buttons MERCEDES-BENZ CL-Class 2004 C215 Comand Manual

33 Audio
Radio operation
You can use the following functions:
Automatic seek tuning (
page 33)

Manual tuning (
page 33)

Station selection from the Preset menu
(page 34)

Station selection via direct frequency
entry (FM, AM) (
page 35)

Automatic station scan (FM, AM)
(page 35)

Station selection from the FM/AM
Autostore presets (
page 38)Automatic seek tuning

Press g or h.
or

Press g or G.
FM- and AM-Bands, Weather Band WB
The radio will tune in to the next receivable
station (FM, AM) or channel (WB) with de-
scending/ascending frequency depending
on the direction of seek.
WB
Alternatively, you can select the channel
directly:

Press a number key 1 through 7.Manual tuning (FM, AM)

Activate the desired wave band
(page 32).

Press g or h longer than 2 se-
conds.
The function is active.
or

Press H or h.
The frequency will change by the tuning
increments for the respective
waveband each time one of the buttons
is pressed.
FM Band
The frequency displayed will change in in-
crements of 0.2 MHz.
AM Band
Tuning will take place in increments of
10 kHz.
Selecting a station
iThe selected channel is not shown in
the status line.

105 Telephone*
Telephone operation
You can select the following functions:
Changing the phone book display at
the COMAND

Selecting a phone book entry and
dialing the number (
page 105)

Entering and saving a new phone book
entry (
page 106)

Deleting a phone book entry at the
COMAND (
page 108)
Changing the phone book display

Open the phone book (
page 104).

Press the
123
soft key.
The display changes to numbers. The
status bar displays the name of the
marked entry.
or

Press the
ABC
soft key.
The display changes to names. The
status bar displays the number of the
marked entry.
Selecting a phone book entry and
dialing the number

Open the phone book (
page 104).
The list of phone book entries with
names starting with a certain letter is
displayed.
Changing the initial letters

Press H or h one or several times.
With every push of the button the
display changes to the next possible
letter. At the end of the letter list
follows the category
Other
.Category
Other
:
Here, all entries without names or with
names starting with a special character
(e.g. * or #) are put together.
Selecting an entry

Change the initial letter if required.

Use G or g to select a list entry.iIf you hold one of the buttons, scrolling
is accelerated.

107 Telephone*
Telephone operation
Input menu
The phone number is automatically en-
tered in the
Number
input field. The
Name field is automatically marked
and shows no name or the last name
entered.Entering a name or number

Use g or G to select the name or
the number field.
You can input data:
using the selection menu

via the number keys 1 - #
Using the selection menu:

Press the
Keypad
soft key.
The selection menu appears.
Selection menu

Enter the data using the selection
menu (
page 191).
After input using the selection menu,
the input menu is displayed again. You
can select the next data field and enter
data.
Input via the number keys 1 - #:

Use buttons 1 - # to enter the data
(page 193).

110 NavigationImportant notesWarning
G
For safety reasons, you should only enter a
destination when the vehicle is stationary.
When the vehicle is in motion, a passenger
should enter the destination. Study manual
and select route before driving.
Do not watch display screen or operate but-
tons while the vehicle is in motion - let voice
instructions guide you. Stop at a safe locati-
on before using buttons or making correc-
tions.
Traffic regulations always have priority over
any route recommendations given.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car is co-
vering a distance of 50 feet (approximately
14 m) every second.
The route calculated by COMAND is a re-
commendation on how to best reach your
selected destination.
During route guidance, you will not receive
any information on
Traffic lights

Stop and yield signs

Parking or stopping zones

One-way streets

Narrow bridges

Similar traffic regulation data
You should therefore always strictly observe
traffic regulations while driving. Drive care-
fully and always obey traffic laws and road
signs even if they contradict COMAND in-
structions.
Warning
G
The Navigation DVD module contains a
Class 1 laser product. There is a danger of
invisible laser radiation if the cover is ope-
ned or damaged.
Do not remove the cover. The Navigation
DVD module does not contain any parts ser-
viceable by the user. For safety reasons,
have any necessary service work performed
only by qualified personnel.

Important notes

131 Navigation
Destination input
Selecting a destination using the map
Press c.

Press one of the buttons H, h, g,
G, F, f.
or

Press the
Map
soft key, e.g. in the
Destination Entry menu (
page 121).
The map is shown in full view and
cross-hairs appear.
If soft key displays are hidden:

Press any soft key.
The soft key displays will appear.Available soft keys

POIs
soft key:
Brings you to the Points of Interest
(POI) menu (
page 156).

Memory
soft key:
A window appears with the
message Position Saved as
MemPt
. (page 118).

Display
soft key:
The Map View display will appear.
You can adjust the map orientation
(
page 148).

Soft key +:
Zooming in for more detailed map.

Soft key ):
Zooming out for less detailed map.
iThe system automatically places the
cross-hairs on the current destination
address.
ic was pressed:
If no soft key is selected within approx.
8 seconds, the soft key display will
disappear again.

132 NavigationDestination input
Press H, h, g, G, F, f to
move the cross-hairs.
The direction of movement of the
buttons depends on the map direction
selected (
page 148).

2D North Up, 2D Heading Up:
Press F and f to move the
cross-hairs diagonally.

Bird’s-Eye View:
Use H and h to turn the map
round the vertical axis of the cross-
hairs.
Press g or G to move your
position on the map forward or
backward.This allows you to select your destination.

Release the button.
If the system is able to assign a street
name to the selected location, it is
displayed on the status bar.
In this example:
NEWPORT
RD

Press E.
The system uses the point at the center
of the cross-hairs as destination.
Route guidance will begin.
iIf you press the
Back
soft key, your
selection will be discarded. The system
then uses the data of the previous
destination.

175 Service
Address book

Select an address book entry with the
symbol (
page 169).

Press the
Details
soft key.
The detail view will appear.You can use the soft keys to use other
functions for the mobile phone internal
memory entry:

Keypad
soft key:
Changes a mobile phone internal
memory entry (
page 175).

Import
soft key:
Imports a mobile phone internal
memory entry into the address book
(
page 176).
Changing a mobile phone internal
memory entry

Activate the detail view of the desired
mobile phone internal memory entry.
A list with two data fields is displayed
(name and phone number).

Press g or G to select a data field
(e.g. the name field).
You can enter data in a field using the
12-button keypad (1 - #) or the
selection menu.
Input via selection menu

Press the
Keypad
soft key.
The selection menu will appear.

Enter the data using the selection
menu (
page 191).
After you have entered the data, the
entry edit menu is displayed again. You
can select the next data field and enter
data.
Input via 12-button keypad

Press buttons 1 - # to enter the
data (
page 193).
Details on a mobile phone internal
memory entry
iIf you change a mobile phone internal
memory entry in the address book, the
entry is automatically also changed on
the mobile phone internal memory.

184 ServiceNotebook
You can enter a title using the 12-keys
keyboard (1 - #) or the selection
menu.
Input via 12-button keypad

Press buttons 1 - # to enter a title
directly (
page 193).
Input via selection menu:

Enter a title using the selection menu
(page 191).
Ending title input

After you have entered the title, press
the
Back
soft key.
or

Press the
OK
soft key.
The title is saved. The notebook will
appear.

Press the
New
soft key.
For example, the entry
Note 4
is
displayed.
New note
is displayed on
the status bar.

Press the
Record
soft key.
The system is ready to record.

Now speak the text you wish to record.Pausing a record

Press the
Pause
soft key.
Pause
is displayed on the status bar.
Recording a new note
iThe maximum record time is 16
minutes.
Message
Notebook Memory Full
:
You need to delete one or more notes
(
page 187) to empty part of the
memory.
Message
Notebook Recording
Memory Full
:
You can only enter a text note. To
record a note, you need to empty part
of the recording memory.