MERCEDES-BENZ CLA COUPE 2022 Owners Manual

Page 221 of 529

Functions of ABS
The Anti-lock Brake System (ABS) regulates the
br
ake pressure in critical driving situations:
= During braking, for instance, at maximum full-
stop braking or if there is insuPcient tyre trac-
tion, the wheels are prevented from locking.
= Vehicle steerability while braking is ensured.
If ABS intervenes when braking, you will feel a
pulsing in the brake pedal. The pulsating brake
pedal can be an indication of hazardous road con-
ditions and can serve as a reminder to take extra
care while driving.
System limits
= ABS is active from speeds of approx. 5 km/h.
= ABS may be impaired or may not function if a
malfunction has occurred and the yellow %
ABS warning lamp lights up continuously aser
the vehicle is started. Function of BAS
&
WARNING Risk of an accident caused b y a
malfunction in BAS (Brake Assist System)
If BAS is malfunctioning, the braking distance
in an emer
gency braking situation is
increased. 
Depress the brake pedal with full force in
emer

gency braking situations. ABS pre-
vents the wheels from locking. The Brake Assist System (BAS) supports your
emer
gency braking situation with additional brake
force.
If you depress the brake pedal quickly, BAS is
activated:
= BAS automatically boosts the brake pressure.
= BAS can shorten the braking distance.
= ABS prevents the wheels from locking.
The brakes will function as usual once you release
the brake pedal. BAS is deactivated. Functions of ESP
n &
WARNING Risk of skidding if ESP n
is
deactiv
ated
If you deactivate ESP n
, ESP n
canno
t carry out
vehicle stabilisation. 
ESP n
should onl
y be deactivated in the
following situations. *
NOTE Mer
cedes-AMG vehicles 
Observe the notes in the Supplement.
Y
ou could otherwise fail to recognise
dangers. The Electronic Stability Program (ESP
n
) can moni-
t
or and improve driving stability and traction in
the following situations within physical limits:
= When pulling away on wet or slippery carriage-
ways.
= When braking. 218
Driving and parking

Page 222 of 529

If the vehicle deviates from the direction desired
b y the driver, ESP n
can stabilise the vehicle by
intervening in the following ways:
= One or more wheels are braked.
= The engine output is adapted according to the
situation.
ESP n
is deactivated if the

Page 223 of 529

=
The v ehicle is stabilised by means of individual
brake application on one side. Function of ESP
n
tr
ailer stabilisation&
WARNING Risk of accident in poor r
oad
and weather conditions
In poor road and weather conditions, the
tr
ailer stabilisation cannot prevent lurching of
the vehicle/trailer combination. Trailers with a
high centre of gravity may tip over before
ESP n
detects this. 
Always adapt your driving style to suit
t

he current road and weather conditions. When driving with a trailer, ESP
n
can s
tabilise
your vehicle if the trailer begins to swerve from
side to side:
= ESP n
trailer stabilisation is active above
speeds of 65 km/h.
= Slight swerving is reduced by means of a tar-
geted, individual brake application on one
side. =
In t
he event of severe swerving, the operating
energy output is also reduced and all wheels
are braked.
ESP n
trailer stabilisation may be impaired or may
not function if:
= The trailer is not connected correctly or is not
detected properly by the vehicle. Activating/deactivating ESP
n
(Electr
onic Stability
Program) Multimedia system:
4 © 5
Settings 5
Quick access
% ESPn
can onl
y be activated/deactivated using
quick access when at least one other function
is available in quick access. ESP n
can other-
wise be found in the Assistance menu.
* NOTE Mer
cedes-AMG vehicles 
Observe the notes in the Supplement.
Y
ou could otherwise fail to recognise
dangers. 
Select ESP. 
Select On or

Page 224 of 529

Function of STEER CONTROL
STEER CONTROL assists you by transmitting a
no
ticeable steering force to the steering wheel in
the direction required for vehicle stabilisation.
This steering recommendation is given in the fol-
lowing situations:
= both right wheels or both les wheels are on a
wet or slippery road surface when you brake
= the vehicle starts to skid
System limits
STEER CONTROL may be impaired or may not
function in the following situations:
= ESP n
is deactivated.
= ESP n
is malfunctioning.
= The steering is malfunctioning.
If ESP n
is malfunctioning, you will be assisted fur-
ther by the electric power steering. HOLD function
HOLD function
The HOLD function holds t
he vehicle at a stand-
still without requiring you to depress the brake
pedal, e.g. while waiting in traPc.
The HOLD function is only an aid. The responsibil-
ity for the vehicle safely standing still remains with
the driver.
System limits
The HOLD function is only intended to provide
assistance when driving and is not a suPcient
means of safeguarding the vehicle against rolling
away when stationary.
= The incline must not be greater than 30%. Activating/deactivating the HOLD function &
WARNING Risk of an accident due t o the
HOLD function being active when you
leave the vehicle
If the vehicle is only braked with the HOLD
function it could, in t
he following situations,
roll away:
= If there is a malfunction in the system or in
the power supply.
= If the HOLD function is deactivated by
depressing the accelerator pedal or brake
pedal, e.g. by a vehicle occupant. 
Always secure the vehicle against rolling
a
way before you leave it. Requirements:
= The v

ehicle is stationary.
= The driver's door is closed or the seat belt on
the driver's side is fastened.
= The vehicle has been started or has been
automatically switched oM by the ECO start/
stop function. Driving and parking
221

Page 225 of 529

=
The electr ic parking brake is released.
= Active Distance Assist DISTRONIC is deactiva-
ted.
= The transmission is in position h, k or i.
(Vehicles with automatic transmission)
Activating the HOLD function 
Depress the brake pedal, and aser a shor
t
time quickly depress further until the

Page 226 of 529


Swisly move your foot from the brake
pedal to the accelerator pedal. Do not
leave the vehicle when it is being held by
Hill Start Assist. Function of Adaptive Brake Lights
Adaptive Brake Lights warn following
tr
aPc in an
emergency braking situation with the following
actions:
= Oashing the brake lamps
= activating the hazard warning lights
( page 134)
If the vehicle is braked sharply from speeds above
50 km/h, the brake lamps Oash rapidly. This pro-
vides traPc travelling behind you with an even
more noticeable warning. Start-oM
assis
t Function of the s

tart-oM assist
The start-oM assist enables optimal vehicle accel-
eration from a standstill. For this, a suitably high- grip road surface is required, the tyres and vehicle
mus

t also be in good condition.
Do not activate the start-oM assist on public
roads.
Be sure to observe the safety notes and informa-
tion on ESP n
( page 218).
Activating the start-oM assist &
WARNING Risk of skidding and ha
ving an
accident from wheels spinning
When you use s
tart-oM assist, individual
wheels could spin and you could lose control
of the vehicle.
If ESP n
is deactivated, there is a risk of skid-
ding and accident! 
Make sure that no persons or obstacles
ar
e in the close vicinity of your vehicle. 
Deactivating ESP n
( pag
e 220). 
Move the steering wheel to the straight-ahead
position. 
Depress the brake pedal Nr
mly with your les
foot and keep it depressed. 
Engage the h dr
ive position ( page 180). 
Select the sportiest available drive program
B or C(  pag

e 174). 
Rapidly depress the accelerator pedal fully. 
Take your foot oM t
he brake, but keep the
accelerator pedal depressed.
The vehicle pulls away at maximum accelera-
tion. 
Switch on ESP n
once t
he acceleration proce-
dure is complete. ESP n
will otherwise not be
able to stabilise the vehicle if the vehicle
starts to skid or a wheel starts to spin.
Cancelling the s
tart-oM assist 
Remove your foot from the accelerator pedal. 
Reactivate the ESP n
. ATTENTION ASSIST
Function of ATTENTION ASSIST
A

TTENTION ASSIST assists you on long, monoto-
nous journeys, e.g. on motorways and trunk Driving and parking
223

Page 227 of 529

roads. If ATTENTION ASSIST detects indicators of
f atigue or increasing lapses in concentration on
the part of the driver, it suggests taking a break.
ATTENTION ASSIST is only an aid. It cannot
always detect fatigue or lapses in concentration in
time. The system is not a substitute for a well-res-
ted and attentive driver. On long journeys, take
regular breaks in good time that allow for ade-
quate recuperation.
You can choose between two settings:
= Standard: normal system sensitivity.
= Sensitive: higher system sensitivity. The driver
is warned earlier and the attention level detec-
ted by ATTENTION ASSIST is adapted accord-
ingly.
If drowsiness or increasing lapses in concentra-
tion are detected, the ATTENTION ASSIST Take
a break! warning appears in the Instrument Dis-
play. You can acknowledge the message and take
a break where necessary. If you do not take a
break and ATTENTION ASSIST continues to detect
increasing lapses in concentration, you will be
warned again aser a minimum of 15 minutes. You can have the following status information for
A

TTENTION ASSIST displayed in the assistance
menu of the on-board computer:
= The length of the journey since the last break.
= The attention level determined by ATTENTION
ASSIST:
- the fuller the circle, the higher the atten-
tion level determined
- as your attention wanes, the circle in the
centre of the display becomes smaller
If ATTENTION ASSIST is unable to calculate the
attention level and cannot issue a warning, the
System suspended message appears. If a warning is given in the Instrument Display, the
multimedia sy
stem oMers to search for a rest
area. You can select a rest area and start naviga-
tion to this rest area. This function can be activa-
ted and deactivated in the multimedia system.
If ATTENTION ASSIST is deactivated, the Û
symbol appears in the assistance graphic in the
Instrument Display. Aser the vehicle is started,
ATTENTION ASSIST is automatically activated. The
last selected sensitivity level remains stored.
System limits
ATTENTION ASSIST is active in the 60 km/h to
200 km/h speed range.
Particularly in the following situations, ATTENTION
ASSIST only functions in a restricted manner and
warnings may be delayed or not occur:
= If you have been driving for less than approx-
imately 30 minutes.
= If the road condition is poor (uneven road sur-
face or potholes).
= If there is a strong side wind.
= If you adopt a sporty driving style (high corner-
ing speeds or high rates of acceleration). 224
Driving and parking

Page 228 of 529

=
If A ctive Steering Assist is activated and active
( page 234).
= If the time has been set incorrectly.
= If you change lanes and vary your speed fre-
quently in active driving situations.
The ATTENTION ASSIST drowsiness or alertness
assessment is reset and restarted when continu-
ing the journey in the following situations:
= If you switch oM the vehicle.
= If you unfasten your seat belt and open the
driver's door (e.g. to change drivers or take a
break).
Setting ATTENTION ASSIST
Multimedia system:
4 © 5
Settings 5
Assistance
5 Attention Assist
Setting options 
Select Standard, Sensitive or Off.
Suggesting a rest area 
Select Suggest rest area . 
Activate or deactivate the function.
If A TTENTION ASSIST detects fatigue or
increasing lack of attention, it suggests a rest
area in the vicinity. 
Select the suggested rest area.
Y
ou are guided to the selected rest area. Cruise control and limiter
Function of cruise control
Cr

uise control regulates the speed to the value
selected by the driver.
If you accelerate to overtake, forexample, the
stored speed is not deleted. If you remove your
foot from the accelerator pedal aser overtaking,
cruise control will resume speed regulation back
to the stored speed.
You can store any speed above 20 km/h up to the
maximum design speed or up to the set winter
tyre limit.
Observe the notes on driving systems and your
responsibility; you may otherwise fail to recognise
dangers (  page 216). Mercedes!

Page 229 of 529

Do not use cruise control in the following situa-
tions:
= in tr
aPc situations which require frequent
changes of speed, e.g. in heavy traPc, on
winding roads
= on slippery roads. Accelerating can cause the
drive wheels to lose traction and the vehicle
could then skid.
= when visibility is poor
Function of the limiter
The limiter restricts the speed of the vehicle. To
reduce the speed to the set speed, the limiter
applies the brakes automatically.
You can limit the speed as follows:
= Variable: for a short-term speed restriction,
e.g. in built-up areas
= Permanent: for a longer-term speed restric-
tion, e.g. in winter tyre mode
You can store any speed above 20 km/h up to the
maximum design speed or up to the set winter
tyre limit. You can also perform settings while the
vehicle is stationary if the vehicle has been star-
ted. Observe the notes on driving systems and your
r esponsibility; you may otherwise fail to recognise
dangers ( page 216).
Mercedes!

Page 230 of 529

Variable limiter
= The v
ariable limiter is selected. 
To operate cruise control or the variable lim-
it

er: press the rocker switch on the steering
wheel control unit up or down to the desired
position.
Switching between cruise control and the varia-
ble limit
er 
To select cruise control: select J wit
h the
right rocker switch. 
To select the variable limiter: select

Page:   < prev 1-10 ... 181-190 191-200 201-210 211-220 221-230 231-240 241-250 251-260 261-270 ... 530 next >