change time MERCEDES-BENZ CLS-Class 2008 W219 Comand Manual

98 Telephone*Phone book
Adding spoken names to a phone book
entry
( page
99)
. This option is only
available for vehicles with voice control
system*.

Deleting a phone book entry ( page
99)
.
Switching between number and name
Open the phone book from COMAND ( page
97)
.

Press the
123
soft key.
This switches the display to number
display. The name of the highlighted
entry is shown in the status bar;
or
Press the
ABC
soft key.
This switches the display to name dis
-
play. The number of the highlighted en
-
try is shown in the status bar.
On the COMAND control unit
Open the phone book
( page
97)
.
A list of phone book entries appears,
beginning with a specific first letter (ini
-
tial).
Changing initials
Press

or

once or repeatedly.
Each time you press the button, the
display changes to the next letter up or
down. At the end of the list of letters is the
category
Other
. This category com
-
bines all entries without a name, or en
-
tries whose names start with a special
character (e.g.
* or
#).
Selecting an entry
If necessary, change the initial letter ( page
98)
.

Select an entry using

or

.
If you press and hold either one of the
buttons, the scrolling up or down accel
-
erates.
Establishing a connection
Press
0
.
The telephone initiates the connection
with the appropriate number.
On the multifunction steering wheel 
Switch the multifunction display in the
instrument cluster to the Telephone
main display
( page
89)
.

Press
j or k repeatedly until
the desired entry is shown in the multi
-
function display.
Selecting a phone book entry and es
-
tablishing a connection

105 Navigation*
Important notes
COMAND calculates the route with the
help of data that is stored on the naviga
-
tion DVD.Only use Mercedes-Benz navigation DVDs
designed for the E-Class (211) COMAND
system. No other CDs or DVDs will work.
Using other navigation CDs or DVDs might
lead to malfunctions.Because of changes in local traffic patterns
(e.g. road works) and/or incomplete data,
errors in calculation may occur.As a result, the recommended route may
deviate from the ideal route. The data
stored on the DVD only reflects local con
-
ditions at the time of DVD production. DVD
maps do not cover all areas nor all routes
within an area.
The DVD is loaded into (and ejected from)
the navigation module.

The navigation module is mounted on the
left-hand side of the trunk.1Ejecting DVDs 2DVD slot
Loading 
Insert the DVD into the DVD slot 2
with the label facing up.The navigation computer pulls the DVD
in.
Ejecting 
Press

and wait until the navigation
computer ejects the DVD.
The navigation DVD covers the continental
U.S., Hawaii and Canada. Contact your Mercedes-Benz Center or the
Customer Assistance Center in the U.S. at
1-800-FOR-MERCedes (1-800-367-6372)
or in Canada at 1-800-387-0100 for other
DVDs that may be available.
Change the navigation DVD ( page
105)
.
Navigation DVD
Loading/ejecting the DVD iYour Navigation DVD drive has been
designed to play DVDs which corre
-
spond to the IEC
60908 standard.
If you insert thicker data carriers, e.g.
ones that have data on both sides (one
side with DVD data, the other side with
audio data), they cannot be ejected
and will damage the drive.
Travelling abroad

126 Navigation*Destination entry
Press

.
The Start Route Guidance menu ap
-
pears.

Press

.
Route calculation begins.
You can store the current vehicle position
or a location selected via the map as an en
-
try in the
Last
Destinations
memory.
Therein such entries are marked with

( page
148)
.
If you wish to store such entries for later
retrieval or repeat usage, you can store
them in the standard destination memory ( page
149)
.
Storing current vehicle position
Press
%
.

Press any soft key if the soft key dis
-
plays are hidden.The soft key displays appear.
1Symbol
= current vehicle location

Press the
Memory
soft key.
The system stores the current vehicle
position.

While storage takes place, the
Memory

soft key display changes its color for a
short period of time.
iRoute guidance is only possible to co
-
ordinates within the digital map range.
Storing map location

127 Navigation*
Destination entry
Storing locations selected via the map
Press
%
.

Move the map and select a location ( page
124)
.

Press the
Memory
soft key.
The system stores the current cursor
position.

While storage takes place, the
Memory

soft key display changes its color for a
short period of time.

128 Navigation*Route guidanceYou can start route guidance when the
destination input is complete and Start
Route
Guidance
is displayed at the
bottom of the main area.
Besides starting route guidance following
soft keys are available:
Mode
soft key

Provides access to the route mode set
-
ting for certain road types to be avoid
-
ed
( page
109)
.

Save
soft key

Stores the entered destination in the
destination memory
( page
149)
.

To start route guidance, press

.
The route is calculated and route guid
-
ance begins.
Depending on the distance to the destina
-
tion, route calculation can take some time.
While the route is being calculated, Reading Navi DVD... Please Wait
and an
arrow pointing towards the destination are
displayed. Once route calculation is com
-
plete, route guidance begins.Because of changes in local traffic patterns
(e.g. road works) and/or incomplete data,
errors in calculation may occur.
As a result, the recommended route may
deviate from the ideal route. The data
stored on the DVD only reflects local con
-
ditions at the time of DVD production. DVD
maps may not cover all areas nor all routes
within an area.The system will calculate a new route dur
-
ing active route guidance if the driver fails
to follow the route guidance. During recalculation,
NEW
RTE
is displayed.
The arrow is not solid.
Start route guidance menu
Route calculation
Route re-calculation

129 Navigation*
Route guidance
After route calculation, the system assists
route guidance using pictorial displays and
navigation announcements.Current navigation announcementsIf a navigation announcement is not readily
understood, it can be repeated at any time. 
Press
6
.
The current navigation announcement
is repeated.
Switching navigation announcements
ON/OFF Switching OFF
During a navigation announcement,
press
1
.
For a short period of time, the message Voice
announcements
muted
is dis
-
played. Now further route guidance takes
place using only the symbols in the dis
-
play. If a new route guidance cycle is
started, the announcements are auto
-
matically switched ON again.
Switching ON manually
Press
6
.
The navigation displays are visible only
with activated route guidance.
To switch to the navigation display
from another display, e.g. from CD
mode, press

or
%
.
Two display examples are shown below.Display example 1The road currently travelled on is indicated
in the status bar at the bottom, in this ex
-
ample
I-80 E
(Interstate 80 East).

The information 1.2 mi indicates the dis
-
tance to the next driving maneuver.
Navigation announcementsWarning
G
Navigation announcements are intended to
direct you while driving without diverting
your attention from the road and driving. Please always use this feature instead of
consulting the map display for directions.
Consulting the symbols or map display for
directions may cause you to divert your at
-
tention from driving and increase your risk
of an accident.
Navigation displays
iThe display unit can be changed to km
or miles using the control system (see
your vehicle Operator's Manual).


136 Navigation*During route guidance


Using the soft keys, diverse menus or dis
-
plays can be requested, and settings can
be adjusted during route guidance.COMAND automatically hides the soft key
displays after a certain period of time.
Press any soft key while route guidance
is activeThe soft key displays appear.
Selectable soft keys
Info
soft key

Provides access to the Info menu ( page
136)
.

Detour
soft key

Provides access to the Detour function ( page
138)
.

St-over
soft-key

Provides access to the stop-over func
-
tion
( page
140)
.

Symbol
soft key

Provides access to setting the symbols
display
( page
143)

Memory
soft key

The map position is stored ( page
126)
.

Display
soft key

Provides access to the Display menu ( page
143)
.

soft key

The map scale will change to display a
more detailed map.

soft key

The map scale will change to display a
map that shows a wider area.

If the soft key displays are shown

( page
136)
, press the
Info
soft key.
The Info menu appears. This shows you
the main destination
and a stopover
destination
that may have been en
-
tered.
Showing soft key displays
Info menu
s

145 Navigation*
During route guidance
You can set the following to be displayed in
the status bar:
Time of arrival/Dist. to Dest.

If the full-screen map display is activat
-
ed
( page
131)
, the estimated time of
arrival and the remaining distance to
the destination will be displayed. If you
have entered a stopover destination ( page
140)
, the corresponding data
will be displayed.

Current-Location display

If the full-screen map display is activat
-
ed
( page
131)
, the following data will
be displayed:
The current position as coordi
-
nates.

The number of satellites that can
currently be received.

The current elevation (ALT = alti
-
tude) above sea level.

No display

The name of the current road is dis
-
played.

In the Display menu
( page
143)
,
press the
Map
soft key.
The possible options appear.

Use

or

to select the desired
option.

Press

.
The map display is switched.

Finally, press the
Back
soft key or wait
for the screen to change.
iDuring route guidance, a symbol will
appear on the left-hand side of the bot
-
tom status bar if map display is
switched ON.
North symbol
:
Fixed map orientation, north is al
-
ways pointing up,

Compass symbol
:
Dynamic map orientation, driving
direction is always pointing up.
Map display menu
iThe COMAND uses GPS to calculate
the elevation above sea level. For rea
-
sons of tolerance, this value may devi
-
ate from the actual value.
iThe solid circle
shows the current
setting.

165 System
System settings
Setting the time The UTC time transmitted by the GPS sat
-
ellites has to be set to the local time zone.

This enhances
correct navigation for routes with time-
dependent traffic guidance, and

correct calculation of the estimated
time of arrival.

Use

or

to select the hours or
the minutes.

Press

or

.
Depending on the selection, hours or
minutes are set.Setting the minutes:

With GPS reception, each time you
press

or

changes the time in in
-
crements of 30 minutes. Without GPS
reception, the time is changed in 1
minute increments.Setting the hours:

Each time you press

or

, the
hours change in increments of 1 hour.

Press the
Back
soft key.
The new setting is stored.
Setting the date 
Use

or

to select the day, the
month or the year.

Press

or

.
Depending on the selection, the day,
the month, or the year is set.

Press the
Back
soft key.
The new setting is stored.
Setting the date/Time format 
Press the
Format
soft key.
You will see the date and time following
the currently selected format, as well
as a list of possible formats.
iThere is no automatic change from day
-
light saving time to standard time.

This has to be changed manually.When you change the time zone, the
clock time also changes automatically.
If you enter an incorrect time, the time
difference remains unchanged when
you change time zone.
iThe date can be set only if GPS recep
-
tion is available.


166 SystemSystem settings
Setting the format: 
Use

or

to select a format.

Press

.
The appropriate format is selected.

Press the
Back
soft key or wait for the
screen to change.
The new setting is stored.
The language setting changes the display
language as well as the language used for
voice instructions in navigation announce
-
ments.
In the System menu
( page
164)
,
press the
Lang.
soft key.
The language list is displayed.
The following options are available:
Instr. cluster settings
:
The system switches to the lan
-
guage already set in the vehicle in
-
strument cluster (
 Vehicle
Operator’s manual).

All other options:

The system switches to the re
-
quested language.
iList entry 1-3: Date formatsList entry 4 and 5: Time formats

(Entry 5 is not visible on the display ex
-
ample below.)Solid circle
: format set

Empty circle
: format not set
Setting the language