “Destination
Info” to highlight “Current Destn.” and
press to confirm.
You will see the current destination.Switching back to the symbol or map dis-
play

Press * or wait approximately 15
seconds.
Displaying a stop-over
You can display this information if you
have previously selected a way point
(
page 160).

Turn the right-hand rotary/push-button
v in the selection menu “Destination
Info” to highlight “Stop” and press to
confirm.
P82.85-9461-31US
NAVI InformationCurrent Destn:
NEW YORK
Center:
NEW YORK

152 NavigationRoute guidanceOnce the route has been calculated, the
symbol display will appear.
If you now are at the maneuver point, you
will also hear a voice output, e.g. “Please
turn right”.During route guidance, you can select the
following 3 screen displays:

Symbol display

Map display

Mix of map and symbol display
(page 157)
Voice output
During the trip, apart from visual informati-
on (symbol or map displays), COMAND
also provides all of the necessary route in-
formation via voice output.
COMAND gives you spoken recommenda-
tions

when route guidance begins

after the route has been calculated

before and during a change in the dri-
ving direction

on reaching the destination or a way
point
Beginning route guidance
P82.85-9462-31US
RECTOR ST
Map
Stop
Mix
SOUTH ST
Warning
G
Voice output is intended to direct you while
driving without diverting your attention from
the road and driving. Please always use this
feature instead of consulting the symbol or
map display for directions while driving
which may cause you to divert your attenti-
on from driving and increase your risk of ac-
cident.

156 NavigationRoute guidance1Activating map display
You can select one of the two possibilities:
Press the right-hand rotary/push-
button v to confirm 1.
or

Press l.
The map will appear in the scale last se-
lected.2Return to symbol display
Back to the symbol display

Press the right-hand rotary/push-
button v to confirm 2.
Changing to map display
P82.85-9467-31US
W THAMES ST
Map
Stop
Mix
BATTERY PL
1
HUDSON RIVER
P
P
P
P
P
P
Stop
Scale
1
0.2 mi
P82.85-9468-31US
2
SMITH ST
Stop
Scale
iCOMAND will remove the menu bar af-
ter 5 seconds.
Turn the right-hand rotary/push-
button v to recall the menu bar to
the screen.

157 Navigation
Route guidance
If the function Mix is switched on, the sym-
bol display is activated automatically from
the map display before making a maneu-
ver. After you have made the maneuver,
the map will appear again.Switching the mix function on

Turn the right-hand rotary/push-button
v to highlight “Mix” in the symbol dis-
play and press to confirm.
“Mix” appears in red.
Switching the mix function off

Turn the right-hand rotary/push-button
v to highlight “Mix” in the map or sym-
bol display and press to confirm.
“Mix” appears in black again.
-Symbol display before a maneuver, mix
function is switched on
Before a maneuver off e.g. a U-turn,
COMAND will activate the symbol display.
After you have made the U-turn, the map
will appear again.
Mix of map and symbol display
P82.85-9469-31US
0.4 mi
Map
Stop
MixBROADWAY

158 NavigationRoute guidanceActivate the scale selector
While the left menu bar is displayed,
turn the right-hand rotary/push-button
v to highlight “Scale” and press to
confirm.
The scale selector will appear.
or

Press % or /.
The scale selector will appear and apart
from the current scale _, will show the
next larger or next smaller scale ?. 1Scale selector
Current map scale _
New map scale ?
Zooming in for more detailed map

Press % within 5 seconds or turn the
right-hand rotary/push-button v to
the left.

Press the right turning knob/push but-
ton v or wait 5 seconds to call the
map with the new scale.Zooming out for less detailed map

Press / within 5 seconds or turn the
right-hand rotary/push-button v to
the right.

Press the right turning knob/push but-
ton v or wait 5 seconds to call the
map with the new scale.
Altering the map scaleiA division mark corresponds to an avai-
lable scale. You can select 13 different
scales ranging from 0.05 miles/inch to
500 miles/inch.
95
PARKER RIVE
R
P82.85-9470-31US
0.5 mi
0.05mi 5 mi 500 mi
1
JEWETT ST
95
PARKER RIVE
R
P82.85-9470-31US
0.5 mi
0.05mi 5 mi 500 mi
1
JEWETT ST
95
P82.85-9471-31US
0.2 mi
JEWETT ST

159 Navigation
Route guidance
You can either select the map in north-up
orientation or position it with the driving di-
rection pointing up.North-up
!
: Map is displayed facing north
1Selecting map orientation
Compass needle < - call map with
Heading-up display
North arrow ! - call map with North-
up display
2Symbol for current vehicle locationSelecting driving direction pointing up
Heading-up
<
: Map is displayed facing dri-
ving direction pointing up

Turn the right-hand rotary/push-button
v to highlight < and press to con-
firm.
The map will appear with Heading-up
display. The tip of symbol 2 will al-
ways points to the top.To return to North-up

Turn the right-hand rotary/push-button
v to highlight ! and press to con-
firm.
The north arrow will appear again.
Selecting map orientation
P82.85-9472-31US
SMITH ST
Stop
Scale
0.5 mi
1
2
P82.85-9473-31US
SMITH ST
Stop
Scale
0.05 mi
1
2
Map orienta-
tion
Characteristics
North-up
North arrow always
points to the top
Symbol 2 is turning on
the map
Heading-up
The tip of symbol 2 al-
ways points to the top,
the map turns under-
neath 2
The compass needle is
turning, the black point
always points north

161 Navigation
Route guidance
Starting route guidance
Press the right-hand rotary/push-
button v to confirm “Start
Guidance…”.You will now see the information corres-
ponding to route calculation and hear the
voice output: “The route to your intermedi-
ate destination is being calculated”.
The previously selected route mode will be
maintained.
After you reach the way point, you will con-
tinue to follow the route to the original in-
put destination.
Deleting way point

Turn the right-hand rotary/push-button
v to highlight “Stop” in the symbol or
map display and press to confirm.
The “Way Point” menu will appear, “De-
lete stop-over...” is highlighted.

Press the right-hand rotary/push-
button v to confirm “Delete stop-
over...”.
The way point has been deleted.
If you do not want to delete the way point

Press *.
iAfter you have entered an address, the
menu fields “Intersection…” and “House
No...” may appear in black, indicating
that it is possible to select them.
P82.85-9478-31US
NAVI Destination EntryStart Guidance...
Intersection...
House No...
iIf the menu bar is not visible in the map:
Turn the right-hand rotary/push-
button v.
The menu bar will appear.
iIt is also possible to delete a way point
in the menu (
page 166).

164 NavigationRoute guidance
Detour in route list
Turn the right-hand rotary/push-button
v to highlight “Detour in Route List” in
the main detour menu and press to
confirm.
The message “The route list is being
calculated” will appear.
Then the route list will appear.
Route list1Street cannot be blocked off
2Symbol “+”: street contains several
sections which can be blocked off
Displaying an entry in full in a window
Press u.

Press u again to remove the window.
iCOMAND will delete an existing detour
if you
enter a new detour

switch off the system for more than
30 minutes while a detour is activa-
ted
After you have switched the COMAND
on again you will see the message “Ma-
nual route exclusions being reset”.
P82.85-9481-31US
NAVI Traffic Jam
4081 E OLYMPIC B
399 S HILL
250 S GRAND AVE
630 W 5TH
3589 S FIGUEROA 200 N STATE
12
1.0 MI
2.4 MI
1.8 MI
0.5 MI
1.6 MI 1.2 MI