sensor MERCEDES-BENZ CLK-Class 2009 C208 Comand Manual
Page 43 of 195
42 System settingsSystem settings
The respective tones are activated or
deactivated. You hear the tone when
you activate it.
Press the
Back
soft key.
The System settings menu will appear.
The setting is saved.
In the System settings menu, press the Display
soft key.
You can use the following functions:
set the display dimming characteristics
adjust the display brightness
Setting the display dimming
characteristics
Push the joystick to
G
or g
to
select an entry.
Day modeThe display is continuously set to
daylight design.Night modeThe display is continuously set to night-
time design.AutomaticThe display changes depending on the
ambient light sensor in the vehicle.
Press E
.
The setting is applied. The System
settings menu will appear.
Adjusting the display brightness
Press the
Bright.
soft key.
Push the joystick to H or h
direction to adjust the brightness.
or
Press the
Bright
. soft key longer than
2 seconds.
The display brightness changes
gradually. When the slider reaches the
end of the left or right border, it starts
moving into the opposite direction.The display brightness changes
gradually. When the slider reaches the
end of the left or right border, it starts
moving into the opposite direction.
Selecting display settingsOption
Symbol
Display mode selected
_
Display mode not
selected
-
209_MY09_A_US.book Seite 42 Montag, 26. Mai 2008 6:12 18