fuse MERCEDES-BENZ CLS-Class 2006 W219 Comand Manual

91 Telephone*
Telephone operation
Answering calls
On the COMAND control unit
Press.On the multifunction steering wheel
Presss .
In both cases the call is active. Commu-
nication is conducted via the hands-free
system. The call volume can be adjusted
(
page 30).
For other user functions, see
“Active call” (
page 96).
Ending or refusing a call
On the COMAND control unit
Press.
On the multifunction steering wheel
Presst .The desired phone number has to be en-
tered when placing an outgoing call.
The following options are available:
entering a phone number directly
(
page 92)
initiating redial (page 92)
selecting an entry in the accepted and
missed calls list (
page 93)
selecting an entry in the dialed calls list
(
page 94)
using speed dial (page 95)
opening the phone book and selecting
an entry (
page 99)
i
The caller’s number appears only if it is
transmitted.
The caller’s name only appears if, in ad-
dition, the number and the name are
stored in the phone book (
page 98).
i
It is also possible to accept, refuse or
end a call from the cellular phone
(
Telephone Operation Guide).
Placing an outgoing call

115 Navigation*
Destination entry
Deleting a character
Press the Delete soft key, if necessary.
The character last accepted by the sys-
tem is deleted.
Confirming the data entry
After entering all the characters data entry
must be confirmed.
Press and hold  for approx. 2 sec-
onds to confirm the entry;
or
Use or  to select the sym-
bol and press.One frequently used destination address
can be established as the Home address.
Call up the Navigation main menu
(
page 110).
Press the Home soft key.
A message
No home address stored appears
or if a home address has already been
established, the home address ap-
pears.
To start route guidance to the estab-
lished home address press.
or
To enter or change the home address,
press the
Change soft key.
The Navigation main menu with menu
items to change the home address ap-
pears.i
Do not confuse the Delete soft key (de-
letion of the last character) with the
Back soft key (deletion of the complete
entry).
ok
i
The symbol can only be selected if
the system has recognized data entry.
Entering a home address
ok


118 Navigation*
Destination entry
Use or  to select a region.
Press .
Selecting a different region deletes the
city last entered. The first city of the
newly selected region appears (in al-
phabetical order).
The Destination entry menu (
page 117)
represents the starting point.
Enter city (USA) appears in the status bar.
The characters in parenthesis indicate the
selected region.
Accepting the displayed destination
Press and hold  for approx. 2 sec-
onds.Entering a different city
Use the keypad menu or the 12 buttton
keypad to enter the data of the city
(
page 114).
After entering the city a selection list of
cities appears. Now continue with se-
lecting a city.
Switching to a selection list is possible at
any time while entering a city.
Press the List soft key.
The selection list appears. Now contin-
ue with selecting a city.
Entering a cityi
Do not confuse the button with the
symbol in the main screen.
ok

124 Navigation*
Destination entry
A house number can be entered after en-
tering the destination street (
page 121).
Press the Hse. no. soft key.The Enter House Number menu ap-
pears (
page 124), or the house num-
ber list appears. Now a house number
range can be selected (
page 125).
Enter House Number menu

Use, , , ,  or to
select the numbers. Press after
each selection.
or
Press  -  to enter the numbers.
Press the Delete soft key if necessary.
The number last accepted by the sys-
tem is deleted.
Press and hold  for approx. 2 sec-
onds to confirm the input;
or
Entering a house number
i
An intersection instead of a house
number can be entered (
page 123).
Entry of both is not possible.
i
The Hse. no. soft key is only available
when registered house numbers are
stored on the navigation DVD for the
selected street.
i
Symbol “”XX represents a space.
i
Do not confuse the Delete soft key (de-
letion of the last number) with the
Back
soft key (deletion of the complete en-
try).

150 Navigation*
Last destinations and destination memory
If necessary, use,  or to se-
lect one of the shift fields.
Press.
The characters are shifted.
Use , , , ,  or  to
select the characters. Press  after
each selection.
If necessary, press the Delete soft key
to delete the character last entered.
Upon completion of the name entry
press and hold  for approx. 2 sec-
onds;
or
Use or  to select the sym-
bol and press .
The system will store the address.
i
Do not confuse the Delete soft key (de-
letion of the last character) with the
Back soft key (deletion of the complete
entry).ok