sensor MERCEDES-BENZ CL-Class 2008 C216 Comand Manual

Page 634 of 769

633 Practical hints
What to do if …?
Display
Possible cause/consequence
Possible solution
Blind Spot Assist
Currently Unavailable
See Oper. Manual
Blind Spot Assist* is deactivated because
the area around the sensors* in the front
or the rear bumper (
page 601) is dirty.

Clean the front and rear bumper (
page 601).
Blind Spot Assist* is deactivated because
the battery voltage is insufficient.

Have the battery checked by an authorized Mercedes-Benz
Center.
Blind Spot Assist* is switched off because
the radar sensor system* is temporarily in-
operative due to electromagnetic interfer-
ence near television and radio transmitter
stations, toll stations, speed measuring
systems, etc.

Wait until the message in the multifunction display disappears.
Blind Spot Assist
Inoperative
Blind Spot Assist* is unavailable due to a
malfunction.

Contact an authorized Mercedes-Benz Center as soon as
possible.

Page 635 of 769

634 Practical hintsWhat to do if …?Display
Possible cause/consequence
Possible solution
Parking Guidance
Currently Unavailable
See Oper. Manual
Advanced Parking Guidance* is deactivat-
ed because the area around the sensors*
in the front or the rear bumper
(page 601) is dirty.

Clean the front and rear bumper (
page 601).
Advanced Parking Guidance* is deactivat-
ed because the battery voltage is insuffi-
cient.

Have the battery checked by an authorized Mercedes-Benz
Center.
Advanced Parking Guidance* is switched
off because the radar sensor system* is
temporarily inoperative due to electromag-
netic interference near television and radio
transmitter stations, toll stations, speed
measuring systems, etc.

Wait to see if the interference is temporary or do not use Ad-
vanced Parking Guidance*. Try in a location where the inter-
fering transmission might not be present.
Parking Guidance
Canceled
Advanced Parking Guidance* has been
canceled because:
the vehicle is sliding

the bumper became dirty in the area of
the sensors (
page 601)

there has been a malfunction

Use Advanced Parking Guidance* again later.
If the parking space symbol is not shown in the multi-function dis-
play at a speed below 10 mph (16 km/h):

Clean the bumpers (
page 601).
or

Restart the engine.
or

Contact an authorized Mercedes-Benz Center.

Page 636 of 769

635 Practical hints
What to do if …?
Display
Possible cause/consequence
Possible solution
Parking Guidance
Finished
Advanced Parking Guidance* The vehicle is
in the end position.
The display message disappears automatically.
PRE-SAFE
Inoperative
See Oper. Manual
PRE-SAFE
® itself has failed. All other occu-
pant safety systems, such as the air bags,
are still available.

Contact an authorized Mercedes-Benz Center as soon as
possible.
Radar Sensors
Deactivated
See Oper. Manual
You attempt to activate DISTRONIC Plus*,
Park Assist* or PRE-SAFE
® Brake* even
though you have switched off the radar sen-
sors* on the vehicle.

Check if the radar sensors* may be switched on (
page 302).

Switch on the radar sensors* using the instrument cluster
control system.
Service X
Due
Your vehicle is due for maintenance service
(page 592).

Have the maintenance service carried out by an authorized
Mercedes-Benz Center.
Service X Exceeded
by X days
by XXX mls (km)
Service X must be carried within the next ...
or before you have driven ... miles (kilome-
ters).

Have the maintenance service carried out by an authorized
Mercedes-Benz Center as soon as possible.
!
Failure to have the vehicle maintained in ac-
cordance with the Maintenance Booklet and
maintenance service indicator at the designated
times/mileage will result in vehicle damage not
covered by the Mercedes-Benz Limited
Warranty. For more information, see “Mainte-
nance” (
page 592).

Page 637 of 769

636 Practical hintsWhat to do if …?Display
Possible cause/consequence
Possible solution
Shift to P or N
to Start Engine
You have attempted to start the engine
while the automatic transmission was set to
reverse gearR or drive positionD.

Shift the automatic transmission to park position P or neutral
positionN (
page 417).
Tire Pressure Monitor
Inoperative
The Advanced TPMS or a wheel sensor is
malfunctioning.

Have the Advanced TPMS checked by an authorized
Mercedes-Benz Center.
Tire Pressure Monitor
Inoperative
No Wheel Sensors
The Advanced TPMS is deactivated because
wheels without proper sensors were in-
stalled.

Have the wheel sensors installed by an authorized
Mercedes-Benz Center.
As soon as all wheels with sensors have been mounted, the
Advanced TPMS is switched back on after driving for several
minutes.

Page 638 of 769

637 Practical hints
What to do if …?
Display
Possible cause/consequence
Possible solution
Tire Pressure Monitor
Currently Unavailable
The Advanced TPMS is unable to monitor
the tire inflation pressure due to:
a nearby radio interference source

the on-board voltage is too low

excessive wheel sensor temperatures
As soon as the causes for the malfunction are no longer present,
the Advanced TPMS automatically becomes active again after a
few minutes driving.
Warning!
G
Do not drive with a flat tire. A flat tire affects
the ability to steer or brake the vehicle. You
may lose control of the vehicle. Continued
driving with a flat tire will cause excessive
heat build-up and possibly a fire.
Follow recommended tire inflation pres-
sures.
Do not underinflate tires. Underinflated tires
wear excessively and/or unevenly, adverse-
ly affect handling and fuel economy, and are
more likely to fail from being overheated. Do
not overinflate tires. Overinflated tires can
adversely affect handling and ride comfort,
wear unevenly, increase stopping distance,
and result in sudden deflation (blowout) be-
cause they are more likely to become punc-
tured or damaged by road debris, potholes
etc.

Page 646 of 769

645 Practical hints
What to do if …?
Display
Possible cause/consequence
Possible solution
Service
See Oper. Manual
CL 600 and CL 65 AMG only:
The brake system sensors are malfunction-
ing. The brake system continues to function
normally with full brake force boost.

Continue driving with added caution.

Have the system checked at an authorized
Mercedes-Benz Center as soon as possible.
(USA only)(Canada only)
Check
Brake Pad Wear
The brake pads have reached their wear
limit.

Have the brake pads replaced as soon as
possible.
!
Brake pad thickness must be visually
checked by a qualified technician at the intervals
specified in the Maintenance Booklet.

Page 665 of 769

664 Practical hintsWhat to do if …?Display
Possible cause/consequence
Possible solution
Check
Center Brake Lamp
The high mounted brake lamp is malfunc-
tioning. This message will only appear if all
light emitting diodes have stopped working.

Contact an authorized Mercedes-Benz
Center as soon as possible.
Check Left
Cornering Light
The left-hand corner-illuminating lamp is
malfunctioning.

Replace the bulb as soon as possible
(page 688).
Check Right
Cornering Light
The right-hand corner-illuminating lamp is
malfunctioning.

Replace the bulb as soon as possible
(page 688).
Check
Left Low Beam
The left low beam lamp is malfunctioning.

Contact an authorized Mercedes-Benz
Center as soon as possible.
Check
Right Low Beam
The right low beam lamp is malfunctioning.

Contact an authorized Mercedes-Benz
Center as soon as possible.
Active Headlamps
Inoperative
The active headlamps are malfunctioning.

Contact an authorized Mercedes-Benz
Center as soon as possible.
Auto Lamp Function
Inoperative
The light sensor is malfunctioning. Daytime
driving lamps are switched on.

Contact an authorized Mercedes-Benz
Center as soon as possible.
To switch off the headlamps (U.S. vehicles only):

Switch off daytime running lamps in the in-
strument cluster control system
(page 301).

Turn the exterior lamp switch to position0
(page 391).

Page 680 of 769

679 Practical hints
What to do if …?
Display
Possible cause/consequence
Possible solution
Wheel Sensor(s)
Missing
One or more sensors malfunction (e.g. bat-
tery in one or more wheel sensor is empty).
One or more wheels without wheel sensors
mounted (e.g. spare tire).
No pressure value is shown on the multi-
function display for the tire in question.

Have the Advanced TPMS checked by an
authorized Mercedes-Benz Center.

Have the wheel sensors installed by an
authorized Mercedes-Benz Center.
The tire pressure for the respective tire is
shown in the multifunction display after a few
minutes driving.
Tire Pressure
Please Rectify
Advanced TPMS:
The pressure is too low in one or more tires.
Or the tire pressures of the individual
wheels differ too radically from one
another.

Check and adjust tire inflation pressure as
required (
page 575).

Page 702 of 769

701 Practical hints
Flat tire
Lowering the vehicle
Lower vehicle by turning crank coun-
terclockwise until vehicle is resting ful-
ly on its own weight.

Remove the jack.
1 - 5 Wheel bolts6 Wheel wrench

Tighten the five wheel bolts evenly,
following the diagonal sequence
illustrated (1 to 5), until all bolts are
tight. Observe a tightening torque of
110 lb-ft (150 Nm).

Fully collapse the jack, with handle
folded in (storage position),
(page 682).

Store the jack and the other vehicle
tools in the designated storage space
underneath the trunk floor.Warning!
G
Have the tightening torque checked after
changing a wheel. The wheels could come
loose if they are not tightened to a torque of
110 lb-ft (150 Nm).i
Do not activate the tire inflation pressure
monitor (
page 572) until a full size wheel/tire
with functioning sensor has been placed back
into service on the vehicle.

Page 748 of 769

747 Index
Corner-illuminating lamps 395
Courtesy lighting 399
Cruise control 437
Activating 438
Canceling 439
Driving downhill 439
Driving uphill 439
Message in display 624
Setting current speed 439
Setting to last stored speed
(“Resume” function) 442
Cup holder
In front seat armrest 513
In rear seat armrest 513
Curb weight 586D
Date
Setting (COMAND) 257
Daytime running lamp mode 393
Setting 301
Deceleration
With DISTRONIC Plus* 447
Deep water see Standing water
Defrosting 494
Delayed switch-off
Exterior lighting (COMAND) 260
Interior lighting (COMAND) 266
Department of Transportation see DOT
Destination entry (COMAND) 198
Destination memory (COMAND) 247
Difficulties
While driving 411
While starting 408
Digital speedometer 287
Additional speedometer 301
Dimensions, Vehicle 732
Direction of rotation, Tires 564Displays
Additional speedometer 301
Digital speedometer 287
DISTRONIC Plus* 446
Maintenance service indicator 592
Multifunction display 282
Vehicle status message see
Multifunction display messages
Distance
Decreasing in DISTRONIC Plus* 458
Increasing in DISTRONIC Plus* 458
Setting in DISTRONIC Plus* 457
Distance to Empty (Range) 287
Distance warning lamp* 31, 614
DISTRONIC Plus* 443
Activated 448
Activating 449
Calling up settings 448
Cleaning system sensor 599
Deactivated 448
Deactivating 456
Deceleration 447
Decreasing distance 458
Decreasing time interval 457
Displays in the multifunction
display 446

Page:   < prev 1-10 ... 11-20 21-30 31-40 41-50 51-60 61-70 next >