navigation MERCEDES-BENZ CL-Class 2005 C215 Comand Manual

30 At a glanceQuick reference COMAND
Press H or h.
Move the cross-hairs horizontally and
adjust the balance.
or

Press g or G.
Move the cross-hairs vertically and
adjust the fader.

Press E or the
Back
soft key.
or

Wait until the display changes.
The new setting is saved.Different bass and treble settings are
possible for the following operating
modes:

Radio operation (FM and AM band)

CD operation (single CD)

CD changer* operation

MP3-CD operation

DVD operation

Satellite radio* operation

Navigation operation
The Bass/Treble settings for navigation
announcements are described at “Audio
settings for the navigation
announcements” (
page 121).When you adjust Bass or Treble, the
system will automatically save the settings
for the current operating mode.
Activating the Bass or Treble menu
In Radio, CD, CDC*, MP3-CD, DVD or
satellite radio* operation:

Press the Bass or Treble soft key.
The Bass or Treble menu will appear.
You can now make bass or treble
settings (
page 31).
iUse F and f to move the
cross-hairs diagonally.
Bass and Treble

113 Navigation
Important notes
Navigation main menu
Destination input
Route guidance
During route guidance
Last destinations and destination memory
POIs
Software updates

114 NavigationImportant notes

Important notesWarning
G
For safety reasons, you should only enter a
destination when the vehicle is stationary.
When the vehicle is in motion, a passenger
should enter the destination. Study manual
and select route before driving.
Do not watch display screen or operate but-
tons while the vehicle is in motion - let voice
instructions guide you. Stop at a safe locati-
on before using buttons or making correc-
tions.
Traffic regulations always have priority over
any route recommendations given.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car is co-
vering a distance of 44 feet (approximately
14 m) every second.
The route calculated by COMAND is a re-
commendation on how to best reach your
selected destination.
During route guidance, you will not receive
any information on
Traffic lights

Stop and yield signs

Parking or stopping zones

One-way streets

Narrow bridges

Similar traffic regulation data
You should therefore always strictly observe
traffic regulations while driving. Drive care-
fully and always obey traffic laws and road
signs even if they contradict COMAND in-
structions.
Warning
G
The Navigation DVD module contains a
Class 1 laser product. There is a danger of
invisible laser radiation if the cover is ope-
ned or damaged.
Do not remove the cover. The Navigation
DVD module does not contain any parts ser-
viceable by the user. For safety reasons,
have any necessary service work performed
only by qualified personnel.

115 Navigation
Important notes
COMAND calculates the route with the
help of data that is stored on the navigati-
on DVD.
Only use Mercedes-Benz navigation DVDs.
Using other navigation DVDs or CDs will
cause malfunctions and/or damage.
Because of changes in local traffic patterns
(e.g. road works) and/or incomplete data,
errors in calculation may occur.
As a result, the recommended route may
deviate from the ideal route. The data
stored on the DVD only reflects local con-
ditions at the time of DVD production. DVD
maps do not cover all areas nor all routes
within an area.Loading/ejecting a DVD
DVDs are loaded and ejected at the
navigation computer. The navigation
computer is located on the left side in the
trunk.
Open panel cover to get access to the
navigation computer. 1Ejecting DVDs
2DVD slot
Ejecting

Press l.
The navigation computer ejects the
DVD.
Navigation DVDiThe message
No DVD Available
Please Insert Navigation DVD

will appear if no DVD is currently
loaded in the navigation computer.
!GPS (G
lobal P
ositioning S
ystem) sig-
nals received make it possible to deter-
mine the current vehicle position.
Deviations from the actual position
may occur

if the reception of GPS signals is
disturbed e.g. in parking garages
and tunnels

if road conditions are bad

depending on the vehicle’s conditi-
on
iIf you do not remove the DVD from
the slot within around 15 seconds, the
COMAND will pull the DVD into the
drive.

116 NavigationImportant notesLoading
Insert the DVD into the DVD slot 2
with the label side up.
The navigation computer pulls the DVD
in.
If your vehicle has been transported (e.g.
by a car, train or ferry) the system may
make navigation announcements which do
not correspond to the vehicle’s position.
The system needs to redetermine its
position.Determining the location after the
vehicle has been transported
The system will need some time to
determine its location after the car has
been transported. The time required for
the system to do so varies from case to
case.

Switch the COMAND on.

Activate the Navigation main menu
(page 118).
The navigation DVD needs to be in the
navigation computer (
page 115).

Drive and press c.
The display will change to the map
display.Drive until the position or the road
indicated correspond to the real
circumstances. The system is now
correctly adjusted.
Route guidance after the vehicle has
been transported

117 Navigation
Important notes
The following applies if you interrupt your
trip and continue later on:
Trip is continued within 2 hours:
The system will automatically resume
route guidance.

Trip is continued after more than
2 hours: 
Press E to confirm
Continue
Route Guidance in the
Navigation main menu
(
page 118).
Trip interruption during route
guidanceiTrip interruption means the vehicle is
parked and COMAND is switched off.
Trip continuation means the vehicle is
moving and COMAND is switched on
again.

118 NavigationNavigation main menu

Navigation main menu
Press b.
The Navigation main menu will appear.

Use G or g to select a menu item.

Press E.
or

Press one of the soft keys. Available
soft keys (
page 119).
The selected menu or the function of
the selected soft key appears.Selectable Menu Items

Continue Route Guidance
:
Resumes interrupted or aborted route
guidance.
Activating the Navigation main
menu iIf a navigation submenu is displayed,
you need to press the button twice.
iIf route guidance is active, a message
appears instead asking you whether
you wish to resume route guidance
(page 143).
If route guidance has been interrupted
for more than 2 hours, the entry
Continue Route Guidance
will be
on top of the list.
iThis menu item appears if you:
have aborted route guidance
(page 143) and less than 30
minutes have elapsed since the
guidance process was aborted

have interrupted your journey and
continue it after more than 2 hours

119 Navigation
Navigation main menu

Destination
Memory
You can select destinations from the Destination Memory
(page 158).

Destination
Entry
Activates the
Destination
Entry

menu (
page 124).

Last
Destinations
You can select last destinations from
the
Last Destinations
memory
(
page 155).

POIs
:
Brings you to the
POIs
input menu
(
page 160).
POIs are e.g. gas stations, parking
facilities or airports. Available soft keys

Home
soft key:
You can edit the home address and
start route guidance (
page 138).

Mode
soft key:
Brings you to the route mode setting
for the next route guidance
(
page 120).

Setting
soft key:
Here, you can make audio settings for
the navigation announcements (treble,
bass, balance and fader) (
page 121)

120 NavigationNavigation main menuThe COMAND calculates the route as
Fastest route.
Including or avoiding traffic routes
In the Navigation main menu
(page 118), press the
Mode
soft key.
The Mode
menu will appear.Selectable traffic routes

Minimize Freeways
:
The system calculates the route with/
without minimizing freeways.

Min. Ferry/Auto-Train
:
The system calculates the route with/
without minimizing ferry connections
or railfreight.

Minimize Toll Roads
:
The system calculates the route with/
without minimizing toll roads.

Minimize Tunnels
:
The system calculates the route with/
without minimizing tunnels.

Use g or G to select a traffic route.

Press E.
Switches the option on or off. You can
switch on more than one option.

Press the
Back
soft key to confirm.
The setting is saved. The Navigation
main menu will appear.
Setting the route mode
Option
Symbol
On
Q
Off
q

121 Navigation
Navigation main menu
You can set the following for the navigation
announcements:
Bass and treble control (
page 121)

Balance/fader (
page 121)

Volume (
page 122)

In the Navigation main menu
(page 118), press the
Setting
soft
key.
The Settings menu will appear.
The announcement
Navigation Is
Not Active
is made.Adjusting bass and treble

In the Settings menu, press the
Bass

or
Treble
soft key.

Press H or h.
You adjust bass or treble.

Press E or the
Back
soft key.
or

Wait until the display changes.
The new setting is saved. The
Navigation main menu appears.
Adjusting balance and fader

In the Settings menu, press the Bal/Fad
soft key.
Cross-hairs are displayed. The vertical
line indicates the fader setting. The
horizontal line indicates the balance
setting.

Press H or h.
Move the cross-hairs horizontally and
adjust the balance.
or

Press g or G.
Move the cross-hairs vertically and
adjust the fader.
Audio settings for the navigation
announcements
iBalance defines the sound center
left/right
Fader defines the sound center
front/backiUse F and f to move the cross-
hairs diagonally.