display MERCEDES-BENZ CLK-Class 2005 W203 Comand Manual

80 Telephone*Telephone operationThe system detects an incoming call, the
phone rings.
Incoming calls are indicated in a window in
any system (e.g. radio).
The window shows:
the caller’s number if it is transmitted
or

the caller’s name if her or his name and
number are saved in the phone book or

Unknown
.Accepting a call

Press k.
or

Press E to confirm
accept
.
The display will change to the
call menu (
page 85). In the status
bar, the off-hook symbol will appear.
An active audio source will be muted.
You talk over the hands-free set.
Rejecting a call

Press K.
or

Push the joystick to H to highlight reject
and than press E.Setting the volume for hands-free ope-
ration
Raising the volume

Turn the rotary control on the e but-
ton to the right.
Lowering the volume

Turn the rotary control on the e but-
ton to the left.
Ending a call

Press K.
or

Press the
End
soft key.
Incoming call

83 Telephone*
Telephone operation
Selecting an entry from the Received
calls list
The COMAND automatically generates a
list of the last 10 calls received. The list is
sorted chronologically with the most
recently received call at the top of the list.
Displaying the list
In the Telephone menu (
page 78),
press the
Recvd#
soft key.
The list is displayed and the most
recently received call is highlighted.
Received calls listThe status bar shows:
the caller’s name if her or his name and
number are stored in the phone book

the message
Unknown
if no entry is
available

the telephone number
You can select the following functions:

Changing the list display

Selecting an entry and begin dialing

Ending a call (
page 82)Changing the list display

Press the
123
soft key.
The display changes to numbers.
or

Press the
ABC
soft key.
The display changes to names.
Selecting an entry and begin dialing

Push the joystick to g or G to
select the desired entry.

Press E.
or

Press k.
or

Press the
Send
soft key.
The telephone dials the number.

84 Telephone*Telephone operationSelecting an entry from the Dialed num-
bers list
The COMAND automatically generates a
list of the last 10 numbers dialed. The list
is sorted chronologically with the most
recently dialed number at the top of the
list.
Displaying the list
In the Telephone menu (
page 78),
press the
Dialed#
soft key.
The list is displayed and the most
recently dialed number is highlighted.
Dialed numbers listThe status bar shows:
the caller’s name if her or his name and
number are stored in the phone book

the message
Unknown
if no entry is
available

the telephone numberYou can select the following functions:

Changing the list display (
page 83)

Selecting an entry and begin dialing
(page 83)

Ending a call (
page 82)
Toggling between lists

Push the joystick to H or h to
select the desired list.
Missed calls
If there are one or more missed calls avai-
lable on the mobile phone, a correspon-
ding message will appear.

Press the
Back
soft key or press E to
return to the Telephone menu.

85 Telephone*
Telephone operation
Speed-dialing
For all memory locations
At the mobile phone you can save
telephone numbers in the speed-dialing
memory and use them. Refer to the mobile
phone operator’s manual.
You can also use speed-dialing at the
COMAND (only mobile phone memory
locations 1-99).
You can enter up to 2 digits.
Open the Telephone menu
(page 78).
Memory locations with up to two digits:

Use the number keys 1 to 9 to
enter the memory location number.

Press E.
or

Press k.
or

Press the Send soft key.
The telephone dials the saved number.
Ending a call (
page 82).
Quick-dialing
Quick dialing can be used on memory loca-
tions 1-9.

Open the Telephone menu
(page 78).

Press one of the number keys 1 - 9
longer than 2 seconds.
The telephone dials the saved number.
Ending a call (
page 82).If the person called or you answer a call,
the call is active. The call indication is
displayed.
Call menuYou talk over the hands-free set. You can
set the volume for the hands-free
operation (
page 80).
The status bar indicates the call time and
the off-hook symbol.
Active call

88 Telephone*Telephone operationThe phone book contains all entries
of the internal memory of the mobile
phone (TDMA, CDMA and GSM mobile
phone), entries can marked with
symbols

of the SIM card (GSM mobile phone)
Displaying the phone book

In the Telephone menu (
page 78),
press the
Pho.Bk.
soft key.
The phone book will appear.The first entry found is at the top of the list
and highlighted. Entries marked with symbols have been
imported into the phone book from the in-
ternal memory of the mobile phone.
Usable phone number categories:

Symbol : Cell number

Symbol : Home number

Symbol : Work number
And additional categories:

Symbol : Fax number

Symbol : Pager number

Symbol : Main number
Phone book
Phone book
entry
Status bar shows
A phone number
Unknown
A name for a
phone number
The phone number
Several numbers
Several
Numbers

89 Telephone*
Telephone operation
You can select the following functions:
Changing the phone book display at
the COMAND

Selecting a phone book entry and
dialing the number (
page 89)
Changing the phone book display

Open the phone book (
page 88).

Press the
123
soft key.
The display changes to numbers. The
status bar displays the name of the
marked entry.
or

Press the
ABC
soft key.
The display changes to names. The
status bar displays the number of the
marked entry.Selecting a phone book entry and dia-
ling the number

Open the phone book (
page 88).
The list of phone book entries with
names starting with a certain letter is
displayed.
Changing the initial letters

Push the joystick to H or h one or
several times.
With every push of the button the
display changes to the next possible
letter. At the end of the letter list
follows the category
Others
.Category
Others
:
Here, all entries without names or with
names starting with a special character
(e.g. * or #) are put together.
Selecting an entry

Change the initial letter if required.

Push the joystick to G or g to
select a list entry.

Press the
Detail
soft key to see all
information about the entry.
iIf you hold one of the buttons, scrolling
is accelerated.

92 NavigationImportant notes

Important notesWarning
G
For safety reasons, you should only enter a
destination when the vehicle is stationary.
When the vehicle is in motion, a passenger
should enter the destination. Study manual
and select route before driving.
Do not watch display screen or operate but-
tons while the vehicle is in motion - let voice
instructions guide you. Stop at a safe locati-
on before using buttons or making correc-
tions.
Traffic regulations always have priority over
any route recommendations given.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car is co-
vering a distance of 44 feet (approximately
14 m) every second.
The route calculated by COMAND is a re-
commendation on how to best reach your
selected destination.
During route guidance, you will not receive
any information on
Traffic lights

Stop and yield signs

Parking or stopping zones

One-way streets

Narrow bridges

Similar traffic regulation data
You should therefore always strictly observe
traffic regulations while driving. Drive care-
fully and always obey traffic laws and road
signs even if they contradict COMAND in-
structions.
Warning
G
The Navigation DVD module contains a
Class 1 laser product. There is a danger of
invisible laser radiation if the cover is ope-
ned or damaged.
Do not remove the cover. The Navigation
DVD module does not contain any parts ser-
viceable by the user. For safety reasons,
have any necessary service work performed
by qualified personnel.
The display unit can cause injury if contac-
ted when open. Return the display unit after
inserting a Navigation DVD to its closed
position (
page 147).

93 Navigation
Important notes
COMAND calculates the route with the
help of data that is stored on the navigati-
on DVD.
Only use Mercedes-Benz navigation DVDs.
Using other navigation DVDs or CDs will
cause malfunctions and/or damage.
Because of changes in local traffic patterns
(e.g. road works) and/or incomplete data,
errors in calculation may occur.
As a result, the recommended route may
deviate from the ideal route. The data
stored on the DVD only reflects local con-
ditions at the time of DVD production. DVD
maps do not cover all areas nor all routes
within an area. Loading/ejecting a DVD
DVDs are loaded and ejected at the DVD
Navigation slot. The DVD Navigation slot is
located behind the display unit.

Open the display unit to get access to
the DVD Navigation slot as described in
“Starting an update” (
page 148).
Navigation DVD
!GPS (G
lobal P
ositioning S
ystem) sig-
nals received make it possible to deter-
mine the current vehicle position.
Deviations from the actual position
may occur

if the reception of GPS signals is
disturbed e.g. in parking garages
and tunnels

if road conditions are bad

depending on the vehicle’s conditi-
on
iThere are two l buttons. One is on
the display unit. The other is located
left of the DVD NAVIGATION slot
behind the display (
page 147).

99 Navigation
Navigation main menu

Press c.
The full view of the map appears. You
will see the vehicle’s current position.

Press any soft key.
The soft key displays will appear.

Press the
Memory
soft key.
The system saves the current position
as a destination in the
Last
destinations
memory
(
page 134).
Saving current locationiIf route guidance is not active and the
Navigation main menu was displayed
last, you need to press the button
twice.
iSuch destinations are marked in
the
Last destinations
memory
with _.
For permanent storage you can save
the destination in the regular
Destination memory (
page 135).

103 Navigation
Destination input
or
Press the
List
soft key.
The street list will appear. You can now
select a street.
Selecting a street
Select street list

Push the joystick to g or G to
select a street.
Available soft keys:

Press the
Details
soft key to see all
information about the street entry.

Use the
Page
V and
Page
v soft keys
to display the next or previous page.

Press the
Back
s o f t k e y t o r e t u r n t o t h e
previous menu.
Confirming a street (list)

Press E to confirm your selection.
The Enter house number menu will
appear.Entering a house number
Enter house number menuThe first line shows the available house
number range.
iYou can enter an intersection instead
of the house number. You cannot enter
both.