reset MERCEDES-BENZ CLK-Class 2009 C208 Comand Manual

Contents
Introduction . . . . . . . . . . . . . . . . . . . . .
7
Where
to find
it . . . . . . . . . . . . . . . . . . .
7
Symbols . . . . . . . . . . . . . . . . . . . . . . . . .
8
Operating
safety. . . . . . . . . . . . . . . . . . .
9
At a glance . . . . . . . . . . . . . . . . . . . . .
11
Radio
operating
elements . . . . . . . . . .
12
Single CD operating elements . . . . . . .
14
CD changer operating elements. . . . . .
16
MP3 CD operating elements . . . . . . . .
18
Satellite radio operating elements . . . .
20
Telephone operating elements . . . . . . .
22
Navigation operating elements . . . . . .
24
System operating elements . . . . . . . . .
26
Vehicle Equipment . . . . . . . . . . . . . . . .
27
Multifunction steering wheel . . . . . . . .
28
Selecting the multifunction display
29
Audio search function. . . . . . . . . . .
30
Menu system . . . . . . . . . . . . . . . . . . . .
31
Quick
reference
COMAND . . . . . . . . . .
34
Switching the COMAND control unit on and off . . . . . . . . . . . . . . . . . . . . . .
34
Volume . . . . . . . . . . . . . . . . . . . . . .
34
Balance and fader. . . . . . . . . . . . . .
36
Bass and Treble . . . . . . . . . . . . . . .
37
Sound functions . . . . . . . . . . . . . . .
37
System
settings. . . . . . . . . . . . . . . . .
39
System settings . . . . . . . . . . . . . . . . . .
40
Vehicle Equipment . . . . . . . . . . . . .
40
Setting the time . . . . . . . . . . . . . . .
40
Selecting the language . . . . . . . . . .
41
Switching verification and notification tones on and off . . . . . . . . . . . . . . .
41
Selecting display settings . . . . . . . .
42
Switching the screen off or on . . . .
43
Resetting all settings to the factory

settings . . . . . . . . . . . . . . . . . . . . . .
43
Audio. . . . . . . . . . . . . . . . . . . . . . . . . .
45
Audio operation . . . . . . . . . . . . . . . . . .
46
Vehicle Equipment . . . . . . . . . . . . .
46
General notes . . . . . . . . . . . . . . . . .
46
Opening the Audio menu . . . . . . . .
46
Selecting an audio source . . . . . . .
47
Muting . . . . . . . . . . . . . . . . . . . . . .
47
Radio operation . . . . . . . . . . . . . . . . . .
48
Switching to radio operation. . . . . .
48
Changing the Radio band . . . . . . . .
48
Selecting a station . . . . . . . . . . . . .
49
Memory functions . . . . . . . . . . . . . .
52
CD
operation . . . . . . . . . . . . . . . . . . . .
55
General Information on CD

operation . . . . . . . . . . . . . . . . . . . .
55
Tips on caring for your CDs . . . . . .
56
Loading a CD . . . . . . . . . . . . . . . . .
56
CD changer operation . . . . . . . . . . . . .
59
Switching to CD changer mode . . .
59
Loading CDs into the CD changer. .
59
CD operation . . . . . . . . . . . . . . . . . . . .
61
Switching to CD operation . . . . . . .
61
Switching on . . . . . . . . . . . . . . . . . .
62
Selecting a CD (CD changer only). .
63
Track select . . . . . . . . . . . . . . . . . .
64
Fast forward/reverse . . . . . . . . . . .
66
Muting. . . . . . . . . . . . . . . . . . . . . . .
67
Playback mode . . . . . . . . . . . . . . . .
67
MP3 CD operation . . . . . . . . . . . . . . . .
70
Safety instructions . . . . . . . . . . . . .
70
Tips on data storage media . . . . . .
70
Tips on caring for your MP3 CDs . .
71
Tips on creating MP3 CDs . . . . . . .
71
Tips on creating MP3 tracks . . . . . .
73
Tips on copyright . . . . . . . . . . . . . .
73
209_MY09_A_US.book Seite 3 Montag, 26. Mai 2008 6:12 18

13 At a glance
Radio operating elements
Function
Page
1
Audio menu
46
2
Soft keys(multifunction keys)
3
Color display with Radio
main menu
48
4
1 - 0, *Station selectionSaving stations manuallySelecting a station from
the preset memory
495254
5
Push the joystick to
H,h,g,G Function selectiong and Ge.g.

Automatic seek tuningH and he.g. Manual tuningPress E to confirm
4950
Function
Page
6
JMuting
47
7
Volume control
35
8
e Switching on and off
34
9
d and DAutomatic seek tuningManual tuning
4950
209_MY09_A_US.book Seite 13 Montag, 26. Mai 2008 6:12 18

29 At a glance
Multifunction steering wheel

Switch the multifunction display to the
respective system if you wish to
operate the system using the buttons
on the multifunction steering wheel.

On the multifunction steering wheel,
press è or ÿ repeatedly until
one of the following, Radio, Single CD
or MP3 CD, CD changer, Satellite radio
or Telephone display appears in the
multifunction display of the instrument
cluster.
Radio operation1Waveband2Station frequency
Single CD/ CD changer operation1Current CD2Current trackMP3 CD operation1MP3 mode2Current MP3 track
Satellite radio operation1SAT mode and preset channel number2Setting for station selection using
memory3Channel name or number
Selecting the multifunction display
209_MY09_A_US.book Seite 29 Montag, 26. Mai 2008 6:12 18

30 At a glanceMultifunction steering wheelTelephone operationList with a phone book entryOn display will appear either:
the main display with the
READY

message

a list with either a phone book entry or
one of the last 10 outgoing calls

In order to close the list display,

press t.This switches to the telephone main
display.
This allows you to choose whether the
radio automatic seek tuning function
selects stations via frequency or memory
preset
( page
49)
.

Frequnc
.
The radio will tune by frequency

Memory

The radio will tune by preset stations.

On the multifunction steering wheel,
press è or ÿ repeatedly until
the
Settings...
menu appears in the
multifunction display of the instrument
cluster.

Pressj.A collection of submenus appears in
the multifunction display.

Press ç repeatedly to select the Vehicle
submenu.

Press j and select
Audio search
function
.

Select
Frequenc.
or
memory
by pressing
æ or ç.
Audio search function
iMemory
is set as factory setting.
209_MY09_A_US.book Seite 30 Montag, 26. Mai 2008 6:12 18

40 System settingsSystem settings

System settings

Press
.
The System menu will appear.
System settings menuIn the System settings menu you can:
set the time

select the language
( page
41)

switch verification and notification
tones on and off
( page
41)

adjust display settings
( page
42)

reset all settings to the factory settings ( page
43)

open the text message (SMS) inbox
folder
( page
179)

In the System menu, press the
Timeset

soft key.
The hour digit of the time is highlighted.
Vehicle EquipmentiThis Operator’s manual describes all
features, standard or optional,
potentially available for your vehicle at
the time of purchase. Please be aware
that your vehicle might not be
equipped with all features described in
this manual.Activating the System menu
Setting the timeiYou can set the time in steps of 30
minutes if your vehicle is equipped with
Navigation and receives a GPS signal
(GPS controlled time). If your vehicle has no navigation
function or if there is no GPS reception,
the time can be set in steps of one
minute.
209_MY09_A_US.book Seite 40 Montag, 26. Mai 2008 6:12 18

43 System settings
System settings

Release the
Bright.
soft key
when
the desired brightness is reached.
Confirming the setting
Press the
Back
soft key.
or
Press E
.
The brightness setting is applied.

Press the
Scr.Off
soft key.
The screen is switched off.

Press any soft key or button.The screen is switched on again.

In the System settings menu, press the Reset
soft key.
The Reset inquiry menu will appear.
No

is highlighted.
If you do not wish to reset to the factory
settings
Press the
Back
soft key or press E
.
The System settings menu will appear.
Accepting the factory settings
Push the joystick to H or h
direction to select
Yes
.

Press E
.
The inquiry
Do you really want to
reset?
will appear.

Select
Yes
.
The message
All data has been
reset.
COMAND will now
restart. will appear.
Switching the screen off or onResetting all settings to the factory
settingsiAll your personal data, e.g. Last desti
-
nation entries or Radio main menu pre
-
set entries, will be deleted.
iThe factory settings are:Time - Central TimeLanguage - Instrument clusterVerification tone - OnNotification tone - OnDisplay setting - Automatic
209_MY09_A_US.book Seite 43 Montag, 26. Mai 2008 6:12 18

49 Audio
Radio operation
Weather Band WB
In the FM or AM Radio main menu,
press the
WB soft key.
An automatic scan is starting and the

COMAND plays and displays the
channel of the first strong WB station.
Switching back to FM or AM band
Press the
FM/AM
soft key.
or
Press the
WB soft key
The station last tuned to will begin to
play.
Switching back to the Audio menu
Press the
Back
soft key.
The Weather Band WB station will con
-
tinue to play.
You can use the following functions:
Automatic seek tuning
( page
49)

Manual tuning
( page
50)

Station selection via direct frequency
entry (FM, AM)
( page
50)

Preset station selection via number
keypad
( page
51)

Automatic station scan (FM, AM) ( page
51)

Station selection from the FM/AM
preset menu
( page
54)

Station selection from the FM/AM
Autostore presets
( page
54)
Automatic seek tuningVia memory presetsFM and AM bands
Press g or h.
or
Push the joystick to g
or G.
The radio will tune to the frequency
assigned to the next memory location.
If none has been set by you, the radio
will not change the station.
iWith the number keys 1 - 7 it is pos
-
sible to choose a channel.The message
No channel
will appear if
the system could not detect a channel.
Selecting a station
iMemory
must be activated in the Audio
search function menu, which appears
in the multifunction display.
Access this menu from the Settings...
menu via the Vehicle
submenu
( page
30)
. For additional
information refer to separate
Operator’s Manual instructions.
209_MY09_A_US.book Seite 49 Montag, 26. Mai 2008 6:12 18

51 Audio
Radio operation
The station you have selected will
begin to play.
FM, AM bandEntries outside the frequency range are
not accepted. The message
Please
observe frequency range 87.7 - 107.9
MHz
will appear briefly.
Preset station selection via number
keypadFM- and AM-Bands
Press one of the number keys, such as
2 briefly.The radio will tune to the frequency as
-
signed to that memory location. If none
has been set by you, the radio will not
change the station.
Automatic station scan (FM, AM)The stations on the same band (FM, AM)
can be scanned one after the other for 8
seconds each.Start scan function
Activate the desired wave band ( page
48)
.

Press the
Scan
soft key.
Frequency band
Frequency range
FMAM
87.7 - 107.9 MHz530 - 1710 kHz
iIf you do not make another entry within
8 seconds, the function will be canceled
and you will continue listening to the
station last tuned to.
iFM and AM presets are independent
and can only be accessed while in the
corresponding band.Saving stations for FM and AM ( page
52)
.
iIn the AM band, two search runs take
place. During the first run, stations with
good reception are played. During the
second run, stations with weaker
reception are played.
209_MY09_A_US.book Seite 51 Montag, 26. Mai 2008 6:12 18

52 AudioRadio operation
The scan function will begin.
End scan function and play a station
Press the
Scan
soft key again if you
hear the desired station.
orThe scan function stops automatically
when the first station received has been
scanned twice.
You can use the following functions:
Saving stations manually (FM, AM)

Saving stations automatically FM, AM ( page
53)

Selecting a station from the FM/AM
preset menu
( page
54)

Selecting a station from the FM/AM
Auto presets
( page
54)
Saving stations manually (FM, AM) In the Radio main menu
Activate the desired wave band ( page
48)
.

Press one of the number keys, e.g. 2,
longer than 2 seconds.You will hear a verification beep if the
beep tones option was activated in the
system settings
( page
41)
.
The radio saves the current station at
the memory preset selected. The me
-
mory preset selected will appear in the
status bar, e.g.
FM2
.
On the memory list
Activate the desired wave band ( page
48)
.

Press the
Presets
soft key.
The memory Preset menu will appear.
Memory functions
iThere are 10
presets available (1 -
9, 0).
An existing entry is overwritten in the
memory list when a new input is given.
209_MY09_A_US.book Seite 52 Montag, 26. Mai 2008 6:12 18

53 Audio
Radio operation

Push the joystick to H, h or g,
G to highlight the desired memory
preset.

Press
E
longer than 2
seconds.
You will hear a verification beep if the
beep tones option was activated in the
system settings
( page
41)
.
The current station will be saved at the
memory preset selected.
You will see the Radio main menu
automatically after 8 seconds

if you press the
Back
soft key.
Saving stations automatically (FM, AM)
Activate the desired wave band ( page
48)
.

Press the
Autost.
soft key
.
The autostore preset menu will appear.

Press E to start
Begin new search
.
The autostore function is active. The
message
Autostore being reloaded

will appear. The radio stores the 10
stations with the strongest signal. The
station frequencies available will
appear in the memory list.
iThere are 2 presets for each of the FM
and AM waveband
standard FM/AM presets (saving
stations manually) and

Auto presets (saving stations
automatically).
The standard FM/AM presets are not
affected by the Auto presets. This is a
second option for storing a station ran
-
ge you are currently receiving.
209_MY09_A_US.book Seite 53 Montag, 26. Mai 2008 6:12 18