ESP MERCEDES-BENZ CLS-Class 2008 W219 Comand Manual

63 Audio
CD changer* operation

Press button 1 to close.The CD changer retracts; the control
panel faceplate 2 pivots down.
In order to insert CDs, you will need to first
access the CD changer
( page
61)
.
1CD slot2Magazine compartment buttons
Retracting the CD changer Loading CDsWarning
G
In order to avoid distraction which could
lead to an accident, the driver should insert
CDs with the vehicle at a standstill and oper
-
ate the audio system only when road, weath
-
er and traffic conditions permit.Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate
-
ly 14 m) every second.!Do not attach labels of any type to the
CD. They may become detached and
damage the drive.
!Only use CDs, which bear the label
shown and that conform to the com
-
pact disc digital audio standard

(IEC 60908).Do not play single-CDs (80 mm) with an
adapter. Only use round, 12 cm diame
-
ter CDs.Your CD changer has been designed to
play CDs which correspond to the IEC
60908 standard. Therefore only CDs
not exceeding a thickness of 1.3 mm
can be used.

If you insert thicker data carriers, e.g.
ones that have data on both sides (one
side with DVD data, the other side with
audio data), they cannot be ejected
and will damage the CD changer.
iThe CD changer may not be able to play
audio CDs with copy protection.

64 AudioCD changer* operationThe CD changer has a built-in magazine
which can hold up to six CDs.

The CD changer has six magazine compart
-
ment buttons 2 for controlling the loading
procedure. LEDs in the buttons indicate
the status of the corresponding magazine
compartment.
Button LED off:

Magazine compartment empty

Button LED continuously red:

Magazine compartment loaded with a
CD
The status of a magazine compartment can
also be seen when selecting a CD in the CD
Selection menu
( page
68)
.
The CD slot 1 for loading CDs into the CD
changer is located above the buttons 2.Loading options:
Loading a single magazine compart
-
ment


Loading all six magazine compart
-
ments

Loading a single magazine compart
-
ment 
Access the CD changer
( page
62)
.

Briefly press the button 2 of the emp
-
ty magazine compartment to be load
-
ed.

Wait until the LED in the button 2
flashes green.This indicates that the CD changer re
-
quests a CD.

Insert an audio CD into the CD slot 1
within approx. 15 seconds. Insert the
CD face up.The CD is pulled in. The red LED in the
corresponding magazine compartment
button 2 lights up continuously. The
system starts playing the CD. The load
-
ing procedure is completed.

Retract the CD changer
( page
63)
.
Loading all six magazine compart
-
mentsInitial situation: all magazine compart
-
ments empty.The CD changer loads all magazine com
-
partments beginning with compartment 1.
Access the CD changer
( page
62)
.
1CD slot2Magazine compartment buttons
iLoading a magazine slot will stop the
playback of a CD in the changer.

65 Audio
CD changer* operation

Press and hold the button 2 of an
empty magazine compartment for
more than 2 seconds.The LEDs of all magazine compartment
buttons 2 briefly light up green sever
-
al times.

Wait until the LED in the first magazine
compartment button 2 flashes green.This indicates that the CD changer re
-
quests a CD.

Insert an audio CD into the CD slot 1
within approx. 15 seconds. Insert the
CD face up.The CD is pulled in; the magazine com
-
partment is loaded. The red LED in the corresponding mag
-
azine compartment button 2 lights up
continuously. The CD changer then requests inser
-
tion of the next CD. The LED in the cor
-
responding magazine compartment
button 2 flashes green.

Repeat the last step until all six maga
-
zine compartments are loaded.The system plays the sixth CD. The
LEDs in all magazine compartment but
-
tons 2 light up red continuously.The loading procedure is completed.

Retract the CD changer
( page
63)
.
The following options are available:
Ejecting one CD


Ejecting all CDs
( page
66)
Ejecting one CD 1CD slot2Magazine compartment buttons
Access the CD changer
( page
62)
.

Briefly press the appropriate magazine
compartment button 2.The button LED 2 flashes red. The CD
changer ejects the CD.
iIf, for example, only compartments 1
through 4 are to be loaded instead of
all six compartments, simply do not in
-
sert the a fifth CD into the slot 1. The
CD changer attempts to load the fifth
CD, yet aborts the loading procedure.
The system automatically plays the last
(fourth) CD.Ejecting CDs


67 Audio
CD changer* operation
The CD changer main menu appears.You will hear the CD listened to last. If
the CD listened to last is no longer
available, the unit plays the next avail
-
able audio CD.If the CD contains CD text data, the CD
changer main menu will show the name
of the CD and the title of the track cur
-
rently playing. The status bar also contains: 
The track number and total number
of tracks

The elapsed playing time of the
track
1CD name or CD number2Track title or track number3Elapsed track playing time4Track number/Total tracksThe CD changer menu shows the

CD title at the top and track title in the cen
-
ter of the main area if the CD contains cor
-
responding text data.If the CD does not contain any CD text da
-
ta, the number of the CD and the track
number are displayed instead of the name
of the CD and the track title.
The numbers 1 through 6 are assigned to
the CD compartments of the CD changer.The following options are available:
Selecting via CD list


Selecting via direct entry of the CD number
( page
68)

Selecting via CD Selection menu

( page
68)
Selecting via CD list The CD list contains all loaded CDs. Only
one entry is visible at a time. Its name or
number is shown at top of the CD changer
main menu (here CD 5).
iThe
CDC
soft key will only be visible if a
CD changer is connected.
Selecting CDsiThis selection is possible only if two or
more audio CDs are loaded.

68 AudioCD changer* operationThe entry appears above the track display.
It shows the number of the current CD.
Use

or

to select another CD
from the list.

Wait approx. 3 seconds without chang
-
ing the selection.The CD is changed. The newly selected
CD is played.
Selecting via direct entry of the CD
number 
Press one of the
3
- 
keys.
The CD changer switches to the CD
loaded in the appropriate CD changer
compartment.
Selecting via CD Selection menu 
Press the
Magaz.
soft key.
The CD Selection menu appears. You
see the list of all six compartments.
An entry shows the CD title if the CD
contains corresponding CD text data. No text displayed with a CD symbol in
-
dicates that the corresponding CD
does not contain any CD text dataAn entry shaded out indicates an emp
-
ty CD changer compartment.

Use

or

to select a CD.
The system will skip empty CD

changer compartments

Press

.
The newly selected CD is played.
iThe system will skip empty CD changer
compartments.
iThe CD fails to be changed if you select
an empty compartment.

71 Audio
CD changer* operation

Repeat
CD
The current CD will be repeated until
this function is deactivated.

Random track

The tracks are played in random order
(e.g. track 3, 8, 5 etc.).If several CDs are loaded in the CD
changer, the last track on a CD in the
changer will be followed by the first
track of the next CD in the changer. The CDs are changed in their normal
sequence (e.g. CD 1, 2, 3, etc.).

Random CD

At least 4 tracks on one CD are played
in random order (e.g. track 5, 7, 3, 9).
Then, the next CD will be played.

The CDs are changed in random

order (e.g. CD 4, 1, 5, etc.).
Switching the playback option 
In the CD changer main menu ( page
66)
press the
Setting
soft key.
The Setting menu appears.

The solid circle
indicates which op
-
tion is currently selected.

Use

or

to select a different op
-
tion.

Press

.
The option is activated. A correspond
-
ing display will appear in the status bar
for all options except
Normal
sequence
.
An option will remain activated even if
the COMAND is switched OFF and then
ON again.
iIt is only possible to select this function
if at least two audio CDs are loaded in
the CD changer.
iThis selection is only available if at
least two audio CDs are loaded.

80 Satellite radio*Satellite radio operationTwo options are available:
Storing using the number keys

Storing using the Presets menu
Storing via number keys 
Press and hold a number key between 3
and
"
for more than 2 seconds.
The currently selected station is stored
in the corresponding preset location.
Storing via Presets menu 
Press the
Presets
soft key.
The Preset list appears.

Use

or

to select a preset loca
-
tion.

Press

for more than 2 seconds.
The currently selected station is stored
in the corresponding preset location.
Resetting Presets menu The
Presets
soft key is active indicated by
its color changed.

Press the
Presets
soft key.
All channels in the Preset list are delet
-
ed.

Press the
Service
soft key.
The telephone number of the Sirius
Service Center and the twelve-digit
electronic serial number (ESN) of the
particular receiver appear.
It may be necessary to call the Sirius Ser
-
vice Center if, for example:
you want to cancel the subscription or
to re-subscribe at a later date,

you forget to pay the bill, or

you sell the car to another person.
Storing stationsiWhen storing a station out of the cate
-
gory
All
, later selection of this channel
does not lead into the category mode.
Calling the Sirius Service Center

87 Telephone*
Telephone operation

In succession, press the number keys !
, 3
and
3
.

Press
0
.
The telephone establishes the connec
-
tion, the ringing tone is audible.

Wait until the emergency call center
answers, then describe the emergency.
The PIN protects the telephone against un
-
authorized use. Your PIN is found in the
telephone service provider's documenta
-
tion.
Commit your PIN to memory.

Most telephone functions are not available
before entering the PIN.
Press the corresponding number key 3
- "
for each digit.
In case of erroneous entry, you can de
-
lete the last or more digits:
Press the
Delete
soft key as often
as required.

Once all digits have been entered,
press the
OK soft key.
If the input is correct, the telephone
will log itself into the network.If the input is incorrect, message

Wrong PIN number
will appear briefly.

Re-enter the PIN.
After three incorrect entries, the SIM
card is blocked. Message
SIM
card
blocked
will appear briefly.


The PUK has to be entered.
( Telephone Operation Guide)
Entering the PIN (only GSM) iIf a GSM cellular phone is used, a PIN
may also have to be entered.The PIN may be entered on the cellular
phone itself (
 Telephone Operation
Guide).
iThe telephone cannot be used before it
is logged- in.

90 Telephone*Telephone operationSelectable soft keys and options
soft key

Opens the phone book
( page
97)
,

Recvd.#
soft key

Opens the accepted and missed calls
list
( page
93)
,

Dialed
# soft key

Opens dialed calls list
( page
94)
,

SMS
soft key

Provides access to the SMS menu ( page
100)
,

Entry of a phone number
( page
91)
.
The ringing tone is audible in the event of
an incoming call. The call screen pops up
on the current display.If the multifunction display in the instru
-
ment cluster is set to telephone mode, the
call screen also appears in the multifunc
-
tion display.
Answering calls On the COMAND control unit
Press
0
.
iIf a list is empty, the corresponding soft
key is without function. This is indicat
-
ed by the corresponding soft key dis
-
play being shaded out.
Answering an incoming call
iThe caller’s number appears only if it is
transmitted.

The caller’s name only appears if, in ad
-
dition, the number and the name are
stored in the phone book
( page
97)
.

100 Telephone*SMS (Mail)SMS messages can be received if your ve
-
hicle is equipped with a telephone and
SMS messaging is available from your car
-
rier.Received messages are saved in the folder
SMS inbox.
Open the Telephone main menu ( page
89)
.

Press the
SMS
soft key.
The folder SMS inbox appears.
The SMS inbox shows the list of re
-
ceived messages. The list is sorted
chronologically, the last message re
-
ceived is displayed at the top of the list.The corresponding date and time ap
-
pears in the status bar when the select
-
ed message has been received.

Use

or

to select another mes
-
sage.
iIncoming new messages are indicated
by the
symbol in the status bar.

Symbol
appears in the status bar if
the SMS memory is full.In addition, a corresponding message
is displayed when the folder is opened.SMS inbox
iIf no SMS messages have been re
-
ceived the
SMS
soft key is without func
-
tion and therefore shaded out.