display MERCEDES-BENZ CLK-Class 2005 W203 Comand Manual

130 NavigationDuring route guidance
Press the
Back
soft key to confirm and
return to the map.
Setting map view

In the Settings menu (
page 128),
press the
View
soft key.
The available options are displayed.You can select the following map
orientations:

Heading UpDynamic map alignment, map is
displayed facing driving direction
pointing up

North UpMap is displayed facing north
Changing map view

Use the joystick to g or G to select
the deactivated option.

Press E.
The orientation is changed.

Press the
Back
soft key to confirm and
return to the map.Switching the GPS info setting on/off
When the GPS info setting is active, the
following data are displayed on the status
bar:

your current position in the form of
coordinates

the number of satellites currently
received

the height above the sea level
Option
Symbol
On
_
Off
-
iA symbol is shown on the bottom left
side of the status bar.
North symbol Y:
Map is displayed facing north

Compass symbol <:
Dynamic map alignment, map is
displayed facing driving direction
pointing up

131 Navigation
During route guidance

In the Settings menu (
page 128),
press the
GPS
soft key.
The options On
and
Off
are displayed.
The symbol _ indicates the present
setting.

Use the joystick to g or G to select
the option with the symbol -.

Press button E.
Depending on the previous setting, the
GPS is switched on or off.

Press the
Back
soft key to confirm and
return to the map.
Automatic map toggling
You can set the change from map to split
view.

In the Settings menu (
page 128),
press the
Automap
soft key.
The available options are displayed.
You can select the following options:

AutomaticThe system automatically switches to
split view whenever it announces a
driving maneuver.
When the driving maneuver is
completed, the system reverts to the
full view.
i
Map
Shows the full screen as a map.

Split screen
Uses the right hand part of the
screen to show maneuver icons
and/or intersection zooms.

132 NavigationDuring route guidance
ManualIf you choose this option, the system
only switches to split screen by
pressing c.
The symbol _ indicates the present
setting.

Move the E joystick in g or G
direction to select the option with the
symbol -.

Press button E.
The option is changed.

Press the
Back
soft key to confirm and
return to the map.Trail settings
With this function is active, the COMAND
records a trail every time the vehicle is in
an OFF ROAD area (more than 0.25 miles
away from a digitized road).
The system places trail dots on the screen
until it matches to a digitized road again.

In the Settings menu (
page 128),
press the
Trail
soft key.
The options
On
and
Off
are displayed.
1Percentage of used memoryThe symbol _ indicates the present
setting.

Move the E joystick in g or G
direction to select the option with the
symbol -.

Press E.
Depending on the previous setting, the
Trail is switched on or off.

Press the
Back
s o f t k e y t o c o n f i rm a nd
return to the map.
Delete a trail
If there is a trail in memory, you can delete
it.

Press the
Clear
soft key.
The message
Are you sure you
want to clear all trails?
will
appear in a window.

134 NavigationLast destinations and destination memory

Last destinations and destination memoryThe
Last destinations
memory
automatically saves last destinations to
which you have started route guidance.
The memory can save a maximum of 50
destinations.
You can save your current position as a
destination in the memory (page 99).
Such destinations are marked with _.
Activating the last destination memory

Activate the Navigation main menu
(page 96).

Push the joystick to G to select menu
item
Last
destinations
.

Press E.
The last destinations list is displayed.
The most recent destination is at the
top of the list.Selecting a destination from the last
destinations memory

Push the joystick to G or g to
select an entry.

Use the
Page
soft keys to scroll page-
wise through the list (if available).Now you can

start route guidance to the selected
entry (
page 135)

add the selected entry to today’s plan
(page 144)

Press the
Plan
soft key.

save the selected entry in the
destination memory
To do this, press the
Save
soft key.
Further operation is explained in
chapter “Saving destination in the
destination memory” (
page 135)

view details on the selected entry (if
available)
Press the
Details
soft key.

delete the selected entry (
page 135)
Last destinations memoryiThe home address is not saved in the
last destinations memory.

136 NavigationLast destinations and destination memoryCreate a new name
Push the joystick to h, H, g or
G to select the characters. After each
selection, press E.

Push the joystick to F or f to
select characters diagonally.

Press E to confirm the entry.
The message
The address has
been saved as <name>
will appear.
After that, the Start route guidance
menu, the
Last destinations

memory or the Today’s plan memory
reappear.Activating the destination memory

Activate the Navigation main menu
(page 96).

Push the joystick to g or G to
select menu item
Destination
memory
.

Press E.
The destination memory will appear.
The destination memory is sorted in
alphabetical order.Selecting a destination from the
destination memory
Activating the listing for the desired letter

Activate the destination memory.

Push the joystick to H or h until the
listing for the desired letter appears.
With every push of the joystick the
display changes to the next possible
letter.
or

Press 2 to 9 of the 12-button
keypad. Press a key once or several
times in quick succession until the
listing for the desired letter appears.iE.g.: Key 5
Press 1 x = access to listing for letter J
Press 2 x = access to listing for letter K
Press 3 x = access to listing for letter L

139 Navigation
POIs (Points of Interest)
Available soft keys
Name
soft key:
Brings you to the Enter POI menu
(
page 140).

Details
soft key:
Shows all information about the POI
category.

Page
V and
Page
v soft keys:
Use the
Page
V and
Page
v soft keys
to display the next or previous page.

Back
soft key:
Returns you to the previous menu.

Push the joystick to G or g to
select the desired POI category.

Press E.
The Find menu will appear.
Find menuYou can select between the following
menu items:
Sort by distance
:
The Select POI list will appear.

Within a city
:
The Enter city menu will appear
(
page 140). Select a Point of Interest
around any location.

By name
:
The Enter POI menu will appear
(
page 140).

Press E to confirm
Sort
by
distance
.
The Select POI list will appear.
Selecting a POI
Select POI listThe list shows the available POIs with
direction, distance and name. The nearest
POI is on top of the list.
Press the
Details
soft key if required.
Details on the POI are shown.

141 Navigation
POIs (Points of Interest)

Press c.
The full view of the map will appear.
Your current position and the special
destinations are indicated by symbols.

Press any soft key.
The soft key displays will appear.

If required, move the map pushing the
joystick to H, h, g, G,F or
f.

Press the
POIs
soft key.
One of the POI is spotlighted. The name
belonging to it is shown on the status
bar.

Use the
Next
or
Prev.
soft key
to select the desired POI.

Press the
Details
soft key if required.
Details on the POI selected are shown.

Press E.
The Start route guidance menu will
appear (
page 115).
Selecting a POI on the mapiYou can define which symbols will be
shown on the map (
page 129).

145 Navigation
Today’s plan
Available soft keys
Bestway
soft key:
Sortes entries to obtain the most
efficient route through all the
destinations (
page 145).

Rnd trip
soft key:
Sortes entries to obtain a route that
circles through all the destinations and
eventually ends at the starting position
(
page 145).

Del. all
soft key:
Deletes all entries.

Save
soft key:
Saves an entry to the destination
memory.

Details
soft key:
Shows the entry in full.

Page
V and
Page
v soft keys (if
available):
Use the
Page
V and
Page
v soft keys
to display the next or previous page.

Back
soft key:
Returns you to the previous menu.Best way

Press the
Bestway
soft key in the
today’s plan memory.
The today’s plan memory is sorted to
obtain the most efficient route through
all the destinations.
Round trip

Press the
Rnd trip
soft key in the
today’s plan memory.
The today’s plan memory is sorted to
obtain a route that circles through all
the destinations. The current vehicle location is placed
at the bottom of today’s plan as
Starting position
entry.
iThe Starting position can be represen-
ted by e.g. a parking lot or an off road
location.

146 NavigationToday’s planDisplay details for starting position
Push the joystick to G to select Starting position
.

Press the
Details
soft key.
The address information will appear.
Selecting a destination from the
today’s plan

Activate the today’s plan.

Push the joystick to G or g to
select an entry.

Use the
Page
soft keys to scroll page-
wise through the list (if available).

Press E.
The Start route guidance menu will
appear (
page 115).Saving a today’s plan entry in the
destination memory

Activate the today’s plan.

Press the
Save
soft key.
The Destination memory input menu
will appear (
page 135).
Deleting a today’s plan entry

Activate the today’s plan.

Push the joystick to G or g to
select an entry.

Press the
Delete
soft key.
A prompt message will appear.

Push the joystick to H to select
Yes
.
If you do not want to delete the entry:

Press E to confirm
No
.

Press E.
The system deletes the destination in
the today’s plan. The entries below the
destination deleted move up by one
position.Deleting all the today’s plan entries

Activate the today’s plan.

Press the
Del.
all
soft key.
A prompt message will appear.

Push the joystick to H to select
Yes
.
If you do not want to delete the entries:

Press E to confirm
No
.

Press E.
The system deletes all the destination
entries in the today’s plan.
iWhen you reach the destination, route
guidance ends and the system deletes
the today’s plan entry.

148 NavigationSoftware Updates1Ejecting DVD
2Opening/closing the display unit
3Warning message
Press EJECT to
close
You can update the system with a new
navigation DVD. The new DVD may include
new maps and/or new device software.Starting an update
DVDs are loaded and ejected at the
navigation module.

Switch the COMAND on (
page 27).Ejecting

Press l.
The display unit moves forward and
then tilts down. The DVD NAVIGATION
slot is visible.

Press the l button left of the
DVD NAVIGATION slot.
The navigation module ejects the DVD.
The message
No DVD in drive.
Please insert Navigation DVD.

will appear.

Remove the DVD from the slot.
Warning
G
The display unit can cause injury if
contacted when open. Please close after
inserting a navigation DVD. !Do not place anything on the lowered
display panel. Placing objects on the
lowered display panel may result in
damage to the display or COMAND
unit which is not covered by the
Mercedes-Benz Limited Warranty.
iUpdating may take several minutes.
During updating, the operation of
COMAND is restricted. You cannot
switch off the system.iThe navigation module is located
behind the display unit of the COMAND
(page 147).
iThere are two l buttons. One is on
the display unit 2. The other is located
left of the DVD NAVIGATION slot 1
behind the display.