parking sensors MERCEDES-BENZ CL-Class 2008 C216 Comand Manual

471 Controls in detail
Driving systems
Collision warning
Park Assist can detect obstacles from a
considerable distance. If you drive in re-
verse towards an obstacle, you will hear a
warning tone. You must then brake in or-
der to avoid a collision. The warning tone
for a collision will not sound when the vehi-
cle is at a standstill very close to the obsta-
cle. In this case, you will hear a
corresponding tone for the warning indica-
tor in the rear area.
Switching Park Assist system on/off
The Park Assist system can be switched off
manually.
The Park Assist button with the indicator
lamp is located on the control panel on the
right-hand side of the instrument cluster.1Park Assist button
2Indicator lamp

Switching off Park Assist system:
Press button 1.
Indicator lamp 2 comes on.

Switching on Park Assist system:
Press button 1 again.
Indicator lamp 2 goes out.
Advanced Parking Guidance*
Advanced Parking Guidance is an electron-
ic parking aid equipped with radar sensors
that scan the area on both sides of vehicle.
When suitable parking space is found it is
shown in the display and you receive steer-
ing instructions for parking in that space.
i
During strong rainfall, the collision warning
may be triggered, for example, by water splash-
ing into the area of the sensors.
i
When the indicator lamp is illuminated, the
Park Assist system is switched off.
i
The Park Assist system is automatically
switched on when the ignition (
page 365) and
radar sensors are switched on (page 302).
Warning!
G
Advanced Parking Guidance is only an aid
and may display parking spaces that are not
suitable e.g. due to parking regulations, un-
suitable road/ground surfaces, driveways,
entrances/exits, etc.


472 Controls in detailDriving systemsAdvanced Parking Guidance only shows a
representation of the parking space in the
instrument cluster display as parking space
is first initially measured when driving past.
Subsequent changes to the parking space
are not taken into account, e.g. if the posi-
tion of the vehicle parked in front of or be-
hind the space changes or objects in the
parking space are moved. Moving objects
are not shown, e.g. pedestrians or vehicles
driving past. Advanced Parking Guidance
does not relieve you of the responsibility to
pay attention. If you only rely on Advanced
Parking Guidance, you may cause an acci-
dent and injure yourself and others.
You are always responsible for safety and
must continue to pay attention to your im-
mediate surroundings when parking and
maneuvering.
Warning!
G
Make sure no persons or animals are in the
area in which you are maneuvering. You
could otherwise injure them.!
Special attention must be paid to objects
with smooth surfaces or low silhouettes (e.g.
trailer couplings, painted posts, elevated cross-
bars or road curbs). Such objects may not be de-
tected by the system and can damage the
vehicle.
i
USA only:
This device has been approved by the FCC as a
“Vehicular Radar System”. The radar sensor is
intended for use in an automotive radar system
only. Removal, tampering, or altering of the de-
vice will void any warranties, and is not permitted
by the FCC. Do not tamper with, alter, or use in
any non-approved way.
Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.
i
Canada only:
This device complies with RSS-210 of Industry
Canada. Operation is subject to the following
two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference re-
ceived, including interference that may
cause undesired operation of the device.
Removal, tampering, or altering of the device will
void any warranties, and is not permitted. Do not
tamper with, alter, or use in any non-approved
way.
Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.
!
The operation and functionality of the Ad-
vanced Parking Guidance* can be affected or im-
paired by dirty sensors, especially at times of
snow and ice.
Make sure that the area on the bumpers around
the sensors is free of dirt, ice and/or slush, oth-
erwise Advanced Parking Guidance* may not
function properly, see “Cleaning the driving sys-
tems sensors” (
page 601).


485 Controls in detail
Driving systems
Blind Spot Assist*
Depending on production date, your vehi-
cle may not be equipped with this feature.
Blind Spot Assist uses radar sensors to
monitor the area on both sides of your ve-
hicle. It will assist you when you change
lanes driving at speeds of above 20 mph
(30 km/h). A warning will appear on the
outside rear view mirror as soon as anoth-
er vehicle is detected in the area being
monitored. If you then activate the corre-
sponding turn signals to change lanes, you
will see and hear a collision warning. Blind
Spot Assist operates using two sensors in
the front bumper and four sensors in the
rear bumper.In order for Blind Spot Assist to function,
the radar sensors must be switched on and
operational.
When travelling in Canada in a vehicle not
registered in Canada, you must switch off
the radar sensor system* (
page 302).
Canadian law does not permit the use of
the radar sensor system* (
page 302) for
vehicles from outside of Canada. When you
switch off the radar sensor system*, the
following functions are deactivated:


BAS Plus* (
page 68)


PRE-SAFE
® Brake* (
page 75)


DISTRONIC Plus* (
page 443)


Park Assist (
page 467)


Advanced Parking Guidance*
(page 471)


Blind Spot Assist* (
page 485)
Warning!
G
Blind Spot Assist is only a driving aid and
may not detect all vehicles. It is the driver’s
responsibility at all times to be attentive to
road, weather and traffic conditions and to
provide the steering, braking and other
driving inputs necessary to retain control of
the vehicle. Failure to do so could result in
recognizing dangers too late, possibly re-
sulting in an accident and serious injury to
yourself and others.
Warning!
G
Blind Spot Assist cannot detect road and
traffic conditions.
Blind Spot Assist may not be able to detect
narrow vehicles such as motorcycles or bi-
cycles, or it may not detect them until it is
too late.
The monitoring function may be impaired if
your sensors are dirty, subject to heavy
spray, or if visibility is poor due to e.g. snow,
rain, or fog. This can result in vehicles not
being detected or being detected too late.
It is the driver’s responsibility at all times to
be attentive to road, weather and traffic con-
ditions and to provide the steering, braking
and other driving inputs necessary to retain
control of the vehicle. Failure to do so could
result in recognizing dangers too late, possi-
bly resulting in an accident and serious inju-
ry to yourself and others.

601 Operation
Vehicle care
Cleaning the driving systems sensors
The sensors are integrated in the front and
rear bumpers and cannot be seen from the
outside. They work with the following sys-
tems:

BAS Plus*


PRE-SAFE
® Brake*


Blind Spot Assist*


Park Assist*


Advanced Parking Guidance*
1Bumper area near sensors

Switch off the ignition (
page 365).

Use a mild car wash detergent, such as
Mercedes-Benz approved Car Sham-
poo, with plenty of water and a soft,
non-scratching cloth to clean the
bumper area near sensors.
!
To prevent scratches or damage to the sur-
face, never apply strong force and only use a
soft, non-scratching cloth when cleaning the
bumper area near sensors. Do not attempt to
wipe a dirty bumper with a dry cloth or sponge.

632 Practical hintsWhat to do if …?Display
Possible cause/consequence
Possible solution
Next Service X
Due in ... days
Due in ... mls (km)
Service X must be carried out in ... days or
after ... miles (kilometers) (
page 592).

Have the maintenance service carried out by an authorized
Mercedes-Benz Center.
Only Shift to
Position 'P' When
Vehicle Is Stationary
You have tried to Shift the automatic trans-
mission to park positionP using the gear
selector lever although the vehicle is still in
motion.

Stop your vehicle as soon as it is safe to do so.

Shift the automatic transmission to park positionP.

Engage the electronic parking brake (
page 412).
Park Assist
Currently Unavailable
See Oper. Manual
Park Assist* is deactivated because the
area around the sensors* in the front or
the rear bumper (
page 601) is dirty.

Clean the front and rear bumper (
page 601).
Park Assist* is deactivated because the
battery voltage is insufficient.

Have the battery checked by an authorized Mercedes-Benz
Center.
Park Assist* is switched off because the
radar sensor system* is temporarily inop-
erative due to electromagnetic interfer-
ence near television and radio transmitter
stations, toll stations, speed measuring
systems, etc.

Wait until the message in the multifunction display disappears.
Park Assist
Inoperative
Park Assist* is unavailable due to a mal-
function.

Contact an authorized Mercedes-Benz Center as soon as
possible.

634 Practical hintsWhat to do if …?Display
Possible cause/consequence
Possible solution
Parking Guidance
Currently Unavailable
See Oper. Manual
Advanced Parking Guidance* is deactivat-
ed because the area around the sensors*
in the front or the rear bumper
(page 601) is dirty.

Clean the front and rear bumper (
page 601).
Advanced Parking Guidance* is deactivat-
ed because the battery voltage is insuffi-
cient.

Have the battery checked by an authorized Mercedes-Benz
Center.
Advanced Parking Guidance* is switched
off because the radar sensor system* is
temporarily inoperative due to electromag-
netic interference near television and radio
transmitter stations, toll stations, speed
measuring systems, etc.

Wait to see if the interference is temporary or do not use Ad-
vanced Parking Guidance*. Try in a location where the inter-
fering transmission might not be present.
Parking Guidance
Canceled
Advanced Parking Guidance* has been
canceled because:

the vehicle is sliding


the bumper became dirty in the area of
the sensors (
page 601)


there has been a malfunction

Use Advanced Parking Guidance* again later.
If the parking space symbol is not shown in the multi-function dis-
play at a speed below 10 mph (16 km/h):

Clean the bumpers (
page 601).
or

Restart the engine.
or

Contact an authorized Mercedes-Benz Center.

635 Practical hints
What to do if …?
Display
Possible cause/consequence
Possible solution
Parking Guidance
Finished
Advanced Parking Guidance* The vehicle is
in the end position.
The display message disappears automatically.
PRE-SAFE
Inoperative
See Oper. Manual
PRE-SAFE
® itself has failed. All other occu-
pant safety systems, such as the air bags,
are still available.

Contact an authorized Mercedes-Benz Center as soon as
possible.
Radar Sensors
Deactivated
See Oper. Manual
You attempt to activate DISTRONIC Plus*,
Park Assist* or PRE-SAFE
® Brake* even
though you have switched off the radar sen-
sors* on the vehicle.

Check if the radar sensors* may be switched on (
page 302).

Switch on the radar sensors* using the instrument cluster
control system.
Service X
Due
Your vehicle is due for maintenance service
(page 592).

Have the maintenance service carried out by an authorized
Mercedes-Benz Center.
Service X Exceeded
by X days
by XXX mls (km)
Service X must be carried within the next ...
or before you have driven ... miles (kilome-
ters).

Have the maintenance service carried out by an authorized
Mercedes-Benz Center as soon as possible.
!
Failure to have the vehicle maintained in ac-
cordance with the Maintenance Booklet and
maintenance service indicator at the designated
times/mileage will result in vehicle damage not
covered by the Mercedes-Benz Limited
Warranty. For more information, see “Mainte-
nance” (
page 592).

757 Index
P
Paintwork, Cleaning 597
Panic alarm
Audible alarm and flashing
exterior lamps 64
Panic button 64
Parcel net in front passenger
footwell 511
Park Assist* 467
Cleaning system sensors 601
Messages in display 632, 634
System sensors 601
Warning indicators 31, 470
Parking 412, 542
Parking and standing lamps
Replacing bulbs 689
Parking position
Exterior rear view mirrors 384
Parktronic* 463
Cleaning system sensors 600
Malfunctioning 467
System sensors 600
Warning indicators 31, 465
Parts service 720PASS AIR BAG OFF indicator lamp see
Front passenger front air bag off
indicator lamp
Passenger compartment 547
Passenger safety see Occupant safety
PCMCIA card
Ejecting (COMAND) 118
Loading (COMAND) 117
Pedals 539
Plastic parts, cleaning 604
POIs 225
Poly-V-belt drive 724
Layout 724
Potential problems associated with
underinflated and overinflated
tires 576
Power assistance 539
Power closing assist for doors and
trunk lid 363
Power folding exterior rear view
mirrors 382
Power seats
Folding back front seat
backrests 371
Folding forward front seat
backrests 371Power tilt/sliding sunroof 506
Opening/closing 506
Synchronizing 508
Power washer 596
Power windows 402
Cleaning 603
Opening/closing 402
Rear side windows,
Blocking operation 63
Practical hints 622, 681
Premium unleaded gasoline 551, 735,
737
PRE-SAFE
®
56
Message in display 635
Messages in display 642
PRE-SAFE
® Brake*
Intermittent signal tone 77
Preventive occupant safety see PRE-SAFE
®
Problems
While driving 411
With vehicle 21
Product information 13
Production options weight 587
Program mode see Automatic
transmission, Automatic shift program