buttons MERCEDES-BENZ CLK500 COUPE 2003 C209 User Guide

226 Controls in detailUseful featuresTelephone*
Radio transmitters, such as a portable tele-
phone or a citizens band unit, should only
be used inside the vehicle if they are con-
nected to an antenna that is installed on
the outside of the vehicle.
The external antenna must be approved by
Mercedes-Benz. Please contact an autho-
rized Mercedes-Benz Center for informa-
tion on the installation of an approved
external antenna. Refer to the radio trans-
mitter operation instructions regarding use
of an external antenna.You can take and place telephone calls us-
ing the
í
and
ì
buttons on the
steering wheel. To carry out other tele-
phone functions, use the control system
(
page 138).
See separate operating manual for instruc-
tions on how to use the telephone.
Warning!
G
Never operate radio transmitters equipped
with a built-in or attached antenna (i.e. with-
out being connected to an external antenna)
from inside the vehicle while the engine is
running. Doing so could lead to a malfunc-
tion of the vehicle’s electronic system, pos-
sibly resulting in an accident and/or serious
personal injury.
Warning!
G
Please do not forget that your primary re-
sponsibility is to drive the vehicle. A driver’s
attention to the road must always be
his /her primary focus when driving. For
your safety and the safety of others, we rec-
ommend that you pull over to a safe location
and stop before placing or taking a tele-
phone call.
If you choose to use the telephone
1 while
driving, please use the hands-free device
and only use the telephone when road, traf-
fic and weather conditions permit. Some ju-
risdictions prohibit the driver from using a
cellular telephone while driving a vehicle.
Only operate the COMAND* (Cockpit Man-
agement and Data System)
1 if road, traffic
and weather conditions permit.
1Observe all legal requirements.
Bear in mind that at a speed of just 30 mph
(approximately 50 km / h), your vehicle is
covering a distance of approx. 44 feet (ap-
proximately 13.5 m) every second.

233 Controls in detail
Useful features
Upgrade signals
The Tele Aid system processes calls using
the following priority.

Automatic emergency – First priority


Manual emergency – Second priority


Roadside assistance – Third priority


Information – Fourth priority
Should a higher priority call be initiated
while you are connected, an upgrade (al-
ternating) tone will be heard, and the ap-
propriate indicator lamp will flash. If
certain information such as vehicle identi-
fication number or customer information is
not available, the operator may need to re-
transmit.
During this time you will hear a beep and
voice contact will be interrupted. Voice
contact will resume once the retransmis-
sion is completed. Once a call is conclud-
ed, a beep will be heard and the
appropriate indicator lamp will stop flash-
ing. The COMAND* system operation will
resume. the Response Center established, then
the Tele Aid system could not initiate
an Information call (e.g. the relevant
cellular phone network is not avail-
able). The message
Info – Call failed
appears in the
multifunction display.
Information calls can be terminated us-
ing the
ì
button on the multifunc-
tion steering wheel.
!If the indicator lamps do not start flash-
ing after pressing one of the buttons or
remain illuminated (in red) at any time,
the Tele Aid system has detected a
fault or the service is not currently ac-
tive, and may not initiate a call. Visit
your Mercedes-Benz Center and have
the system checked or contact the Re-
sponse Center at 1-800-756-9018 (in
the USA) or 1-888-923-8367 (in Cana-
da) as soon as possible.
!If the indicator lamp continues to flash
or the system does not reset, contact
the Response Center at
1-800-756-9018 (in the USA) or
1-888-923-8367 (in Canada), or
Mercedes-Benz Customer Assistance
at 1-800-FOR-MERCedes
(1-800-367-6372) in the USA or Cus-
tomer Service at 1-800-387-0100 in
Canada.iThe indicator lamp in the respective
button flashes until the call is conclud-
ed. Calls can only be terminated by a
Response Center or Customer Assis-
tance Center representative except
Roadside Assistance and Information
calls, which can also be terminated by
pressing button
ì
on the multifunc-
tion steering wheel.

236 Controls in detailUseful features
Programming or reprogramming the in-
tegrated remote control
Turn key in the starter switch to
position1 or2.

Hold the end of the hand-held transmit-
ter of the device you wish to train
approximately 2 to 5 inches (5 cm to
12 cm) away from the surface of the in-
tegrated remote control located on the
inside rear view mirror, keeping the in-
dicator lamp in view.

Using both hands, simultaneously push
the hand-held transmitter button and
the desired integrated remote control
button. Do not release the buttons until
completing next step.

The indicator lamp on the integrated
remote control will flash, first slowly
and then rapidly. The rapid flashing
lamp indicates successful program-
ming of the new frequency signal.

When the indicator lamp flashes rapid-
ly, release both buttons.

To program the remaining two buttons,
repeat the above steps.
iFor operation in the USA only: This de-
vice complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and
(2) this device must accept any inter-
ference received, including interfer-
ence that may cause undesired
operation.
Any unauthorized modification to this
device could void the user’s authority
to operate the equipment.
iIf, after several attempts, you do not
successfully program the integrated re-
mote control device to learn the signal
of the hand-held transmitter, the ga-
rage door opener could be equipped
with the “rolling code feature”.

238 Controls in detailUseful featuresOperating the remote control
Turn key in starter switch to position1
or2.

Select and press the appropriate but-
ton to activate the remote controlled
device.
The integrated remote control trans-
mitter continues to send the signal as
long as the button is pressed – up to
20 seconds.Erasing the remote control memory

Turn key in starter switch to position1
or2.

Simultaneously hold down the left and
right side buttons for approximately
20 seconds, or until the indicator lamp
blinks rapidly.
The codes of all three channels are
erased.iIf you sell your vehicle, erase the codes
of all three channels.

362 Technical termsCAC
(C
ustomer A
ssistance C
enter)
Mercedes-Benz customer service cen-
ter, which can help you with any ques-
tions about your vehicle and provide
assistance in the event of a break-
down.
CAN system
(C
ontroller A
rea N
etwork)
Data bus network serving to control ve-
hicle functions such as door locking or
windshield wiping.
Cockpit
All instruments, switches, buttons and
indicator/warning lamps in the passen-
ger compartment needed for vehicle
operation and monitoring.COMAND
(C
ockpit M
anagement and D
ata Sys-
tem)
Information and operating center for
vehicle sound and communications
systems, including the radio and navi-
gation, as well as for other optional
equipment (CD changer, telephone,
etc.).
Control system
The control system is used to call up
vehicle information and to change
component settings. Information and
messages appear in the multifunction
display. The driver uses the buttons on
the multifunction steering wheel to
navigate through the system and to ad-
just settings.
Cruise control
Driving convenience system for auto-
matically maintaining the vehicle speed
set by the driver.Distronic*
A driving convenience cruise control
system which helps the driver maintain
a pre-selected speed:


If there is no vehicle directly ahead,
the system operates in the same
way as conventional ->cruise con-
trol.


If a slower moving vehicle is ahead,
Distronic will reduce your vehicle
speed to the extent permitted by re-
duced throttle and up to 20% brak-
ing power to maintain the preset
minimum following distance.
DTR
(->Distronic*)

364 Technical termsMemory function*
Used to store three individual seat,
steering wheel and mirror positions for
each key or, if so equipped, KEY-
LESS-GO* feature.
Menu
The control system displays are ar-
ranged in menus. Each menu contains
a number of commands for particular
systems. In the Audio menu, for exam-
ple, you will find the commands
Select
radio station
or Operate CD player
.
Using commands you can directly
change the settings for your vehicle.
MON
(M
otor O
ctane N
umber)
The Motor Octane Number for gasoline
as determined by a standardized meth-
od. It is an indication of a gasoline's
ability to resist undesired detonation
(knocking). The average of both the
MON (Motor Octane Number) and
->RON (Research Octane Number) is
posted at the pump, also known as AN-
TI-KNOCK INDEX.Multifunction display
Display field in the speedometer used
to present information provided by the
control system.
Multifunction steering wheel
Steering wheel with buttons for operat-
ing the control system.
Overspeed range
Engine speeds within the red marking
of the tachometer dial. Avoid this en-
gi ne sp ee d ra nge , a s it m ay re su lt i n s e-
rious engine damage that is not
covered by the Mercedes-Benz Limited
Warranty.
Parktronic*
System which uses visual and acoustic
signals to assist the driver during park-
ing maneuvers.
Poly-V-belt drive
Drives engine-components (alternator,
AC compressor, etc.) from the engine.Power train
Collective term designating all compo-
nents used to generate and transmit
motive power to the drive axles, includ-
ing


engine


clutch/torque converter


transmission


transfer case


drive shaft


differential


axle shafts/axles
Program mode selector switch
Used to switch the automatic transmis-
sion between regular operationS and
winter operationW.
CLK 55 AMG with steering wheel gear-
shift control and manual shift program.
In addition toS andC (for regularS or
comfortC operation, see above) you
can use theM for manual shift
program.

380 IndexLoading 212
Cargo tie-down rings 218
Instructions 217
Roof rack 212
Ski sack* 212
Split rear bench seat 215
Locator lighting 107
Setting 130
Lock button 363
Lock buttons 363
Door handle (KEYLESS-GO*) 53
Locking 50, 84
Fuel filler flap 251
Global with KEYLESS-GO* 90
Global, SmartKey 85
The vehicle with KEYLESS-GO* 91
Trunk lid, separately 94
Vehicle in an emergency 311
Loss of keys 87, 91
Loss of Service and Warranty Information
Booklet 341
Low beam headlamps
Messages in display 296
Replacing bulbs 317, 319
Lowering
Vehicle 328Lubricants
Technical data 351
M
Main dimensions 349
Maintenance 12, 266
Malfunction
Displaying 123
Malfunction memory 122
Calling up 122
Manual headlamp mode 106
Manual operations
Fuel filler flap 313
Interior lighting control 110
Locking the vehicle 311
Sliding/pop-up roof 314
Unlocking the driver’s door 310
Unlocking the trunk lid 311
Unlocking transmission selector lever
313
Manual shift program, CLK 55 AMG 146
MAXCOOL maximum cooling 159
Mechanical key 310Memory function 102, 364
Recalling positions from memory 103
Storing exterior rear view mirror park-
ing positions 103
Storing key dependent settings 103
Menus 115
AUDIO 119
Control system 364
Distronic* 121, 199
In control system 117, 118
Malfunction memory 122
NAVI 121
Settings menu 123
Standard display 119
Submenus 116
TEL* 138
Trip computer 136
Microphone
Hands-free microphone 27
Miles/kilometers in speedometer
Setting 126
Minispare wheel 307
Bolts 309
Mounting 324
Technical data 347

381 Index
Mirrors
Adjusting 38
Automatic antiglare for rear view mirror
149
Exterior rear view mirror 38
Exterior rear view mirror parking posi-
tion 150
Exterior rear view mirror parking posi-
tions 135
Inside rear view mirror 38
Storing exterior mirror parking position
103
MON 251
MON (Motor Octane Number) 364
Mph or km/h in speedometer 126
Multicontour seat* 100
Multifunction display 114, 364
Selecting language 127
Standard display 118
Multifunction display messages
ABS 284
BAS 285
Battery 303
Brake fluid 287
Brake pads 286
Check engine 280Coolant 290
Coolant level 289
Display 304
Distronic* 292
Doors 292
Engine 280
ESP 293
Fuel reserve tank 296
Hood 296
Key 296
Lamps 296–299
Parking brake 299
Selector lever 292
SmartKey with KEYLESS-GO* 288
Steering gear oil level 300
Tele Aid 301
Telephone* 301
Trunk 301
Washer fluid 301
Multifunction steering wheel 24, 115, 364
Buttons 115N
Navigation system
Operating 121
See separate COMAND* operating in-
structions
Night security illumination 107
O
Occupant safety 56
Airbags 57
Children and airbags 58
Children in the vehicle 66
Fastening the seat belt 40
Infant and child restraint systems 66
LATCH child seat mounts 71
Seat belts 40, 60
Odometer, main 23
Oil
Adding 255
Checking level 254
Consumption 254
Filler neck 255
Viscosity 363
Oil level
Checking 252

388 IndexSpeedometer 23
Displaying gear range 143
Displays 198
Settings units 126
Speedometer display mode
Selecting 126
Speedshift
Downshifting 148
Upshifting 147
Speedshift, CLK 55 AMG 146
Split rear bench seat 215
SRS 64, 365
Indicator lamp 278
Standing lamps 105
Replacing bulbs 317, 319, 321
Standing water
Driving instructions 247
Starter switch 21, 31
Positions 31
Starting difficulties 44
Starting position 31
Starting the engine 43
Station (radio)
Search 120
Station selection
Setting 132Steering column
Height adjustment 38
Length adjustment 38
Steering gear oil
Message in display 300
Steering wheel
Adjusting 37
Buttons 24
Cleaning 273
Electrical adjustment 37
Height adjustment 38
Steering wheel gearshift control
Downshifting 148
Upshifting 147
Steering wheel gearshift control (Speed-
shift), CLK 55 AMG 146
Stolen vehicle
Tracking services 235
Stopping
Sliding/pop-up roof 191
Windows 188
Storage bags 222
Storage compartments
Glove box 219
Storage spaces
Cup holder 220, 221Storing (Memory function)
Positions into memory 103
Submenus
Convenience 133
For settings 116
In control system 118
Instrument cluster 126, 128
Lighting 129
Resetting functions in Control system
124
Selecting 124
Settings menu 124
Vehicle 132
Sun visors 152
Supplemental Restraint System (SRS) 365
Switching off
Audio system 168
Automatic central locking (control sys-
tem) 133
Engine 51
ESP 78
Hazard warning flasher 108
Headlamps 51
Seat heating 101